Használati útmutató Taylor 3907

Taylor konyhai mérleg 3907

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Taylor 3907 (4 oldal) a konyhai mérleg kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

3907

Digital Kitchen Scale

Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor® scale is an example of superior

design and craftsmanship. Please read this instruction manual carefully before use. Keep these

instructions handy for future reference.

BATTERY INFORMATION

This scale operates on 3 batteries (included). Always replace all batteries at the same time; do not “AAA”

combine old and new batteries. Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-

cadmium) batteries. Replace batteries if “Lo” appears on the display, or the readings grow dim or

irregular. To replace the batteries:

1. Open the battery compartment on the bottom of the scale

2. Remove the old batteries from the compartment.

3. Place the batteries into the battery compartment as indicated by the polarity symbols marked in the

compartment.

4. Replace the battery compartment cover.

NOTE: Please recycle or dispose of batteries per local regulations.

WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle

batteries. If swallowed, seek medical attention immediately.

PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries

if the scale will not be used for a long period of time.

GENERAL WEIGHING OPERATION

1. Place the scale on a hard, level surface.

2. Press the “ ” button to turn the scale on. The display will turn on and show zero when it is ready

for use. If the display does not show zero, press the “tare” button. The scale will reset (tare) to zero.

3. Your scale weighs in pounds/ounces (lb oz). To switch to grams (g), press the “UNIT” button to

change the units of measurement.

4. Place the item to be weighed on the center of the platform. The weight will display. As you add

weight, the weight displayed increases.

5. The scale will turn off automatically after approximately 1 minute of non-use or if there is no change

in weight in approximately 3 minutes. To turn the scale off manually, press and hold the “ ” button

until the scale turns off.

TARE OPERATION

You may wish to weigh ingredients in a bowl or other container (not included). In this case, you will need

to tare, or offset, the weight of the bowl so that only the weight of the ingredients is displayed.

1. Choose a container that will safely balance on the platform without tipping or falling. Do not use a

heavy container, as this might reduce the maximum capacity of the scale.

2. While the scale is off, place the empty container on the scale platform. Turn the scale on. The

display will turn on and then show zero. The weight of the container has been zeroed out.

3. Add the ingredient to be weighed. The weight of the ingredient alone will display.

4. The weight of additional ingredients may be tared out as well. For example, if a recipe calls for 8oz

of rice and 8oz of beans, place the rice into the bowl. Once the correct amount of rice is weighed,

press the “TARE button to reset the display to zero. Add the 8oz of beans. Both ingredients have ”

been accurately weighed in the same bowl.

5. When weights have been tared out, the display will show a negative number when the items are

removed from the scale. Press the “ ” button to reset the scale back to zero for a new TARE

measurement.

HOLD FUNCTION

When the “HOLD” function is turned on, the LCD screen will continue to display the weight after the

item is removed from the platform. To turn on the “HOLD” function:

1. While the scale is on, place the item to be weighed on the platform.

2. Press the “HOLD” button “HOLD” icon appears. and the The weight is locked in and the items on the

platform can be removed.

3. To release the “HOLD” function, press the “HOLD” button again. “HOLD” will disappear from the

screen. The “HOLD” function is automatically disabled when the scale turns off.

Notes:

• Other functions will not operate when the scale is in the “HOLD” mode.

• The “HOLD” function can only operate if the weight is stable on the platform. If the weight is

unstable, check to see that the scale platform rests properly on the scale. If necessary, move the

item slightly on the platform until the weight locks in.

PRECAUTIONS

1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use

detergents, excess water, treated cloths, harsh cleaning agents, or sprays. DO NOT immerse the

electronic scale in water or wash in a dishwasher.

2. Do not tamper with the scale’s internal components. Doing so will invalidate the warranty on this

unit and may cause damage. The scale contains no user-serviceable parts.

3. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts. Avoid

rough treatment. Treat it with care to ensure the best performance.

4. This scale is intended for home/consumer use only. It is not intended for commercial or medical use.

5. This scale is designed to read weights up to lb x 0.01 oz / 22 10000 g x 0.1 g. To prevent damage, do

not place more than 22 10 lb / 000 g on it.

6. Do not store scale where you store cleaning chemicals. The vapors from some household products

may affect the electronic components of your scale. Do not store scale on its side.

7. This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do

not store anything on the scale.

8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the battery if the scale

will not be used for a long period of time.

9. “UnSt” = Unstable Warning. Should “UnSt” appear on the display, this indicates the scale is unstable.

Place the scale on a hard, level surface during use.

10. “O-Ld” = Overload Warning: Should “O Ld” (overload) appear on the display during a weighing, this -

indicates that the maximum weighing capacity has been exceeded. Remove the weight immediately;

otherwise, permanent damage could occur.

Party issuing Supplier’s Declaration of Conformity &

Responsible party U.S. Contact information: –

Taylor Precision Products

2311 W. 22nd Street, Suite 200

Oak Brook, IL 60523

Equipment:

Product Name: Kitchen Scale

Model No.: 3907

Trade Name: Taylor

We declare under our sole responsibility that the above referenced product has been tested according

to FCC requirements and this device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on. The user is encouraged to try

to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

ONE (1) YEAR LIMITED WARRANTY

Taylor® warrants this product to be free from defects in material or workmanship (excluding batteries)

for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or

wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or

repair. If service is required, do not return to retailer. Should this product require service (or

replacement at our option), please pack the item carefully and return it prepaid, along with store receipt

showing the date of purchase and a note explaining reason for return to:

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.taylorusa.com

Email: prodsupport@taylorusa.com

There are no expressed warranties except as listed above. This warranty gives you specific legal rights,

and you may have other rights which vary from state to state.

Termékspecifikációk

Márka:	Taylor
Kategória:	konyhai mérleg
Modell:	3907

Szüksége van segítségre?

Ha segítségre van szüksége Taylor 3907, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók konyhai mérleg Taylor

Taylor TE22OS Útmutató

28 December 2024

Taylor 384521 Útmutató

10 Szeptember 2024

Taylor 5302553 Útmutató

31 Augusztus 2024

Taylor 3812 Útmutató

23 Augusztus 2024

Taylor 3842 Útmutató

23 Augusztus 2024

Taylor 1250BK Útmutató

23 Augusztus 2024

23 Augusztus 2024

23 Augusztus 2024

23 Augusztus 2024

23 Augusztus 2024

Útmutatók konyhai mérleg

Legújabb útmutatók konyhai mérleg

Listo BCL6 Útmutató

5 Január 2025

Primo SCK3 Útmutató

4 Január 2025

Scarlett SC-KS57P78 Útmutató

3 Január 2025

Scarlett SC-KS57P82 Útmutató

3 Január 2025

SilverCrest SNAW 1000 D2 Útmutató

1 Január 2025

Livoo DOM431 Útmutató

31 December 2025

Cardinal Detecto AP-6 Útmutató

29 December 2024

Salter 1064 WHDR Útmutató

26 December 2024

Salter 1074 Útmutató

26 December 2024

Smeg FS0104 Útmutató

24 December 2024