Használati útmutató Swann PRO-754

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Swann PRO-754 (12 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
1
PRO-754
Pan, Tilt and Zoom Dome Camera
INSTRUCTION MANUAL
EN
1
Limited Warranty Terms & Conditions
Swann Communications warrants this product against defects in workmanship and material for a period of one
(1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred
to send the product to Swanns repair centres. The end user is responsible for all shipping costs incurred when
shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the
inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other
person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the
original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third
party modifications to any component or evidence of misuse or abuse of the device will render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local
laws, regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to major failure.
FCC Verification
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
These devices may not cause harmful interference, and
These devices must accept any interference received, including interference that may cause undesired
operation.
Important Note:
All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any camera for any
purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations that prohibit or limit the use
of cameras and to comply with the applicable laws and regulations.
WARNING
Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
Make sure product is fixed correctly and stable if fastened in place.
Do not operate if wires and terminals are exposed.
Before You Begin
2
Contents
Quick Reference
Power Supply
Before You Begin 1
Contents 2
Quick Reference 2
Power Supply 2
Introduction 3
Layout of the Camera 3
Layout of the OSD Controller 4
Notice about this Manual 4
Camera Installation
Choosing the Location 5
Attaching the Mount 6
Mounting the Camera 6
Connection Guide 7
DVR Configuration
Configuring the PTZ Settings 8
Changing the Cameras Command Address 8
Camera Operations 9
Advanced Feature: On-Screen Display 9
Troubleshooting 10
Helpdesk / Technical Support Details Rear Cover
Default PTZ Configuration
Command Address: 1
Protocol: Pelco-D
Baud Rate: 9600bps
RS485 Polarity: +A Red Wire
-B Black Wire
Be sure to use only the 15V power adapter that is supplied with the PRO-754. Basically,
it’s got a little extra juice to power the infrared LED arrays in the dome at the same
time as the camera.
Don’t use the 15V power supply for other cameras. Likewise, don’t use other cameras
power supplies with the PRO-754. Doing so may cause unintended damage to the
camera.

Termékspecifikációk

Márka: Swann
Kategória: Térfigyelő kamera
Modell: PRO-754

Szüksége van segítségre?

Ha segítségre van szüksége Swann PRO-754, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Térfigyelő kamera Swann

Swann

Swann SW312-HMD-CA Útmutató

16 Szeptember 2024
Swann

Swann PRO-A851 Útmutató

15 Szeptember 2024
Swann

Swann PRO-760 Útmutató

10 Szeptember 2024
Swann

Swann SW231-WMX Útmutató

10 Szeptember 2024
Swann

Swann ADS-466 Útmutató

8 Szeptember 2024
Swann

Swann SWVID-PENBL4 Útmutató

2 Szeptember 2024
Swann

Swann Pro-535 Útmutató

31 Augusztus 2024
Swann

Swann PRO-743 Útmutató

27 Augusztus 2024
Swann

Swann PRO-843 Útmutató

27 Augusztus 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera