Használati útmutató Soundcraft Spirit Protracker

Soundcraft nincs kategorizálva Spirit Protracker

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Soundcraft Spirit Protracker (18 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/18

5 5

101

0 10

Page 1

Introduction

Thank you for buying a Tracker mixer, brought to you with pride by the team of Trevor, Martin, Gary, Ian, Martin, Peter,SPIRIT Pro SPIRIT

George, Colin, Mukesh, Andy and Simon. We hope you have as much fun as we did!

Owning a console brings you the expertise and support of one of the industrys leading manufacturers and the results of over 22 yearsSPIRIT

experience supporting some of the biggest names in the business.

Built to the highest standards using quality components, Tracker offers superbly clean sound for live recording direct-to-tape, simultaneousPro

recording and monitoring of live concerts, small scale PA or high quality overdub mixing in the smaller studio or bedroom.

ProTracker packs tremendous flexibility into a small unit and is designed to be as easy to use as possible, but some time spent NOW, looking

through this manual and getting to know your new mixer will give you lots of helpful tips and confidence, away from the pressures of an important

session. Dont be afraid to experiment to find out how each control affects the sound - this will only extend your creativity and help you to get the

best from your mixer.

Contents

Introduction 1

Safety Precautions 1

Connections 2

System Overview 3

Controls in Detail

Inputs 5

Master 7

Advanced Features 8

Initial Setting Up 9

Applications 10

Specifications 14

Glossary 15

System Block Diagram 16

SAFETY PRECAUTIONS

For your own safety and to avoid invalidation of the warranty please read this section carefully.

The Tracker mixer must only be connected to a mains supply in the range 100-240V AC, 50-60Hz and must be earthed.Pro

The wires in the mains lead are coloured in accordance with the following code:

Earth: Green and Yellow (Green/Yellow - US)

Neutral: Blue (White - US)

Live: Brown (Black - US)

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol.

The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N.

The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L.

Ensure that these colour codings are followed carefully in the event of the plug being changed.

The unit contains no user-serviceable parts. Refer all servicing to a qualified service engineer, through the appropriate Soundcraft dealer.

Page 2

Hot (+ve)

Cold (-ve)

Gnd/Screen

Signal

Gnd/Screen

Tip

Ring Sleeve

Unbalanced

Line Input

Unbalanced Mic

XLR

Line/Instrument Inputs

Insert Returns

Tape Sends

Balanced Mic Input

2TK Monitor Input

XLR

2. Hot(+ve)

3. Cold(-ve)

1. Screen

2. Hot(+ve)

Link 3

to 1

Left Signal

Right Signal

Ground

Headphones

Signal (+ve)

Gnd/Screen

Monitor, Aux Outputs

Insert Sends

Mix Outputs

XLR

1. Screen

3. Cold (-ve)

2. Hot (+ve)

XLR

JACK

RCA

PHONO

Connections

Protracker uses three types of audio connector - XLR, 3-pole jack and RCA phono. XLR and jack connectors may be used in balanced and unbalanced configurations as shown below: