Használati útmutató Taylor THD32D

Taylor konyhai mérleg THD32D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Taylor THD32D (2 oldal) a konyhai mérleg kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

One Year Limited Warranty

Taylor warrants this product to be free from defects in material or

workmanship for one (1) year from date of original purchase. It

does not cover damages or wear resulting from accident, misuse,

abuse, commercial use, or unauthorized adjustment and/or repair.

If service is required, do not return to retailer.

Do not return to retailer. Should this product require service (or

replacement at our option) please pack the item carefully and return

it prepaid, along with store receipt showing date of purchase and

a note explaining reason for return to:

There are no expressed warranties except as listed above. This

warranty gives you specific legal rights, and you may also have

other rights which vary from state to state.

Made to our exact specications in China

www.taylorusa.com

THD32, THD32D

THD50, THD100

Precision Performance since 1851

Heavy Duty Mechanical

Portion Control Scales

Instruction Manual

Model THD32

shown

PRECISION PRODUCTS

2220 Entrada Del Sol

Las Cruces, New Mexico 88001

Congratulations on your purchase of a Taylor ® Heavy Duty Mechanical Portion

Control Scale. Your Taylor®

Scale is an example of superior design and craftsman-

ship. Please read this instruction manual carefully before use. Keep these

instructions handy for future reference.

Assembly

1. The THD32 and THD32D models are shipped with their platforms

wrapped in a corrugated insert with wing nuts holding them in.

Remove the wing nuts and attach the platform to the top of the

post, securing with the wing nuts.

2. The platform will assemble or is assembled to the inverted “U”

shape post on top of the scale. Remove the (2) wood inserts that

are taped to the posts and discard. (all models)

General Operation

1. Place the scale on a hard, level surface.

2. Before using the scale, allow it to reach room temperature, then

perform the following steps:

Place weight on scale and allow pointer to come to rest.

B. Remove weight and allow pointer to come to rest.

C. After repeating this cycle two or three times, adjust

pointer to zero using adjustment knob located on top of

scale body, beneath platform, and repeat the adjustments

until zero is stabilized.

3. If scale is relocated, readjustment to zero may be required. To do

so, repeat above steps. When weighing, evenly distribute weight

on platform.

Dashpot Feature (Model THD32D only)

This model has an adjustable air dampener (dashpot) that reduces the

platform oscillations when a weight is applied. It is adjusted by the

factory for proper operation. If adjustment is necessary:

1. While facing the scale, turn it so the left side is facing you. Remove

one screw at the top of the side panel, tip it outward and lift up to

Fig.1 Fig.2

remove. The dashpot is attached to the rear panel of the scale case.

2. There is a red slotted head brass screw with a coil spring under it.

Turn the screw clockwise to increase the dampening affect and

counter clockwise to lessen. Be careful when tightening to prevent

bottoming the adjustment screw and potentially stripping the

threads in the plastic body of the dashpot.

3. Reinstall the cover by placing the 2 tabs at its bottom into the slots

in the scale case and attach at the top with one screw as it was.

Care and Maintenance

1. The body and mechanism are not dishwasher safe. Immersing the

scale in water may trap liquid between lens and body that can not

be effectively dried-out. Damage will void warranty.

2. Caution…An occasional wiping with a soft cloth and mild soap will

keep your Taylor® scale clean and attractive. Do not use abrasive

cleaners. Your Taylor® scale does not require oiling or lubrication

of any kind.

3.Do not tamper with unit’s internal components. Doing so will

invalidate the warranty on this unit and may cause damage. The

unit contains no user-serviceable parts.

4. The lens can be removed by first pulling the bezel away from the

scale case (see Fig. 1), then remove the lens (see fig. 2). You can

clean the inside of the lens this way, but be careful to not bend the

red pointer. Do the reverse to reattach.

Termékspecifikációk

Márka:	Taylor
Kategória:	konyhai mérleg
Modell:	THD32D

Szüksége van segítségre?

Ha segítségre van szüksége Taylor THD32D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók konyhai mérleg Taylor

Taylor 384521 Útmutató

10 Szeptember 2024

Taylor 5302553 Útmutató

31 Augusztus 2024

Taylor THD50 Útmutató

21 Augusztus 2024

Taylor THD32 Útmutató

21 Augusztus 2024

Taylor TE10SSW Útmutató

21 Augusztus 2024

Taylor Biggest Loser 1037BL Útmutató

21 Augusztus 2024

Taylor Biggest Loser 3847BL Útmutató

21 Augusztus 2024

Taylor 3701KL Útmutató

21 Augusztus 2024

Taylor TE10R Útmutató

21 Augusztus 2024

Taylor TS5 Útmutató

21 Augusztus 2024

Útmutatók konyhai mérleg

Legújabb útmutatók konyhai mérleg

Jata 765 Útmutató

15 Október 2024

Soehnle Anna 67003 Útmutató

15 Október 2024

Korona Ronda Útmutató

14 Október 2024

AcuRite 00940 Útmutató

14 Október 2024

Beurer KS 59 Útmutató

14 Október 2024

Solac BC6260 Útmutató

13 Október 2024

Ardes AR1PA2V Útmutató

13 Október 2024

Jata 773 Útmutató

13 Október 2024

Hitachi HKS210 Útmutató

13 Október 2024

Korona Mia Útmutató

12 Október 2024