Használati útmutató StarTech.com STUTPRXL

StarTech.com Vevő STUTPRXL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com STUTPRXL (2 oldal) a Vevő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/28/2011
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x VGA over Cat5 Remote Receiver
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• UTPE series video transmitter/splitter (i.e. ST124UTPE/ST128UTPE)
• VGA enabled display device (i.e. monitor, projector, etc.)
• Available AC electrical outlet
STUTPRXL / STUTPRXLGB / STUTPRXLEU
VGA Video Extender over Cat 5 Remote Receiver (UTPE Series)
Installation
Connecting the STUTPRXL Remote Receiver to the transmitter/
splitter:
Connect the Cat5 signal source cable running from the UTPE
series transmitter/splitter to the RJ45 connector at one end of the
Remote Receiver.
Connecting the STUTPRXL Remote Receiver to the VGA display/
monitor:
Connect a VGA male/male cable from the display device to the
VGA connector on the Remote Receiver.
Powering the Remote Receiver:
Connect the power adapter (provided) to the port marked DC
12V on the Remote Receiver. Connect the opposite end to an AC
electrical outlet or other suitable power source. The Power LED will
light up.
Adjusting image quality:
Once the necessary connections have been made, power on the
VGA display/monitor. On the bottom of the Remote Receiver, are
adjustment dials for EQ (sharpness) and GAIN (brightness). Using
a small Phillips or slot-head screwdriver, adjust the sharpness with
the dial marked EQ in a clockwise direction. Similarly, turn the
adjustment dial marked GAIN in a clockwise direction, to adjust
the brightness of the displayed image.
*actual product may vary from photos
Front View
Rear View
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Specications
Video Signal VGA (RGBHV)
External Connectors
1 x DE-15 VGA female
1 x RJ45 Ethernet female
1 x DC Power
LEDs 1 x Power
Compatible Cabling Cat5/5e
Supported Video
Resolutions
1920 x 1200 @ 50m / 150ft
1600 x 1200 @ 100m / 300ft
1280 x 1024 @ 180m / 550ft
1024 x 768 @ 200m / 620ft
800 x 600 @ 300m / 950ft
Enclosure Material Metal
Power Adapter 12V DC, 600 mA, center positive,
type M plug
Troubleshooting
The remote display is black, or indicates that there is “no signal”:
Check that the display is receiving power and that all cables are
connected securely.
The remote display does not display an image when the local
computer wakes up from Standby Mode:
Power the remote display OFF and ON again
The image on the remote display is distorted, or displays a
“signal error” or similar error message:
1. Adjust the local computer to a lower resolution and refresh rate
until the remote display shows an image.
2. Gradually increase the resolution and refresh rate on the local
computer until the remote display ceases to display an image.
3. Return the resolution and refresh rate on the local computer to
the highest resolution and refresh rate setting that displayed an
image on the remote display
4. Adjust the Signal Equalizer on the Remote Unit for best
performance
NOTE: If you are still unable to see an image at the remote location
after trying the above solutions, it is recommended that you verify
the Ethernet cable installation to the remote display before calling
technical support. This can be done using a standard cable tester - if
you do not have a cable tester, contact a local computer service or
wiring professional.

Termékspecifikációk

Márka: StarTech.com
Kategória: Vevő
Modell: STUTPRXL

Szüksége van segítségre?

Ha segítségre van szüksége StarTech.com STUTPRXL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő StarTech.com

StarTech.com

StarTech.com STUTPRXL Útmutató

19 Augusztus 2024
StarTech.com

StarTech.com ST124W Útmutató

19 Augusztus 2024
StarTech.com

StarTech.com ST128HDMI2 Útmutató

19 Augusztus 2024
StarTech.com

StarTech.com ST12MHDLNHR Útmutató

19 Augusztus 2024
StarTech.com

StarTech.com ST122UTPA Útmutató

18 Augusztus 2024
StarTech.com

StarTech.com ST123HDA Útmutató

18 Augusztus 2024
StarTech.com

StarTech.com ST12MHDLANUR Útmutató

17 Augusztus 2024
StarTech.com

StarTech.com ST128L Útmutató

16 Augusztus 2024
StarTech.com

StarTech.com ST121EXT Útmutató

16 Augusztus 2024
StarTech.com

StarTech.com ST12MHDLAN Útmutató

16 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025
Graupner

Graupner GR-8 Útmutató

30 Március 2025
MB Quart

MB Quart FA2-2000.1 Útmutató

29 Március 2025