Használati útmutató TP-Link Tapo C501

TP-Link Térfigyelő kamera Tapo C501

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TP-Link Tapo C501 (4 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

Outdoor Pan/Tilt 4G LTE Camera

4. Set Up

Quick Start Guide

*Images may dier from actual products.7106511291 REV1.0.0

1. Download App

Download the app from the Tapo

App Store or Google Play, and log in.

01 / Set Up Your Camera

Option 1: Wall Mount Option 2: Overhang Mount Option 3: Pole Mount

02 / Mount Your Camera

Tap the button > Add Device in

the app and select your model. Follow

the app instructions to set up your

camera.

The camera is when set on a table or shelf. Mount the camera via when installing outdoors. not waterproof Option 1-3

Route the camera power cord

and Ethernet cable through the

opening of the bracket. Use two

bracket screws to ax the

bracket and camera.

Route the camera power cord

and Ethernet cable through the

opening of the bracket. Use two

bracket screws to ax the

bracket and camera.

1. Ax the Camera and Bracket

Route the camera power cord

and Ethernet cable through the

opening of the bracket. Use two

bracket screws to ax the

bracket and camera.

1. Ax the Camera and Bracket 1. Ax the Camera and Bracket

Stick the mounting template to the

desired mounting place. Drill four

screw holes according to the

template.

2. Drill Holes

Stick the mounting template to the

desired mounting place. Drill four

screw holes according to the

template.

2. Drill Holes

3. Mount the Camera

Φ=6 mm (15/64 in.) Φ=6 mm (15/64 in.)

Insert four mounting anchors into

the holes, then use the mounting

screws to ax the camera and

bracket over the anchors.

3. Mount the Camera

Insert four mounting anchors into

the holes, then use the mounting

screws to ax the camera and

bracket over the anchors.

Mount the camera on the pole

using two pole-mounting loops*

(loop width ≤ 12 mm).

2. Mount the Camera

Flip the page over to continue.

*Pole-mounting loops are not

included.

3. Power Up

Plug in the power adapter or connect

to a PoE router via an Ethernet cable

to power up your camera.

My Home

Insert a 4G Nano SIM card* into the

card slot. If you use an Ethernet

connection, skip this step.

2. Insert SIM Card

*Supported Frequency Bands:

LTE-FDD: B 1/3/5/7/8/20/28

LTE-TDD: B 38/40/41

Troubleshooting Guide:

Scan the QR code or visit

https://www.tp-link.com/support/faq/4046/

4. Install the Antenna

1) Rotate the antenna

clockwise to attach it.

2) Rotate the SMA connector

clockwise to tighten the

antenna.

3) Adjust the antenna vertically

for the best 4G signal.

4) Re-tighten the connector in

case the antenna is loose.

1) Rotate the antenna

clockwise to attach it.

2) Rotate the SMA connector

clockwise to tighten the

antenna.

3) Adjust the antenna vertically

for the best 4G signal.

4) Re-tighten the connector in

case the antenna is loose.

Note: For the cable connection,

ensure the antenna is properly

installed for waterproof

performance.

Note: For the cable connection,

ensure the antenna is properly

installed for waterproof performance.

Note: For the cable connection,

ensure the antenna is properly

installed for waterproof

performance.

4. Install the Antenna

1) Rotate the antenna clockwise to

attach it.

2) Rotate the SMA connector

clockwise to tighten the

antenna.

3) Adjust the antenna to either an

acute angle or horizontal with

the ceiling for the best 4G signal.

4) Re-tighten the connector in

case the antenna is loose.

3. Install the Antenna

SMA Connector

Pole-mounting loops

SMA Connector

microSD

1. Install the Waterproof Seal/Cap for Power Connectors

2. Install Waterproof Cable Attachments

03 / Install Waterproof Accessories

Install the waterproof seal for the power connectors.

When powered by the adapter

When the Ethernet port connects to a network device the Ethernet port does not connect to a network deviceWhen

Use the waterproof cap to cover the power adapter.

When powered by PoE

Need some help?

Visit https://www.tapo.com/support/

for technical support, the user guide, FAQs,

warranty & more

Install the waterproof cable attachments for the network interface. Make sure each part is securely attached and the waterproof rings are ush to keep out

water.

1) Route the network cable through the following components in

order: x nut, waterproof ring, and then the waterproof jacket.

2) Insert the waterproof ring into the waterproof jacket.

3) Fix the O-ring to the network interface of the camera and connect

the network cables.

4) Attach the network interface with the waterproof jacket, then twist

to lock. Rotate the x nut to secure it to the waterproof jacket.

Fix Nut Waterproof

Ring

O-ring Network

Interface

Waterproof

Jacket

Fix Nut Waterproof

Ring + Plug Network

Interface

Waterproof

Jacket

O-ring

1) Insert the waterproof plug into the waterproof ring, then insert them

into the waterproof jacket.

2) Fix the O-ring to the network interface of the camera. Attach the

network interface with the waterproof jacket, then twist to lock. Rotate

the x nut to secure it to the waterproof jacket.

TP-Link hereby declares that the device is in compliance with the

essential requirements and other relevant provisions of directives

2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The

original EU declaration of conformity may be found at

https://www.tapo.com/support/ce

TP-Link hereby declares that the device is in compliance with the

essential requirements and other relevant provisions of the Radio

Equipment Regulations 2017. The original UK declaration of

conformity may be found at https://www.tapo.com/support/ukca/

Safety Information

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Do not use the device where wireless devices are not allowed.

• Adapter shall be easily accessible.

• Use only power supplies which are provided by manufacturer and in

the original packing of this product. If you have any questions, please

don't hesitate to contact us.

• Keep the device away from re or hot environments. DO NOT

immerse in water or any other liquid.

• Do not disassemble, repair or modify the product.

• Do not use the product if the casing has been broken. Danger of

electric shock.

• Never touch the product with wet hands.

• Do not place near automatically controlled devices such as re

alarms. Radio waves emitted from this product may cause such

devices to malfunction resulting in an accident.

• Observe restrictions on using wireless products in fuel depots,

chemical plants or when blasting operations are in progress.

• Do not use liquid to clean the product. Only use a dry cloth.

• Never put metal objects inside the product. If a metal object enters

the product turn o the circuit breaker and contact an authorised

electrician.

• This product is not intended to be used when providing medical care.

Consult the manufacturer of any personal medical devices, such as

pacemakers or hearing aids to determine if they are adequality

shielded from external RF (radio frequency) energy.

• Do not use this product in health care facilities. Hospitals or health

care facilities may be using equipment that could be sensitive to

external RF energy.

• Do not place heavy objects on top of the product.

• When you leave the product unused for a long time unplug the

product from the power outlet.

• This product may interfere with other electronic products such as

TV, radios, personal computers, phones or other wireless devices.

• Adapter should be used indoors where the ambient temperature is

lower than or equal to 40 ºC.

• Operating Temperature: -30 ºC ~ 60 ºC (-22 °F ~ 140 °F )

Please read and follow the above safety information when operating

the device. We cannot guarantee that no accidents or damage will

occur due to improper use of the device. Please use this product with

care and operate at your own risk.

Appearance

Button Explanation System LED Indication

3IR LEDs

Lens

1Microphone 4White Light LEDs

5System LED

6Reset

8Speaker

9Ethernet Port (PoE Connector)

7microSD Card Slot

11 Nano SIM Card Slot

12 SMA Female Connector

10 DC Power Connector

B n n d g nli ki g re and ree

Blinkin dg re

Blinking beam r

Blinki kln d cg re qui y

S d doli re

So rlid beam

Solid green

Blinking ree klg n c qui y

Starting up

C ted tonnec o the network

C ted tonnec o the cloud

Unstable 4G signal

Neither a SIM card nor an Ethernet cable inserted

C tonnec ing to the network

(for 4G setup)

Camera resetting

Camera updating

RESET Button

Open the silicone cover. While the camera is powered on, press and

hold the RESET button for at least 5 seconds until the System LED

blinks red. The camera will reset and reboot.

microSD Card Slot

Open the silicone cover and insert a microSD card.* Initialize it on the

Tapo app for local recording.

*microSD card not included.

Nano SIM Card Slot

Open the silicone cover and insert a Nano SIM card for a 4G network

connection.

Male Power

Connector

Waterproof

Seal

Female Power

Connector

Waterproof

Cap

5 9 10 11 12

Termékspecifikációk

Márka:	TP-Link
Kategória:	Térfigyelő kamera
Modell:	Tapo C501

Szüksége van segítségre?

Ha segítségre van szüksége TP-Link Tapo C501, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Térfigyelő kamera TP-Link

TP-Link Tapo A100 Útmutató

3 Január 2025

TP-Link Tapo C501 Útmutató

3 Január 2025

TP-Link Tapo D235 Útmutató

3 Január 2025

TP-Link Tapo TC72 Útmutató

3 Január 2025

TP-Link InSight S445 Útmutató

2 Január 2025

TP-Link InSight S445ZI Útmutató

2 Január 2025

TP-Link VIGI C450 Útmutató

19 December 2024

TP-Link InSight S245 Útmutató

10 December 2024

TP-Link Tapo C222 Útmutató

9 December 2024

TP-Link Tapo C230 Útmutató

9 December 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera

D-Link DCS-6210BS Útmutató

6 Január 2025

D-Link DCS-6501LH/E Útmutató

6 Január 2025

D-Link DCS-60 Útmutató

6 Január 2025

D-Link DCS-2103 Útmutató

6 Január 2025

I-PRO WV-S15600-V2L Útmutató

3 Január 2025

Arenti IN1Q Útmutató

2 Január 2025

Philips Series 1000 HSP1000 Útmutató

2 Január 2025

Philips Series 3000 HSP3500 Útmutató

2 Január 2025

Philips Series 3000 HSP3800 Útmutató

2 Január 2025

Lorex W463AQ Útmutató

2 Január 2025