Használati útmutató TP-Link VIGI NVR1008

TP-Link VCR VIGI NVR1008

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TP-Link VIGI NVR1008 (92 oldal) a VCR kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/92
Installation Guide
Network Video Recorder
CONTENTS
Deutsch
�����������������������
English
������������������������
Español �����������������������
ληνικά
�����������������������
13
Français
�����������������������
Italiano
������������������������
Português ���������������������
Suomi������������������������
Nederlands
����������������������
Svenska �����������������������
Norsk
������������������������
Dansk
������������������������
Bahasa Indonesia �������������������
日本語 ������������������������
繁體中文
�����������������������
ไทย ��������������������������
TiếngไViệtไ ����������������������
Türkçe
������������������������
يبرع
�������������������������
77
English
1
Note: images may dier from the actual products.
Hard Drive Installation
For first time installation, please prepare a 3.5-inch hard disk drive (HDD). It is
recommended to use the HDD of enterprise or surveillance level. Before installation,
please disconnect the power from the network video recorder (NVR).
1� Remove the xing screws on the side and back panels to open the cover of the
NVR.
2� Attach the 4 included HDD screws to your hard drive. Do not fasten.
Hard Disk Drive (HDD)
3� Match the 4 screws on the HDD with the 4 holes on the NVR, and insert the HDD
interface into the slot.

Termékspecifikációk

Márka: TP-Link
Kategória: VCR
Modell: VIGI NVR1008

Szüksége van segítségre?

Ha segítségre van szüksége TP-Link VIGI NVR1008, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók VCR TP-Link

Útmutatók VCR

Legújabb útmutatók VCR