Használati útmutató Tripp Lite T013-001-POE

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite T013-001-POE (32 oldal) a Kábelek PC-hez és perifériákhoz kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/32
Owner’s Manual
Cable Continuity Tester
with Power over Ethernet
(PoE) Detection
Model: T013-001-POE
Español 9 • Français 17 • 25
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
16-08-515-933624.indb 1 9/20/2016 9:44:09 AM
2
Package Contents
Product Features
Main Tester Unit
Remote Tester Unit
9V Battery
Owner’s Manual
All-in-One cable tester combines a Main
Tester unit with a Removable Remote Tester
unit
Test cable connectivity to determine a
connection, no connection, short, or crossed
connection
Capable of testing RJ11 and RJ45 cables
Test live Ethernet cables to determine if
power and data are present
Identify the Power Sourcing Equipment type
in a network (Endspan, Midspan or both)
Identify the PoE standard used
IEEE 802.3af (15.4W PoE) or IEEE 802.3at
(30W PoE+)
Compact design specifically tailored for
system integrators and installers
16-08-515-933624.indb 2 9/20/2016 9:44:09 AM
3
Continuity Testing
Notes:
Electrified cabling cannot be used when testing
continuity.
If LED lights appear weak or if the tester unit has
not been used for an extended period, replace
the 9V battery.
When testing an uninstalled patch cable,
the Main and Remote testers may remain
connected. When testing installed cable, the
Remote Tester will need to be removed from
the Main Tester. Connect one end of the cable
to the appropriate connector on the Main
Tester and the other end of the cable to the
appropriate connector on the Remote Tester.
If this is the first time using the product, insert
a 9V battery into the Main Tester units battery
compartment. After inserting the battery,
initiating testing is as simple as connecting
the desired cable and flipping the unit’s On/Off
switch. Turning the switch to the On position
will cause the LEDs to blink fast during testing,
while turning the switch to S will cause LEDs
to blink slow. Otherwise, testing is the same
for both.
16-08-515-933624.indb 3 9/20/2016 9:44:09 AM

Termékspecifikációk

Márka: Tripp Lite
Kategória: Kábelek PC-hez és perifériákhoz
Modell: T013-001-POE

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite T013-001-POE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Kábelek PC-hez és perifériákhoz Tripp Lite

Útmutatók Kábelek PC-hez és perifériákhoz

Legújabb útmutatók Kábelek PC-hez és perifériákhoz