Használati útmutató Supermicro SuperChassis SC846BE1C-R1K28B
Supermicro
Lemeztömb
SuperChassis SC846BE1C-R1K28B
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Supermicro SuperChassis SC846BE1C-R1K28B (93 oldal) a Lemeztömb kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/93
USER’S MANUAL
Revision 1.0
SC846X ChASSiS
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: April 30, 2015 mk
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
3
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the chassis. Installation and
maintenance should be performed by experienced technicians only.
This document lists compatible parts available when this document was published.
Refer to the Supermicor web site for updates on supported parts and congurations.
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing
a procedure.
Warning! Indicates important information given to prevent equipment/
property damage or personal injury.
Termékspecifikációk
| Márka: | Supermicro |
| Kategória: | Lemeztömb |
| Modell: | SuperChassis SC846BE1C-R1K28B |
Szüksége van segítségre?
Ha segítségre van szüksége Supermicro SuperChassis SC846BE1C-R1K28B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lemeztömb Supermicro
17 Augusztus 2024
14 Augusztus 2024
13 Augusztus 2024
13 Augusztus 2024
12 Augusztus 2024
Útmutatók Lemeztömb
- Lemeztömb Fujitsu
- Lemeztömb Sharkoon
- Lemeztömb HP
- Lemeztömb Rocstor
- Lemeztömb Dell
- Lemeztömb Netgear
- Lemeztömb Synology
- Lemeztömb Western Digital
- Lemeztömb HGST
- Lemeztömb D-Link
- Lemeztömb IDIS
- Lemeztömb Areca
- Lemeztömb QNAP
- Lemeztömb IStarUSA
- Lemeztömb Enhance
- Lemeztömb Icy Box
- Lemeztömb SilverStone
- Lemeztömb Buffalo
- Lemeztömb LaCie
- Lemeztömb Intel
- Lemeztömb Fantec
- Lemeztömb Seagate
- Lemeztömb IoSafe
- Lemeztömb AIC
- Lemeztömb Tandberg Data
- Lemeztömb Icy Dock
- Lemeztömb Sonnet
- Lemeztömb CRU
- Lemeztömb Vantec
- Lemeztömb Addonics
- Lemeztömb OWC
- Lemeztömb Raidsonic
- Lemeztömb Infortrend
- Lemeztömb G-Technology
- Lemeztömb Glyph
- Lemeztömb Promise Technology
Legújabb útmutatók Lemeztömb
30 December 2025
28 December 2024
11 Október 2024
30 Szeptember 2024
22 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
13 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024