Használati útmutató Total TP1141806
Total
Polírozó gép
TP1141806
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Total TP1141806 (10 oldal) a Polírozó gép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/10
POLISHER
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electrical shock, fire, and/or serious injury.
The term “power tool” in the warnings refers to your operated (corded) power tool mains-
or battery-operated (cordless) power tool.
Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program,
the specifications in this document are subject to change without notice.
1) Work area safety
a. Keep the work area clean and well lit to prevent accidents.
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If using the tool in a wet location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
f. If devices are used for dust extraction and collection, make sure they are
properly connected. Properly use these devices and you will reduce dust-
related hazards.
3
Safety rules for correct use
4) Use and care of power tools
a. Do not force the tool. Use the correct power tool for each use.
b. Do not use the power tool if its power switch does not work. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool to avoid accidental
starting.
d. Use the power tool, accessories and bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be carried out. Using the power tool for operations other than those
intended could result in a hazardous situation.
e. Store power tools out of the reach of children and do not allow people
unfamiliar with the tool to use it.
f. Carry out regular maintenance on power tools. Check for misalignment or
binding of moving parts, breakage of parts, and any other condition that
may affect the operation of power tools. If it is damaged, have the power
tool repaired before using it. Many accidents are caused by poorly
maintained power tools.
g. Keep accessories clean and sharp, as with proper maintenance they are
less likely to bind and are easier to control.
5) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
Double insulation for additional protection
Please read the instruction manual before use.
CE conformity.
Wear safety glasses, hearing protection and a dust mask.
Waste electrical products must not be disposed of with household waste.
Please recycle at the appropriate facilities. Check with your local
authority or retailer for recycling advice.
Security alert. Use only accessories supported by the manufacturer.
Termékspecifikációk
| Márka: | Total |
| Kategória: | Polírozó gép |
| Modell: | TP1141806 |
Szüksége van segítségre?
Ha segítségre van szüksége Total TP1141806, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Polírozó gép Total
17 December 2024
17 December 2024
Útmutatók Polírozó gép
- Polírozó gép Milwaukee
- Polírozó gép Parkside
- Polírozó gép Bosch
- Polírozó gép Ultimate Speed
- Polírozó gép Einhell
- Polírozó gép Ozito
- Polírozó gép Makita
- Polírozó gép Güde
- Polírozó gép Black & Decker
- Polírozó gép PowerPlus
- Polírozó gép Metabo
- Polírozó gép HiKOKI
- Polírozó gép Porter-Cable
- Polírozó gép DeWalt
- Polírozó gép Kalorik
- Polírozó gép Vonroc
- Polírozó gép Panduit
- Polírozó gép Holzmann
- Polírozó gép Cocraft
- Polírozó gép Craftsman
- Polírozó gép Skil
- Polírozó gép Sun Joe
- Polírozó gép Westfalia
- Polírozó gép Rikon
- Polírozó gép Full Boar
- Polírozó gép Royal Catering
- Polírozó gép Robust
- Polírozó gép Einhell Bavaria
Legújabb útmutatók Polírozó gép
25 December 2024
4 Október 2024
21 Szeptember 2024
8 Szeptember 2024
4 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024