Használati útmutató StarTech.com PEX10000SRI

StarTech.com hálózati kártya/adapter PEX10000SRI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com PEX10000SRI (2 oldal) a hálózati kártya/adapter kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 07/15/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/PEX10000SRI.
Package contents
• 1 x 10G SFP+ ber network card
• 1 x 10GBase-SR SFP+ transceiver module (preinstalled)
• 1 x low-prole bracket
• 1 x quick-start guide
System requirements
• PCI Express® enabled computer with an available PCI Express slot
(x8 or x16)
• Any of the following operating systems:
• Windows® 10 (32-bit and 64-bit)
• Windows 8.1 (32-bit and 64-bit)
• Windows 8 (32-bit and 64-bit)
• Windows 7 (32-bit and 64-bit)
• Windows Server® 2008 R2
• Windows Server 2012
• Linux® Kernel 2.6.24 and later
• Microsoft® Hyper-V®
• Phillips head screwdriver (optional)
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/PEX10000SRI.
PEX10000SRI
1-Port 10G SFP+ Fiber Optic Network Card - PCIe - Intel Chip - MM
Introduction
To experience reliable high-performance network connectivity over
multi-mode ber, you can use the PEX10000SRI to add a 10GBase-SR
port to your server or workstation. This SFP+ network card oers up
to 10Gbps of network speed and features the Intel® 82599 chipset.
The PEX10000SRI can be mounted in both low-prole and full-prole
computer systems.
Product diagram
SFP+ slot
Link or activity LED
Mounting bracket
(full-prole pictured)
PCIe p1-x8
connector
*actual product may vary from photos
Bracket screw
Bracket screw
Install the low-prole bracket
The PEX10000SRI can be mounted in both low-prole and
full-prole computer systems. The full-prole bracket comes
preinstalled, but you can install the low-prole bracket instead.
1. Remove the from the 10GBase-SR SFP+ transceiver module
SFP+ slot on the SFP+ network card.
2. Use a Phillips head screwdriver to remove the two bracket screws
from the PEX10000SRI.
3. Remove the full-prole bracket from the SFP+ network card.
4. Line up the low-prole bracket with the bracket holes on the back
of the SFP+ network card.
5. Insert the two bracket screws that you removed in step 2 and
tighten them into place.
6. Insert the into the 10GBase-SR SFP+ transceiver module SFP+
slot on the network card
Install the network card in a computer
Warning! PC components can be severely damaged by static
electricity. If an anti-static strap isn’t available, discharge any built-
up static electricity by touching a large, grounded metal surface for
several seconds.
1. Turn o your computer and any devices or peripherals that are
connected to it (for example, printers, external storage, and
so on).
10GBase-SR SFP+
transceiver module
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
2. Unplug the power cable from the back of your computer.
3. Disconnect any peripheral devices that are connected to your
computer.
4. Open your computer case. For more information about how to
properly do this, consult the documentation that came with
your computer system.
5. Locate an open PCI Express x8 slot and remove the
corresponding metal cover plate from the back of your
computer case. Consult the documentation that came with your
computer for details about how to do this safely.
This card works in PCIe slots of x8 or x16 lanes.
6. Gently insert the card into the open PCI Express slot and use a
computer case screw (not included) to fasten the bracket to the
back of the case.
7. Place the cover back onto your computer case.
Connect to a network
1. Connect a ber network cable to the 10GBase-SR SFP+
transceiver module on the SFP+ network card and to a
10GBase ber port on your network switch or device.
2. Reconnect the power cable to the back of your computer and
all of the disconnected peripheral devices.
3. Turn on your computer.
About the LED indicators
The PEX10000SRI features a green indicator next Link or activity LED
to the SFP+ slot.
LED behavior Signicance
LED is illuminated Card is connected to the network
LED is blinking Activity is occurring
Install the driver
1. If the Found New Hardware dialog box appears on your screen,
close the dialog box or click Cancel.
2. Navigate to www.StarTech.com/PEX10000SRI.
3. Click the tab.Support
4. Download the driver.
5. When the download is complete, extract the contents of the
compressed le that you downloaded.
6. Double-click the appropriate driver for the version of the OS that
you’re running and follow the on-screen instructions to complete
the installation.

Termékspecifikációk

Márka: StarTech.com
Kategória: hálózati kártya/adapter
Modell: PEX10000SRI

Szüksége van segítségre?

Ha segítségre van szüksége StarTech.com PEX10000SRI, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hálózati kártya/adapter StarTech.com

StarTech.com

StarTech.com 107B-USB-HDMI Útmutató

15 Január 2025
StarTech.com

StarTech.com USB32HDVGA Útmutató

15 Január 2025
StarTech.com

StarTech.com ST1000SPEXD4T Útmutató

10 Január 2025
StarTech.com

StarTech.com U1-USB-ISOLATOR Útmutató

30 December 2025
StarTech.com

StarTech.com AX54005A-USB-WIFI-6E Útmutató

30 December 2025
StarTech.com

StarTech.com O1210I-NETWORK-CARD Útmutató

29 December 2024
StarTech.com

StarTech.com CDP2DVI Útmutató

29 December 2024
StarTech.com

StarTech.com ST1000SPEXD2 Útmutató

29 December 2024
StarTech.com

StarTech.com OR41GI-NETWORK-CARD Útmutató

17 December 2024
StarTech.com

StarTech.com ST1000SPEX2T Útmutató

3 Október 2024

Útmutatók hálózati kártya/adapter

Legújabb útmutatók hálózati kártya/adapter

EtherWAN

EtherWAN EX41941F Útmutató

3 Április 2025
Vigitron

Vigitron MaxiiView Vi00023 Útmutató

3 Április 2025
AVPro Edge

AVPro Edge AC-MXNET-10G-TCVR Útmutató

2 Április 2025
EtherWAN

EtherWAN TG103H-0802 Útmutató

2 Április 2025
AVPro Edge

AVPro Edge MXNet AC-MXNET-10G-TCVR Útmutató

1 Április 2025
ScreenBeam

ScreenBeam ECB6250 Útmutató

30 Március 2025
Ubiquiti Networks

Ubiquiti Networks USW-Aggregation Útmutató

29 Március 2025
Vigitron

Vigitron Vi22601 Útmutató

15 Március 2025
Vigitron

Vigitron Vi22201 Útmutató

15 Március 2025
Martin Logan

Martin Logan WSK1D Útmutató

14 Január 2025