Használati útmutató Unicol PGW

Unicol Projector accessoire PGW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Unicol PGW (4 oldal) a Projector accessoire kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Revised 05/01/24
01865 767676
sales@unicol.com
www.unicol.com
*Please check model specific details before installing*
PGG / PGL / PGM / PGS / PGW / PGX
Screen Size: Guide Max. Weight: n/a 20kg
2Revised 05/01/24
COMPONENTS
01865 767676
sales@unicol.com
www.unicol.com
INSTALLERS REQUIRED
1
# DESCRIPTION QTY
1Guardbox Body 1
2Locking Plate 1
3Keys for Built-In Lock 2
4Security Bars 3
#TOOLS REQUIRED
14mm & 5mm Allen Keys
2Pozi Head Screwdriver
319mm Spanner
417mm Spanner
3
4
1
2
01865 767676
sales@unicol.com
www.unicol.com
3
Revised 05/01/24
STEP 1
Place projector inside the Guardbox cage. Ensure
that it rests on the two adjustable rail inside the cage.
STEP 2
Drop the security bars into position as shown above.
Make sure that the projector lens is not covered or
restricted by the bars.
STEP 4
Take the locking plate and slide it over the front half
of the top of the Guardbox. This should slide over the
column socket fixings, protecting them from being
tampered with.
Once positioned, use the keys to secure the locking
plate. Take a record of the numbers located on the
keys for replacement purposes.
STEP 3
Before placing the Lcok Slider Plate, place your
ceiling suspension column into the socket. Ensure
that the holes in the column line up with the hole in
the column. Thread the through-bolt through the
hole in the socket and secure.
Next, tighten the grub screws located either side of
the through-bolt hole.

Termékspecifikációk

Márka: Unicol
Kategória: Projector accessoire
Modell: PGW

Szüksége van segítségre?

Ha segítségre van szüksége Unicol PGW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Projector accessoire Unicol

Unicol

Unicol PGG Útmutató

2 Szeptember 2024
Unicol

Unicol PGW Útmutató

2 Szeptember 2024

Útmutatók Projector accessoire

Legújabb útmutatók Projector accessoire

Barco

Barco R9861400 Útmutató

28 Szeptember 2024
Da-Lite

Da-Lite Project-O-Stand 42068 Útmutató

23 Szeptember 2024
Barco

Barco R9832766 Útmutató

15 Szeptember 2024
Barco

Barco R9842370 Útmutató

13 Szeptember 2024
Barco

Barco R9855978 Útmutató

6 Szeptember 2024
My Wall

My Wall HL 41 ML Útmutató

3 Szeptember 2024
Speaka

Speaka SP-PWM-200 Útmutató

3 Szeptember 2024
Speaka

Speaka SP-PWM-100 Útmutató

3 Szeptember 2024
Speaka

Speaka PRB-1 Útmutató

3 Szeptember 2024
Roadinger

Roadinger UP-4 QCL Útmutató

3 Szeptember 2024