Használati útmutató Tor Rey LSQ-40L

Tor Rey mérleg LSQ-40L

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tor Rey LSQ-40L (24 oldal) a mérleg kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
LSQ-40L
LABEL PRINTING SCALE
QUICK START
MANUAL
REV 1.0
PAGE 1
INDEX
Before you begin…………………………………………………………2
Cleaning the scale
Requirements for using a computer to program
Setting up scale for first use………………………………………………..4
Testing printer
Printing your first label……………………………………………………..5
Setting up the network…………………………………………………..6
Connecting the devices
Installing the software
Configuring you computer
Configuring your scale(s)…………………………………………………..7
Starting up the software…………………………………………………8
Adding scales to the network
Configuring general information…………………………………………..9
Adding products………………………………………………………..10
Moving products to/from scale……………………………………………11
Access Direct
General configuration…………………………………………………..12
Bar code setup
Printed text on labels………………………………………………...13
Headlines
Passwords
Programming using the keyboards…………………………………………14
Entering store information
Edit scrolling message……………………………………………….…15
Configuration………………………………………………………….16
Setting up label print……………………………………………………17
Setting up bar code
Placing text on label………………………………………………….18
Set up text on label……………………………………………………...…19
Add plu’s…………………………………………………………………..20
Key assignation
Troubleshooting……………………………………………………………22
Page 2
BEFORE YOU BEGIN
Please read this section carefully. The following has some important safeguards to
prevent damage or failure of your scale.
CLEANING THE SCALE:
1). You may use stainless cleaner or mild soap to wipe down the metal areas of the
scale. The keyboards and display should be wiped down with a damp cloth only.
While the keyboards and display are reasonably sealed, do not allow liquids to get
between the plastic surfaces and the metal.
2). Use only the supplied cleaning kit to clean the print head. Do not use sharp
objects around the print head or the pinch roller below it. Damaging these parts will
cause your label printouts to be unreadable or you may even cause internal damage
to the scale.
3). Do not immerse the power supply in water. This will cause possible electrical
shock and failure of the adapter. Unplug adapter from power and wipe down with a
damp cloth. Do not spray the adapter with cleaning fluids.
4). Keep the print cartridge area clean of any food or other debris. If contaminants
are picked up by the labels and brought across the print head, it can cause labels to
print poorly. This can also damage the print head.
COMMUNICATIONS WITH THE SCALE:
If you are going to program your scale using a personal computer, here are a few
things you will need.
1). You will need to purchase a network adapter (hub) and two (2) category 5 cables.
These can be purchased from electronics or department stores that sell computer
equipment. A network adapter allows you to plug your computer and scale(s) into
one hub. NOTE: You cannot plug the scale directly into your computer. Being your
scale is actually a computer, all computers that communicate with each other
require a network adapter to control data flow between machines.

Termékspecifikációk

Márka: Tor Rey
Kategória: mérleg
Modell: LSQ-40L

Szüksége van segítségre?

Ha segítségre van szüksége Tor Rey LSQ-40L, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mérleg Tor Rey

Tor Rey

Tor Rey PC-80L Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey EQB-50/100 Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey SR-50/100 Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey PC-40L Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey WLS-40L Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey PC-80LT Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey PC-40LT Útmutató

21 Augusztus 2024
Tor Rey

Tor Rey LSQ-40L Útmutató

21 Augusztus 2024

Útmutatók mérleg

Legújabb útmutatók mérleg

Kern

Kern MGB 150K100 Útmutató

6 Április 2025
Teesa

Teesa TSA0813 Útmutató

3 Április 2025
Tanita

Tanita BC-531 Útmutató

2 Április 2025
Sencor

Sencor SBS 2507 Útmutató

1 Április 2025
Kern

Kern PCD 300-3 Útmutató

1 Április 2025
Exakta

Exakta Premium Útmutató

31 Március 2025
Kern

Kern FCE 3K-3A Útmutató

30 Március 2025
Kern

Kern TEFS 500-2-A Útmutató

30 Március 2025
Kern

Kern MPL 200K-1P Útmutató

30 Március 2025