Használati útmutató Total TCBNLI2001
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Total TCBNLI2001 (17 oldal) a tűzőgép kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/17
BATTERY NAILER
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire, and/or serious injury.
Note: Save all warnings and instructions for future reference. Due to our ongoing I+D+I
program, the specifications in this document are subject to change without notice.
1) Work area safety
a. Keep the work area clean and well lit to prevent accidents.
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If using the tool in a damp location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock.
g. Make sure the mains voltage is the same as the voltage on the tool's
nameplate. Remove plug from outlet before making any adjustments or
servicing.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
3
f. If devices are used for dust extraction and collection, make sure they are
properly connected. Properly use these devices and you will reduce dust-
related hazards.
4) Use and care of power tools
a. Do not force the tool. Use the correct power tool for each use.
b. Do not use the power tool if its power switch does not work. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool to avoid accidental
starting of the tool.
d. Use the power tool, accessories and bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be carried out. Using the power tool for operations other than those
intended could result in a hazardous situation.
e. Store power tools out of the reach of children and do not allow people
unfamiliar with the tool to use it.
f. Keep power tools in good condition. Check for misalignment or binding of
moving parts, breakage of parts, and any other conditions that may affect
the operation of power tools. If it is damaged, have the power tool repaired
before using it. Many accidents are caused by poorly maintained power
tools.
g. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
5) Battery use and care
a) Recharge the battery only with the charger specified by the manufacturer.
An unsuitable charger can create a fire hazard.
b) Use specifically designated batteries. Use of other batteries may create a
risk of injury or fire.
c) When the batteries are not in use, keep it away from other metal objects,
such as paper clips, coins, keys, nails, screws, or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals can cause burns or fire.
d) Abusive conditions can cause expulsion of liquid from the battery; avoid
contact. If accidentally contacted, rinse immediately with water. If the
liquid comes into contact with the eyes, also seek medical help. Liquid
expelled from the battery can cause irritation or burns.
e) Do not use a battery or tool that is damaged or modified. They may exhibit
unpredictable behavior resulting in fire, explosion, or risk of injury.
f) Do not expose a battery or tool to fire or excessive heat. Exposure to fire
or temperature above 130°C may cause an explosion.
g) Follow all charging instructions. Do not charge the battery or tool outside
the temperature range specified in the instructions. Improper charging or
charging at temperatures outside the specified range may damage the
battery or increase the risk of fire.
6) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
Termékspecifikációk
| Márka: | Total |
| Kategória: | tűzőgép |
| Modell: | TCBNLI2001 |
Szüksége van segítségre?
Ha segítségre van szüksége Total TCBNLI2001, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók tűzőgép Total
17 December 2024
Útmutatók tűzőgép
- tűzőgép Whirlpool
- tűzőgép Milwaukee
- tűzőgép Parkside
- tűzőgép Bosch
- tűzőgép Makita
- tűzőgép Rapid
- tűzőgép Sencor
- tűzőgép Hitachi
- tűzőgép Rexel
- tűzőgép Klein Tools
- tűzőgép Fieldmann
- tűzőgép PowerPlus
- tűzőgép DEDRA
- tűzőgép Metabo
- tűzőgép RYOBI
- tűzőgép HiKOKI
- tűzőgép Porter-Cable
- tűzőgép DeWalt
- tűzőgép Silverline
- tűzőgép Holzmann
- tűzőgép Rapoo
- tűzőgép President
- tűzőgép Craftsman
- tűzőgép Targus
- tűzőgép Sun Joe
- tűzőgép Kensington
- tűzőgép Proline
- tűzőgép Meister
- tűzőgép Aqua Joe
- tűzőgép Iluv
- tűzőgép Surtek
- tűzőgép POWERNAIL
- tűzőgép Werckmann
- tűzőgép Neo
- tűzőgép Syscom
- tűzőgép MSW
- tűzőgép CTA Digital
- tűzőgép Mannesmann
- tűzőgép Smart365
Legújabb útmutatók tűzőgép
9 December 2024
9 December 2024
7 December 2024
15 Október 2024
2 Október 2024
1 Október 2024
23 Szeptember 2024
12 Szeptember 2024
3 Szeptember 2024
2 Szeptember 2024