Használati útmutató Swann SWNHD-865MSB

Swann Térfigyelő kamera SWNHD-865MSB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Swann SWNHD-865MSB (2 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
M865_885CAMVER1E | © Swann 2017
Helpdesk & Resources
Swann Communications warrants this product against defects in workmanship and material for a period of
one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred
to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when
shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or
the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman
or other person or any other costs associated with its use are the responsibility of the end user. This warranty
applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end
user or third party modifications to any component will render all warranties void. By law some countries do not
allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal
rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may cause undesired op-
eration.
Thermal-Sensing
Security Camera
Motion & Heat-Activated Bullet Camera for Network Video Recorders
EN INSTRUCTION MANUAL
Security Made Smarter
Security Made Smarter
Limited Warranty - Terms & Conditions5 FCC Verification6
Visit Swann Support Center at . You can register support.swann.com
your product for dedicated customer support, download guides, find
answers to commonly asked questions, and more.
Product Registration Customer Support
Product Manuals Frequently Asked Questions
Support Community
Introduction
Congratulations on the purchase of your Swann
Thermal-Sensing Camera.
• Enjoy day & night protection with the latest
thermal-sensing security & have a bird’s eye
view of your premises
• See what’s happening during the night with in-
frared cut filter & powerful LEDs
• State-of-the-art True Detect PIR motion sensor
is designed for security applications with the
ability to reliably detect people, cars, large pets
& other heat-generating large objects
• With more accurate motion detection you have
more reliable push notifications & activity-trig-
gered recording, eliminating false triggers due
to the wind, leaves falling, bugs, rain & more,
saving you hard drive space & playback time
Important instructions
1. Make sure the camera is fixed correctly and stable
if fastened in place.
2. Never place strain of any kind on the network ca-
ble connection. It’s designed to clip into the Ethernet
port, but it won’t support weight and can be broken.
3. Do not operate if wires and terminals are exposed.
Important Note: All jurisdictions have specific laws
and regulations relating to the use of cameras. Be-
fore using any camera for any purpose, it is the buy-
er’s responsibility to be aware of all applicable laws
and regulations that limit the use of cameras.
About this Manual: The content in this manual is for
information purposes only and is subject to change
without notice. While every effort is made to ensure
that this manual is accurate at the time of printing, no
liability is assumed for any errors occurred.
1. Take into consideration what you want to monitor
and where you’ll get the best view of it.
2. How you’re going to connect the camera to your
monitoring system; remember that cables and
connections should be kept out of the weather.
3. How to keep the camera out of harm’s way. It’s
recommended to mount your camera at an elevated
position.
4. Place your camera as close to the area of interest
as practicable. The best position is from about
13ft/4m above looking slightly down, keeping in mind
the details you are looking for.
5. Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach. Make sure your camera
has minimal sky in it as the light in daylight can make
the foreground of the image darker.
6. Think about the most likely way a potential offender
may approach your home, use your camera to give
you the best coverage of these areas.
7. The camera’s casing is resistant to different
weather conditions and tampering. It would take an
overwhelming event to damage the housing.
8. Even though the camera is weather and water-
resistant, prolonged exposure to adverse weather
conditions such as sunlight or excessive moisture,
may eventually damage the internal components of
the camera and adversely affect its performance.
9. Run cables inside a wall cavity or other protected
enclosure, and ensure that all wiring and connectors
are insulated and protected from moisture.
10. Don’t put your cable near live electrical wiring. AC
electricity generates radio “noise” which can interfere
with the signal from your camera.
1 Connecting the Camera2 Mounting the Camera3 Camera Location Tips4
To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the
camera then plug the other end of the cable into one of the camera inputs on the back of your NVR.
Please note: The power connector is provided as an alternative power option if required. Your NVR will
provide power over the Ethernet cable when connected and a separate power adapter is not required.
Power
Ethernet Cable
LAN
CAM7CAM7 CAM5CAM5
CAM8CAM8 CAM6CAM6
CAM3CAM3
CAM4CAM4
CAM1CAM1
CAM2CAM2WANWANAUDIO O UTAUDIO O UT VGAVG A
48V48V
The camera can be mounted onto a flat surface using the screws and wall plugs provided. The surface must
have sufficient strength to hold the camera.
→ Position the camera in the location you want to mount it, and mark the screw holes on the surface to
position the screws (a mounting template has been included). Then, using the appropriate screws for the
surface you’re fixing the camera to, secure the camera in place.
→ If you’re mounting to a wooden surface, then screw the camera directly to the surface.
→ If you’re mounting to a masonry surface (bricks, concrete or similar), then you’ll need to use wall plugs.
Aiming the camera
1. Loosen both screws (use an Allen key) to adjust the camera’s orientation.
This enables you to rotate the camera so no matter what direction it is facing,
your images will be the right way up. Tighten each screw to secure in place.
2. Loosen the screw to tilt the camera up or down. Tighten the screw to
secure in place.
3. To pan the camera left or right, loosen the screw and position accordingly.
Tighten the screw to secure in place.
3
2
1
1

Termékspecifikációk

Márka: Swann
Kategória: Térfigyelő kamera
Modell: SWNHD-865MSB

Szüksége van segítségre?

Ha segítségre van szüksége Swann SWNHD-865MSB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Térfigyelő kamera Swann

Swann

Swann SWNHD-866MSD Útmutató

3 Október 2024
Swann

Swann SW312-HMD-CA Útmutató

16 Szeptember 2024
Swann

Swann PRO-A851 Útmutató

15 Szeptember 2024
Swann

Swann PRO-760 Útmutató

10 Szeptember 2024
Swann

Swann SW231-WMX Útmutató

10 Szeptember 2024
Swann

Swann ADS-466 Útmutató

8 Szeptember 2024
Swann

Swann SWVID-PENBL4 Útmutató

2 Szeptember 2024
Swann

Swann Pro-535 Útmutató

31 Augusztus 2024
Swann

Swann PRO-743 Útmutató

27 Augusztus 2024
Swann

Swann PRO-843 Útmutató

27 Augusztus 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera

Hikvision

Hikvision DS-2CE10DF8T-FSLN Útmutató

6 Április 2025
Hikvision

Hikvision DS-2CE56C0T-IRPF Útmutató

5 Április 2025
Hikvision

Hikvision DS-2CD2141G1 Útmutató

5 Április 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Útmutató

15 Január 2025
Toshiba

Toshiba IKS-WR7412 Útmutató

14 Január 2025
Flir

Flir FC-610 O Útmutató

13 Január 2025
AVerMedia

AVerMedia FC1320-P Útmutató

13 Január 2025
Digitus

Digitus OptiMax DN-16037 Útmutató

13 Január 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Útmutató

13 Január 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Útmutató

13 Január 2025