Használati útmutató Teac LS-301

Teac hangszóró LS-301

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Teac LS-301 (24 oldal) a hangszóró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/24
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO NEDERLANDS SVENSKA
OWNER’S MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
GEBRUIKERSHANDLEIDING
BRUKSANVISNING
Coaxial 2-Way Speaker System
LS-301
Z
3-530008-029642
2
Safety instructions 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before use 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the speakers 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the speakers 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before useTable of contents
Safety instructions
Checking the included accessories
In the unlikely event that any of the following included items is missing or
damaged, please contact the store where you purchased the product.
Speaker cables (1.8 m or 6 ) × 2'
Cork speaker feet × 8
Owner's manual (this document) × 1
oKeep this manual in a safe place for future reference.
Warranty × 1 (for customers in the USA and Canada only)
oSee page 23 for information about the warranty in Europe and other
countries or areas.
Product registration
Customers in the USA, please visit the following TEAC website to register
your TEAC product online.
http://audio.teac.com/support/registration/
Precautions for use
oDo not strike the enclosure (cabinet) or front surface Saran Fiber with hard
objects. Doing so could cause scratching or damage the speaker units.
oAvoid contact with rubber and vinyl for long periods of time, because it
could damage the surface.
oThis product has been designed to minimize magnetic effects, but you
should not place cards, tapes and discs that use magnetic recording or
other items that are easily affected by magnetic force on top of it. Failure
to do so could result in data loss or damage.
oListen within an appropriate input level range from the amplifier.
Excessive input could damage the speaker units.
Moreover, even if the input level is less than the maximum, signals with a
frequent clipping, for example, will have a negative impact on the speaker
units. Please be careful to prevent distortion of the audio at the amplifier.
Cleaning
oWhen the surface becomes dirty, use a soft dry cloth to wipe it clean. Do
not wipe it with finemeshed cleaning cloths, chemical cleaning cloths,
thinner, abrasives or similar materials. Doing so could damage the surface.
oUse a clothing brush or a similar tool to remove dust that sticks to the
Saran Fiber.
Company names and product names in this document are the trademarks or
registered trademarks of their respective owners.
Thank you for choosing TEAC.
Read this manual carefully to get the best performance from this unit.
To use this product safely
V CAUTION
Please read the following cautions carefully in order to prevent injury to
yourself or others and damage to property.
Before connecting to an amplifier or similar equipment, turn off the
power, carefully read the manuals of the equipment that you are
connecting and follow their instructions.
Always use the specified cords to make connections.
Minimize the volume before turning the power on.
Failure to do so could cause sudden loud noises that might harm your
hearing or cause other trouble.
Do not install in an unstable location, such as on an unstable stand
or on a slope, or in a location with frequent vibrations.
It could fall down or fall over, causing injury.
Do not use for long periods of time to listen to distorted audio.
Doing so could cause the speaker units to generate heat, leading to fire or
injury.
3
ENGLISH
Connecting the speakers (1)
Speaker cables
oUse the included speaker cables or commercially-available cables
designed for speakers.
oWe recommend using the shortest speaker cables possible.
oWe recommend using left and right speaker cables of the same length.
CAUTION
Before connecting
Always turn the amplifier's power OFF before connecting speakers.
After connecting
Turn the volume down completely before turning the amplifier's power
ON to prevent sudden loud noises.
Confirm that the speaker terminals have been connected correctly and
that cables are not contacting other terminals.
Connecting the cables
Bare/sleeved wire
Insert the core wire through the hole
in the terminal completely and tighten
the cap firmly.
Spade lugs
Place the spade around the terminal
and tighten the cap firmly.
oWhen using spade lugs to connect
the speakers, they should have an
inside diameter of at least 8 mm
(3/8 )."
Banana plugs
Tighten the cap
After connecting the banana plug to
the speaker cable, insert the plug into
the terminal.
oCarefully read the instructions for
the banana plugs that you are
using.
Precautions for installation
oDo not install in a location that becomes hot, including places exposed to
direct sunlight or near heating equipment. Doing so could cause damage.
oDo not install in a location that becomes humid, including near humidifiers.
Moreover, do not install in a location that become smoky. Doing so could
cause damage.
oDo not place obstacles between the speakers and the listening position.
Obstacles block the direct sound, which can change the sound quality.
oIdeally, no items that reflect sound or resonate should be in the nearby
environment. For example, glass doors sometimes resonate. To prevent
this, fix them securely or use thick curtains or similar materials to absorb
sound.
In addition, parallel walls make it easy for standing waves to occur, so
place furniture to disrupt parallel surfaces and use thick curtains or similar
materials to absorb sound.
Speaker placement
oFor stereo playback, the left and right speakers should usually be placed
so that they form an equilateral or isosceles triangle with the listener at
the top corner.
Listening position
Attaching cork speaker feet (included)
When installing these speakers, you can attach the included cork speaker
feet to the bottoms of the speakers if desired.
oAttaching the cork speaker feet could change the sound quality. Use of
the feet is optional.
oAttaching the cork speaker feet should reduce rattling caused by uneven
contact between the speaker and floor surfaces.
Setting up the speakers

Termékspecifikációk

Márka: Teac
Kategória: hangszóró
Modell: LS-301

Szüksége van segítségre?

Ha segítségre van szüksége Teac LS-301, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Teac

Teac

Teac S-300HR Útmutató

29 Július 2024
Teac

Teac LS-301 Útmutató

21 Július 2024
Teac

Teac SR-L280i Útmutató

20 Július 2024
Teac

Teac LS-H265 Útmutató

19 Július 2024
Teac

Teac LS-M100 Útmutató

8 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025
Trust

Trust Tytan GXT 658 Útmutató

3 Április 2025
Turbosound

Turbosound PQ15-YB Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSF-10.5 Útmutató

3 Április 2025
Klipsch

Klipsch kO-R1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SB-1 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RB-5 II Útmutató

3 Április 2025
Klipsch

Klipsch Contractor CS-800-R Útmutató

3 Április 2025