Használati útmutató Vertex Standard EVX-5300
Vertex Standard
Rádiókommunikáció
EVX-5300
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vertex Standard EVX-5300 (44 oldal) a Rádiókommunikáció kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/44
Programmable Functions/Features
AvailableProgrammableFunctionKeys
2-ToneEncode/Decodeø1
5-ToneEncode/Decodeø1
MDC-1200®Encode/Decodeø1
HornAlert
PA(PublicAddress)
Scan
GroupScanø3
DualWatch
FM-Scan(Follow-MeScan)
TAScan
Encryptionø1
Privacy(Basic/Enhanced)ø2
VOX
TalkAround
Emergency
LoneWorker
TXSaveDisable
DirectChannelEntryø3,4
CodeUp/Downø1,3
CodeSetø1,3
SpeedDialø1
DTMFCodeSetø1,3,4
IDCheckø1,3
TextMessageø2,3
ARTSTMø1/ARTS
II
TM(
AutoRangeTranspondSystem
)
ø1:Analogmodeonly
ø2:Digitalmodeonly
ø3:EVX-5400only
ø4:RequiresOptionalMH-75A8J
EVX-5300
EVX-5400
oPerating manual
EVX-5300 EVX-5400
Unsafe Radiation Distance
Congratulations!
You now have at your ngertips a valuable communications tool: a Vertex Stan-
dard two-way radio! Rugged, reliable and easy to use, your Vertex Standard radio
will keep you in constant touch with your colleagues for years to come, with negli-
gible maintenance downtime.
Please take a few minutes to read this manual carefully. The information presented
here will allow you to derive maximum performance from your radio.
We’re glad you joined the Vertex Standard team. Call on us anytime, because com-
munications is our business. Let us help you get your message across.
Notice !
There are no owner-serviceable parts inside the transceiver. All service jobs
must be referred to an authorized Vertex Standard Service Representative.
Consult your Authorized Vertex Standard dealer for installation of optional
accessories.
Safety/WarNiNg iNformatioN
WARNING - DO NOT operate the EVX-5300/-5400 radio when any
person(s) (bystanders) outside the vehicle are within the distances shown in
the chart at the bottom of this section.
Safety Training information:
Antennas used for this transmitter must not exceed an antenna gain of
0 dBi. The radio must be used in vehicle-mount congurations with a maxi-
mum operating duty cycle not exceeding 50 %, in typical Push-to-Talk con-
gurations.
This radio is restricted to occupational use, work related operations only
where the radio operator must have the knowledge to control the exposure
limits of passengers and bystanders by maintaining the minimum separa-
tion distance shown below.
Failure to observe these restrictions will result in exceeding the FCC RF
exposure limits.
Antenna Installation:
For rear deck trunk installation, the antenna must be located at least the fol-
lowing distance away from rear-seat passengers in order to comply with the
FCC RF exposure requirements.
For roof top installations, the antenna must be placed in the center of the
roof.
VHF Model UHF Model
2.9 Feet (0.89 m)2.1 Feet (0.64 m)
EVX-5300/-5400 OpErating Manual 1
EVX-5300 EVX-5400
IntroductIon
The EVX-5300/-5400 series are a full-featured Digital/Analog transceiver de-
signed for exible mobile and base station business communications in the VHF/
UHF Land Mobile bands. These transceivers are designed for reliable business
communications in a wide variety of applications for a wide range of operating ca-
pabilities.
The EVX-5300/-5400 series operate using the TDMA protocol for spectrum and
power efficiency resulting in lower total equipment cost compared to FDMA.
Digital eliminates noise and static from voice transmit to deliver only the in-
tended voice message crisply and clearly. The EVX-5300/-5400 series feature the
AMBE+2™ vocoder for enhanced voice quality.
The EVX-5300 allows up to 8 memory channels. The EVX-5400 allows up to
512-channel capacity and 32 groups which can each be programmed with an
8-character Alpha-Numeric Tag. Important channel frequency data is stored in the
ash memory, and is easily programmable by a Vertex Standard licensed dealer
using a personal computer with Vertex Standard Programming equipment: FIF-
12 USB Programming Interface, CT-104A (or CT-171) Connection Cable with
CE142 Software. Or, once a single radio is programmed, cloning cable CT-4 can
be used to program additional radios directly.
The pages which follow will detail the many advanced features provided by the
EVX-5300/-5400 series transceiver. After reading this manual, you may wish to
consult with your Network Administrator regarding precise details of the congu-
ration of this equipment for use in your application.
For North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric Ad-
ministration have requested the cooperation of the U.S. Federal Communi-
cations Commission in preserving the integrity of the protected frequency
range 406.0 to 406.1 MHz, which is reserved for use by distress beacons.
Do not attempt to program this apparatus, under any circumstances, for op-
eration in the frequency range 406.0 - 406.1 MHz if the apparatus is to be
used in or near North America.
Termékspecifikációk
| Márka: | Vertex Standard |
| Kategória: | Rádiókommunikáció |
| Modell: | EVX-5300 |
Szüksége van segítségre?
Ha segítségre van szüksége Vertex Standard EVX-5300, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Rádiókommunikáció Vertex Standard
3 Július 2024
2 Július 2024
Útmutatók Rádiókommunikáció
- Rádiókommunikáció Motorola
- Rádiókommunikáció Kenwood
- Rádiókommunikáció Albrecht
- Rádiókommunikáció Stabo
- Rádiókommunikáció ICOM
- Rádiókommunikáció President
- Rádiókommunikáció BaoFeng
- Rádiókommunikáció Team
- Rádiókommunikáció Simrad
- Rádiókommunikáció Furuno
- Rádiókommunikáció Rexon
- Rádiókommunikáció Wouxun
- Rádiókommunikáció Swissphone
- Rádiókommunikáció Wintec
- Rádiókommunikáció Intek
Legújabb útmutatók Rádiókommunikáció
21 Szeptember 2024
17 Szeptember 2024
23 Augusztus 2024
23 Augusztus 2024
23 Augusztus 2024
23 Augusztus 2024
23 Augusztus 2024
22 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024