Használati útmutató Vemer Sequencer 3

Vemer nincs kategorizálva Sequencer 3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vemer Sequencer 3 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
MAC3 S.p.A. - 50013 CAMPI BISENZIO -FIRENZE -
(ITALY) - Via Maestri del lavoro 25/27
TEL.+39 055.88.77.672 - 055.88.77.372 -
055.88.79.276 - FAX. +39 055.88.77.068
e-mail: mac3@mac3.it - www.mac3.it
Nota: gli ingressi dei termici sono solo di segnalazione, non inibi-
scono l'attivazione delle pompe, né in sequenza né singolarmente.
4
General features
The is a device that provides the possibility toSequencer3
control and command 2 or 3 pumps in autoclave systems with
the help of :
- No. 1 working pressure switch PW that activates in
sequence (one at a time) various pumps.
- No. 2 pressure switches (PS1 - PS2) regulated at different
pressures (the pressure of PS1 is higher than that of PS2), but
yet inferior to that of the working pressure switch PW. These
pressure switches control the activation of two other pumps,
the purpose of which is to maintain the water pressure in the
system in the conditions requested when only one pump is
insufficient.
- A float switch prevents the functioning when no water
is present. When there is the presence of water, the contacts of
the float switch are closed (closes high).
Activation of the pumps in sequence by way of the
working pressure switch means that all the pumps connected to
the system are activated in rotation so that it is never the same
pump that starts out first. By using this criteria, all the pumps
can function in a uniform manner thus, avoiding the possibility
that one or more pumps can stop working due to prolonged
inactivity.
The Sequencer3 can function in the automatic or manual
mode by selecting this option by means of an external switch to
be connected to the the appropriate clamps. Two led on the
front panel permit one to see in which mode the device is
functioning; red led = Automatic;
yellow led = Manual.
In the Automatic mode, the controls that come from the
pressure switches are activated and consequently, automatically
activate or deactivate the pumps (power on/off).
In the Manual mode, the activation of the pumps can
only be done manually by way of appropriate push buttons
present on the front panel of the device. By connecting to
terminals 6-7-8-9, it's possible to command the Sequencer3 from
a distance. The control of two or three pumps can be selected
by means of a dipswitch present on inside of the front panel of
the device. With a screwdriver it is possible to remove the front
panel and reach the dipswitch.
SEQUENCER3
Electronic device for the control and
command of 2 or 3 pumps
dis.5812
Elecrtical wiring
SUPPLY VOLTAGE
CONTACTORS
24 23 22 21 20 19 18 17 16 15 14 13
123456789101112
DIPSWITCH
ON
1 2
Automatic
Manual
FS
1
2
PW
PS 2
SW1A
SW2A
COMMON
TS1
TS2
CONT.1
CONT.2
External push button
for manual command
FLOAT SWITCH
PB1 PB2 PB3
WIRING DIAGRAM
Electronic device for the control and command for 2 pumps
Internal push button for manual command
dnegeL
)seludomhtobrofdilav(
SF nidesolc(.nimhctiwstaolF
)retawfoecneserp
WP hctiwserusserpgnikroW
1SP 1hctiwserusserP
2SP 2hctiwserusserP
gnivomerybelbisseccahctiwspiD
.lenaptnorf
1
THERMAL SWITCH
MAC3 S.p.A. - 50013 CAMPI BISENZIO -
FIRENZE - (ITALY) - Via Maestri del lavoro 25/27
TEL.+39 055.88.77.672 - 055.88.77.372 -
055.88.79.276 - FAX. +39 055.88.77.068
e-mail: mac3@mac3.it - www.mac3.it

Termékspecifikációk

Márka: Vemer
Kategória: nincs kategorizálva
Modell: Sequencer 3

Szüksége van segítségre?

Ha segítségre van szüksége Vemer Sequencer 3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Vemer

Vemer

Vemer PR-1DA Útmutató

4 Október 2024
Vemer

Vemer TCR Útmutató

3 Október 2024
Vemer

Vemer Set PC RF8 Útmutató

2 Október 2024
Vemer

Vemer HT NiPt-2P3A Útmutató

22 Szeptember 2024
Vemer

Vemer ADR-D Vision Útmutató

22 Szeptember 2024
Vemer

Vemer Athena.Temp Útmutató

22 Szeptember 2024
Vemer

Vemer FR NTC-4P3D Útmutató

21 Szeptember 2024
Vemer

Vemer LSM-01 Útmutató

18 Szeptember 2024
Vemer

Vemer Phono Útmutató

16 Szeptember 2024
Vemer

Vemer LCR400 Útmutató

13 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Nedis

Nedis NBARF4501FBK Útmutató

7 Április 2025
Soundstream

Soundstream BX-108Z Útmutató

7 Április 2025
Soundstream

Soundstream BX-12 Útmutató

7 Április 2025
Soundstream

Soundstream BX-23Q Útmutató

7 Április 2025
Pulsar

Pulsar SF116 Útmutató

7 Április 2025
Pulsar

Pulsar S108 Útmutató

7 Április 2025
Pulsar

Pulsar PSC12015 Útmutató

7 Április 2025
Soundstream

Soundstream BX-20Z Útmutató

7 Április 2025
ProFlo

ProFlo PF6731ZBN Útmutató

7 Április 2025
ProFlo

ProFlo PFXC1080LSCP Útmutató

7 Április 2025