Használati útmutató Trek Domane SL 6 Gen 3

Trek Fiets Domane SL 6 Gen 3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Trek Domane SL 6 Gen 3 (16 oldal) a Fiets kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/16
2020 DOMANE SLR/SL
SERVICE MANUAL
2
1INSTALL COMMON COMPONENTS
A. Install and adjust the seatpost
TOOLS AND MATERIALS REQUIRED
Saddle Lower seal
Seatpost Long stem 5mm
hex
Seatpost wedge and
bolts
Torque wrench
1. Remove any tape or rubber band from around
the seatpost wedge prior to installation.
2. Install the lower seal into the bottom of the
seatpost.
NOTE For full seatpost insertion, you may
need to remove the lower seal.
3. Insert the seatpost into the seatmast. Be sure
to have the wedge placed in the seatpost prior
to insertion.
4. Tighten the bolt just until the seatpost and
wedge are snug. Do not fully tighten yet.
SEATPOST BOLT
5. Install the saddle. Make sure the clamp ear
correctly ts the saddle rail shape.
6. To adjust the angle of the top of the saddle,
loosen the rear pinch bolt, adjust the angle,
then re-tighten the bolt.
7. To adjust the fore/aft position of the saddle,
loosen the side rail clamp bolt, slide the
saddle, then re-tighten the bolt.

Termékspecifikációk

Márka: Trek
Kategória: Fiets
Modell: Domane SL 6 Gen 3

Szüksége van segítségre?

Ha segítségre van szüksége Trek Domane SL 6 Gen 3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Fiets Trek

Útmutatók Fiets

Legújabb útmutatók Fiets