Használati útmutató Taylor 3710-21

Taylor konyhai mérleg 3710-21

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Taylor 3710-21 (2 oldal) a konyhai mérleg kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Mechanical Kitchen Scale
3710
®
Leading the Way in Accuracy
Instruction Manual
Instruction Manual
Instruction Manual
Instruction ManualInstruction Manual
Thank you for purchasing a Taylor® Kitchen Scale. Your Taylor® scale is an
example of superior design and craftsmanship. Please read this instruction
manual carefully before use. Keep these instructions handy for future
reference.
1. Place the scale base on a hard, level surface.
2. There may be pieces of cardboard and plastic fasteners between the
base and platform support bar to prevent damage during shipping. Do
not remove cardboard stabilizers until instructed to do so.
3. On the platform support bar on the top of the scale, there are 2 screws in
the outermost holes. Loosen and remove the screws. Set the screws aside.
Take care not to misplace the screws.
4. Place the bowl frame on the platform support bar. Line up two of the
crossbar screw holes with the screw holes on the support bar.
5. Place one of the screws through the top of one of the holes. Tighten the
screw with a Philips screwdriver. Repeat with the other screw hole.
6. Remove cardboard stabilizers
7. The scale may be disassembled for storage by removing the weighing tray
and loosening the screws and removing the crossbar.
1. Place the scale base on a hard, level surface. Place the weighing tray so
that it is stable on top of the base unit.
2. 0The pointer should indicate “ ” before objects to be weighed are placed
on the scale. To adjust the pointer to “ ”, use the adjustment dial located 0
on the top of the base unit.
3. Carry the scale by holding the base unit. Take care not to drop the tray. If
the scale is relocated, recalibration to “ ” may be required. To do so, 0
repeat steps 1 and 2.
Assembly Instructions
Calibration/General Weighing Operation
Taylor® warrants this product to be free from defects in material or
workmanship for one (1) year from date of original purchase for the original
purchaser. It does not cover damages or wear resulting from accident,
misuse, abuse, commercial use, or unauthorized adjustment and/or repair.
If service is required, do not return to retailer. Should this product require
service (or replacement at our option), please pack the item carefully and
return it prepaid, along with store receipt showing the date of purchase and a
note explaining reason for return to:
There are no expressed warranties except as listed above. This warranty gives
you specific legal rights, and you may have other rights which vary from state
to state.
For additional product information, or warranty information in Canada or
elsewhere outside the USA, please contact us through www.taylorusa.com.
© 2009 Taylor Precision Products and its affiliated companies, all rights
reserved. Taylor® and Leading the Way in Accuracy® are registered
trademarks of Taylor Precision Products and its affiliated companies. All rights
reserved.
Made to our exact specifications in China.
Not legal for trade.
www.taylorusa.com
1. The scale base is not dishwasher safe. Immersing the scale in water may
trap liquid between the lens and the body that cannot be effectively
dried-out. Damage will void warranty.
2. An occasional wiping with a soft cloth and mild soap will keep your Taylor®
scale clean and attractive. Do not use abrasive cleaners. Your Taylor®
scale does not require oiling or lubrication of any kind.
3. The weighing tray is top dishwasher safe.
4. Do not put either the base unit or the tray in a microwave.
5. Protect the scale from flames, heat, direct sunlight and high humidity.
6. Do not tamper with the scale's internal components. Doing so will
invalidate the warranty on this unit and may cause damage. The scale
contains no user-serviceable parts.
Care and Maintenance
One Year Limited Warranty
3710 9.09
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA

Termékspecifikációk

Márka: Taylor
Kategória: konyhai mérleg
Modell: 3710-21

Szüksége van segítségre?

Ha segítségre van szüksége Taylor 3710-21, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók konyhai mérleg Taylor

Taylor

Taylor 3719-49 Útmutató

9 Január 2025
Taylor

Taylor 3741 Útmutató

9 Január 2025
Taylor

Taylor 3880 Útmutató

9 Január 2025
Taylor

Taylor TE22OS Útmutató

28 December 2024
Taylor

Taylor 384521 Útmutató

10 Szeptember 2024
Taylor

Taylor 5302553 Útmutató

31 Augusztus 2024
Taylor

Taylor 3812 Útmutató

23 Augusztus 2024
Taylor

Taylor 3842 Útmutató

23 Augusztus 2024
Taylor

Taylor 1250BK Útmutató

23 Augusztus 2024
Taylor

Taylor 1053 Útmutató

23 Augusztus 2024

Útmutatók konyhai mérleg

Legújabb útmutatók konyhai mérleg

Tanita

Tanita KW-301 Útmutató

3 Április 2025
Beper

Beper BP.800 Útmutató

31 Március 2025
Moulinex

Moulinex Optiss BN50U Útmutató

30 Március 2025
Soehnle

Soehnle Page Profi 300 Útmutató

27 Március 2025
Nedis

Nedis KASC620BK Útmutató

17 Március 2025
ECG

ECG KV 125 Útmutató

16 Január 2025
Morphy Richards

Morphy Richards 46185 Útmutató

15 Január 2025
Jata

Jata 717 Útmutató

14 Január 2025
Beper

Beper 90.115R Útmutató

14 Január 2025
Heinner

Heinner HKS-5RSS Útmutató

14 Január 2025