Használati útmutató Total TRHLI1601

Total fúrógép TRHLI1601

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Total TRHLI1601 (11 oldal) a fúrógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/11
BATTERY HAMMER DRILL
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire, and/or serious injury.
Note: Save all warnings and instructions for future reference.Due to our ongoing R&D&I
program, the specifications in this document are subject to change without notice.
1) Work area safety
a. Keep the work area clean and well lit to prevent accidents.
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If using the tool in a damp location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
f. If devices are used for dust extraction and collection, make sure they are
properly connected. Properly use these devices and you will reduce dust-
related hazards.
3
Safety rules for correct use
4) Use and care of battery tools
a. Recharge the battery only with the charger specified by the
manufacturer. An unsuitable charger can create a fire hazard.
b. Use power tools only with specifically designated batteries. Use of other
batteries may create a risk of injury or fire.
c. When the batteries are not in use, keep it away from other metal objects,
such as paper clips, coins, keys, nails, screws, or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals can cause burns or fire.
d. Abusive conditions can cause expulsion of liquid from the battery; avoid
contact. If accidentally contacted, rinse immediately with water. If the
liquid comes into contact with the eyes, also seek medical help. Liquid
expelled from the battery can cause irritation or burns.
e. Do not use a battery or tool that is damaged or modified. They may
exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
f. Do not expose a battery or tool to fire or excessive heat. Exposure to fire
or temperature above 130°C may cause an explosion.
g. Follow all charging instructions. Do not charge the battery or tool outside
the temperature range specified in the instructions. Improper charging
or charging at temperatures outside the specified range may damage
the battery or increase the risk of fire.
5) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
b. Never use damaged batteries. Battery packs should only be serviced by
the manufacturer or authorized service providers.
Double insulation for additional protection
Please read the instruction manual before use.
CE conformity.
Wear safety glasses, hearing protection and a dust mask.
Waste
electrical products or batteries must not be disposed of with
household waste. Please recycle at the appropriate facilities. Check with
your local authority or retailer for recycling advice.
Security alert. Use only accessories supported by the manufacturer.

Termékspecifikációk

Márka: Total
Kategória: fúrógép
Modell: TRHLI1601

Szüksége van segítségre?

Ha segítségre van szüksége Total TRHLI1601, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók fúrógép Total

Total

Total TRHLI1601 Útmutató

17 December 2024

Útmutatók fúrógép

Legújabb útmutatók fúrógép

Festo

Festo DGSC-6-10-P-P Útmutató

25 December 2024
DeWalt

DeWalt D25003 Útmutató

24 December 2024
Makita

Makita HR4002 Útmutató

23 December 2024
Makita

Makita DDF459 Útmutató

22 December 2024
Hyundai

Hyundai HYEA5200X Útmutató

19 December 2024
King Craft

King Craft KCSB 1101 Útmutató

16 December 2024
Topcraft

Topcraft TCSB 512 Útmutató

16 December 2024
Topcraft

Topcraft TCSB 512/1 Útmutató

16 December 2024
Fieldmann

Fieldmann FDV 10253-A Útmutató

15 December 2024
Fieldmann

Fieldmann FDV 211050-E Útmutató

15 December 2024