Használati útmutató TDE Instruments Digalox DPM72-MPN+-DIN

TDE Instruments nincs kategorizálva Digalox DPM72-MPN+-DIN

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TDE Instruments Digalox DPM72-MPN+-DIN (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Digalox® DPM72-MP+/MPN+-DIN
Instruction manual (Rev-2023-03)

Package contents: 
1. Safety instructions
!"      #  $    %  "&'  (    
)
"$"$#$#*""
#)
WARNING: The measurement inputs of the device can carry life-threatening
voltages!
When working on the device hazardous voltages must not be connected to
the device! The terminals J1-J12 are not isolated from the measuring
circuit.
The device must not be used as the only protective device or protective
shutdown.
+%"&""%),
"& $ "   # # -.%
) )
/%.%%01-02#.%$"
.%&.%
&)3.%45678.%$"
4456)
%%'
%"&%&$$'
7$#%9"&$".%)
2. Meaning of symbols
:.
7$&%"'
/%9"
----- ----- 1 / 8
3. Intended use
Measurement of current, voltage, power and frequency in the specified measuring
ranges.
Indoor use non condensing, non corrosive.
Mounting on DIN rail or screwing on.
Failure to comply with these instructions will void all guarantee and warranty.
4. Description
A variety of measurement types (volt AC/DC, ampere AC/DC, frequency, power, cos
phi) are supported. As individually adjustable threshold values are reached, two
galvanically isolated alarm outputs enable the device to perform switch-on or switch-
off operations.
Using the configuration software “Digalox
® Manager” the device can be configured,
e.g. thresholds for alarm output, hysteresis, and more.
Depending on the model, measured values can be transmitted via XBEE radio
technology or RS485 Modbus interface. In addition, the device features a counting
function with data retention. This enables operating-hours-counters or time-counters
for exceeding and falling below threshold values, as well as ampere-hour and
energy meters. The device can be mounted on DIN rails as well as on other
backgrounds through corresponding holes in the housing.
In the “Downloads” area of www.digalox.com you can find the latest version of the
instruction manual and the software “Digalox
® Manager”.
----- ----- 2 / 8
5. Product overview
3
2
5
4
1
1 2 optocoupler switch outputs
2 Jumper pins J1–J12
3 Supply voltage input
4 Interface (XBEE / RS485)
5 Measurement inputs
6. Mounting
Hook the device into the top-hat rail from above and then press it at the bottom until
the latch engages.
Alternatively, attach the device with 4 screws.
----- ----- 3 / 8

Termékspecifikációk

Márka: TDE Instruments
Kategória: nincs kategorizálva
Modell: Digalox DPM72-MPN+-DIN

Szüksége van segítségre?

Ha segítségre van szüksége TDE Instruments Digalox DPM72-MPN+-DIN, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva TDE Instruments

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025