Használati útmutató TechniSat Viotenne 55
TechniSat
Satellietantenne
Viotenne 55
Olvassa el alább 📖 a magyar nyelvű használati útmutatót TechniSat Viotenne 55 (126 oldal) a Satellietantenne kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/126
VIOTENNE 55
Installation
instructions
EN
EN
EN
ENEN
FR
FR
FR
FRFR
PL
PL
PL
PLPL
NL
NL
NL
NLNL
ES
ES
ES
ESES
IT
IT
IT
ITIT
PT
PT
PT
PTPT
CZ
CZ
CZ
CZCZ
SK
SK
SK
SKSK
RU
RU
RU
RURU
NO
NO
NO
NONO
SV
SV
SV
SVSV
FI
FI
FI
FIFI
DÄ
DÄ
DÄ
DÄDÄ
SL
SL
SL
SLSL
TR
TR
TR
TRTR
HU
HU
HU
HUHU
DE
DE
DE
DEDE
1. Installing the outside unit
Before commencing the installing process, use the following illustration and table to ensure
that everything that is needed to install the VIOTENNE 55 outside unit has been supplied.
48114 7
6 11/12/14 2 10 3 9/1412
5 14 11/13/14
Number Quantity Item
1 1 Reflector
2 1 Reflector support
3 1 LNB arm
4 1 LNB holder
5 1 Rotating prism
6 1 U-shaped bolt
7 1 Retaining bar
8 4 M6 screw x 12 cross slot
9 1 M6 screw x 16 hexagonal socket
10 1 M6 screw x 35 hexagonal socket
11 2 M6 screw x 65 hexagonal socket
12 4 M6 flat washer x 12
13 2 M6 flat washer x 17
14 10 M6 nut hexagonal
1 Installation instructions
2
To install the outside unit proceed as follows:
Install the retaining bracket on the rotating prism
> Insert screw 6
6
6
66 through the slot in the rotating prism 5
5
5
55 so that the thread points away
from the rotating prism.
> Insert retaining bar 7
7
7
77 into screw 6
6
6
66 as shown in the illustration.
> In each case insert one flat washer 12
12
12
1212 onto the two threaded ends of the screw
6
6
6
66
and screw on a nut , turning it several times.14
Install the rotating prism on the reflector support
> Insert the rotating prism onto reflector support so that the hole in the rotating prism 5 2 5
and the top hole in the reflector support are positioned on top of each other.2
> Insert a screw through a flat washer and into the hole of the rotating prism . 11 12 5
> On the other side, place a flat washer onto the screw , put a nut onto the12 11 14
threads and hand tighten.
> Turn the rotating prism so that its lower corner is pointing at the elevation angle EL,5
corresponding to your location.
> Insert a second screw through the flat washer and into the hole in the reflector11 13
support beneath the rotating prism .2 5
> On the other side, place a flat washer onto the screw , put a nut onto the13 11 14
threads and gently tighten.
Install the swivelling prism on the reflector support
> Hold the reflector in front of reflector support , as shown in the illustration.1 2
> Insert one nut into each of the holes provided on reflector support . 14 2
> Now connect up the reflector and reflector support to each other using the 41 2
screws .8
Fitting the LNB arm onto the reflector support
> Insert LNB arm into the opening on the front of reflector support and push it in3 2
fully, so that it is free of play as it sits in the opening.
If necessary, tap LNB arm gently from the front. If you do so, please ensure that3
you do not bend LNB arm .3
> Insert screw through the hole and screw it into a nut . 10 14
Fitting the LNB onto the LNB arm
> Separate the two parts of the LNB holder from each other and remove the two4
connecting bond bridges.
> Hook the two parts of LNB holder up to each other on the top side.4
> Place the LNB into the opening of LNB holder (the LNB connections must be4
pointing downwards at the back) and fold them together.
> Insert a nut into the LNB holder and screw these together using screw .14 9
> Now insert LNB holder onto LNB arm and ensure that the former hooks into 4 3
LNB arm .3
3
EN
EN
EN
ENEN
Termékspecifikációk
| Márka: | TechniSat |
| Kategória: | Satellietantenne |
| Modell: | Viotenne 55 |
Szüksége van segítségre?
Ha segítségre van szüksége TechniSat Viotenne 55, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Satellietantenne TechniSat
11 Július 2024
Útmutatók Satellietantenne
Legújabb útmutatók Satellietantenne
22 Szeptember 2024
27 Augusztus 2024
27 Augusztus 2024
26 Augusztus 2024
25 Július 2024
17 Július 2024
14 Július 2024