Használati útmutató Sparky M 1010 HD
Sparky
Haakse slijpmachines
M 1010 HD
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sparky M 1010 HD (130 oldal) a Haakse slijpmachines kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/130
www.sparky.eu
1706R01 142321V4© 2017 SPARKY
ANGLE GRINDER
Original instructions
MEULEUSE ANGULAIRE
Notice originale
УГЛОШЛИФОВАЛЬНАЯ МАШ
Оригинальная инструкция по э
WINKELSCHLEIFER
Originalbetriebsanleitung
Оригінальна інструкція з експл
КУТОШЛІФУВАЛЬНА МАШИН
SZLIFIERKA KĄTOWA
Oryginalna instrukcja obsługi
REBARBADORA ANGULAR
Manual original
SMERIGLIATRICE ANGOLARE
Istruzioni originali
ESMERILADORA ANGULAR
Instrucciones de uso originales
Оригинална инструкция за изп
ЪГЛОШЛИФОВЪЧНА МАШИ
BLACK PANTONE185
А
6
7
91
4 5 8
2.1 3.1
10 11
12
13
4
3.1
2.1
5
4
3.2
2.2
5
BLACK PANTONE185
1EN
Introduction
Your new SPARKY power tool will more than satisfy your expectations. It has been manufactured
under stringent SPARKY Quality Standards to meet superior performance criteria. You will nd your
new tool easy and safe to operate, and, with proper care, it will give you many years of dependable
service.
WARNING:
Carefully read through these Original Instructions before using your new SPARKY power tool.
Take special care to heed the Warnings. Your SPARKY power tool has many features that will
make your job faster and easier. Safety, performance, and dependability have been given top
priority in the development of this tool, making it easy to maintain and operate.
Do not dispose of electric tools together with household waste!
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.
ENVIRONMENTAL PROTECTION
The machine, accessories and packaging should be sorted for environmental-friendly
recycling.
The plastic components are labelled for categorised recycling.
UNPACKING
Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is
missing. If you nd anything wrong, do not operate the tool until the parts have been replaced or the
fault has been rectied. Failure to do so could result in serious personal injury.
ASSEMBLY
The angle grinder is packed fully assembled except for the wheel guard and the auxiliary handle.
Contents
Introduction ............................................................................................................................... 1
Technical specications ............................................................................................................ 3
General power tool safety warnings ..........................................................................................4
Angle grinder safety warnings ...................................................................................................5
Know your product .................................................................................................................A/8
Operation ...............................................................................................................................B/8
Maintenance ...........................................................................................................................10
Warranty .................................................................................................................................. 11
M 1010 HD● MB 1010 HD ● MB 1010PA HD ● M 1300 HD ● MB 1300 HD
MB 1300PA HD ● MB 1600C HD ● MB 1600CPA HD● Original instructions
Termékspecifikációk
| Márka: | Sparky |
| Kategória: | Haakse slijpmachines |
| Modell: | M 1010 HD |
Szüksége van segítségre?
Ha segítségre van szüksége Sparky M 1010 HD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Haakse slijpmachines Sparky
2 Július 2024
Útmutatók Haakse slijpmachines
- Haakse slijpmachines Milwaukee
- Haakse slijpmachines Parkside
- Haakse slijpmachines Bosch
- Haakse slijpmachines Makita
- Haakse slijpmachines Flex
- Haakse slijpmachines Black & Decker
- Haakse slijpmachines Kawasaki
- Haakse slijpmachines Metabo
- Haakse slijpmachines HiKOKI
- Haakse slijpmachines Ferm
- Haakse slijpmachines Stayer
Legújabb útmutatók Haakse slijpmachines
16 Október 2024
16 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
13 Október 2024
13 Október 2024
13 Október 2024
11 Október 2024
8 Október 2024