Használati útmutató Vitek VTM-LCD43TA

Vitek Monitor VTM-LCD43TA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vitek VTM-LCD43TA (4 oldal) a Monitor kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
VITEK
FEATURES
• 4.3” 480x272 Pixel LCD Screen
• Supports HD-TVI, AHD, and CVBS Cameras
• 800mA 12VDC Power Output to Power Camera
• Coaxitron Support
• Internal 4400mAH Lithium Ion Extended Life
Battery
VTM-LCD43TA
3-in-1 4.3” LCD Service Monitor
Supporting HD-TVI, AHD, and
CVBS Cameras
2
1
2
3
4
5
3
Layout:
1. Video Input / 12VDC Power Output
2. Power Button / Video Input Selection
3. 5VDC Power Input (Mini USB)
4. Charge LED
5. CoC (Control over Coax)
Operation:
1. Remove Test monitor from packaging
2. Connect supplied charging cable to test monitor (right side)
and plug-in transformer to charge the battery the Blue LED
will illuminate when monitor is charging
3. After battery is charged connect the test lead to the top of the
test monitor
4. Connect TVI/AHD camera to the RED connector on test lead
or Analog camera to the YELLOW lead
5. Slide switch on right side of test monitor to HD for TVI/AHD
cameras or CVBS for Analog cameras
6. To power camera via the test monitor use the power adaptor
on the test lead (12VDC 800mA MAX)
7. If camera has CoC (Control over Coax) press Menu button
to access the OSD of camera and use arrow buttons to
navigate through OSD

Termékspecifikációk

Márka: Vitek
Kategória: Monitor
Modell: VTM-LCD43TA

Szüksége van segítségre?

Ha segítségre van szüksége Vitek VTM-LCD43TA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Vitek

Útmutatók Monitor

Legújabb útmutatók Monitor