Használati útmutató Sony GDM-90W01T

Sony Egyéb számítógépes tartozék GDM-90W01T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sony GDM-90W01T (91 oldal) a Egyéb számítógépes tartozék kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/91
3-858-581-14 (1)
ES
F
EN
D
I
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Istruzioni per l’uso
Color Graphic Display
J
取扱説明書
GDM-90W01T
(22.5” viewing image)
2
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your service representative
regarding this product.
Model No. Serial No.
WARNING
To prevent fire or shock hazard, do not expose the unit
to rain or moisture.
Dangerously high voltages are present inside the set.
Do not open the cabinet. Refer servicing to qualified
personnel only.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
INFORMATION
This product complies with Swedish National Council for
Metrology (MPR) standards issued in December 1990 (MPR ll) for
very low frequency (VLF) and extremely low frequency (ELF).
INFORMATION
Ce produit est conforme aux normes du Swedish National Council
for Metrology de décembre 1990 (MPR ll) en ce qui concerne les
fréquences très basses (VLF) et extrêmement basses (ELF).
Hinweis
Dieses Gerät erfüllt bezüglich tieffrequenter (very low frequency)
und tiefstfrequenter (extremely low frequency) Strahlung die
Vorschriften des „Swedish National Council for Metrology (MPR)“
vom Dezember 1990 (MPR ll).
INFORMACIÓN
Este producto cumple las normas del Consejo Nacional Sueco para
Metrología (MPR) emitidas en diciembre de 1990 (MPR ll) para
frecuencias muy bajas (VLF) y frecuencias extremadamente bajas
(ELF).
Dieses Gerät entspricht den folgenden europäischen EMV-
Vorschriften für Betrieb in Wohngebieten, gewerblichen
Gebieten und Leichtindustriegebieten.
EN55022/1994 Klasse B
EN50082-1/1992
EN60555-2/1987
Hinweise
• Aus ergonomischen Gründen wird empfohlen, die
Grundfarbe Blau nicht auf dunklem Untergrund zu
verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu
geringem Zeichenkontrast).
• Aus ergonomischen Gründen sollten nur Darstellungen auf
dunklem Hintergrund bei Vertikalfrequenzen ab
60 Hz (ohne Zeilensprung) benutzt werden.
• Die Konvergenz des Bildes kann sich auf Grund des
Magnetfeldes am Ort der Aufstellung aus der korrekten
Grundeinstellung verändern. Zur Korrektur empfiehlt es sich
deshalb, die Regler an der Frontseite für Konvergenz so
einzustellen, daß die getrennt sichtbaren Farblinien für Rot,
Grün und Blau bei z.B. der Darstellung eines Buchstabens zur
Deckung (Konvergenz) gelangen.
Siehe hierzu auch die Erklärungen zu Konvergenz.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 18×
AWG
Length Maximum 15 feet
Rating Minimum 7A, 125V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 18×
AWG
Longueur Maximum 15 pieds
Tension Minimum 7A, 125V
This monitor is Energy Star Compliant
when used with a computer equipped
with VESA Dispaly Power Management
Signaling (DPMS). As an International
ENERGY STAR Partner, we have
determined that this product meets the
International NERGY E STAR Program
for energy efficiency.
This monitor complies with the TCO
1992 guidelines for power saving when
used with a computer equipped with
VESA Dislay Power Management
Signaling (DPMS).
この装置は、情報処理装置等電波障害自主規制協議会
（VCCI）基準に基づく第二種情報技術装置です。この
装置は、家庭環境で使用することを目的としています
が、この装置がラジオやテレビジョン受信機に近接して
使用されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをしてください。
3
EN
F
D
ES
I
J
Table of Contents
Precautions ............................................................................ 3
Getting Started ...................................................................... 4
Selecting the Input Signal.................................................... 4
Functions of Controls........................................................... 5
Selecting the OSD Language .............................................. 7
Changing the OSD Position ................................................ 7
Operating the OSD ............................................................... 7
Adjustments (Normal mode).............................................. 8
Adjustments (Expert mode).............................................. 12
Control Lock Function ....................................................... 15
Degaussing the Screen ....................................................... 15
Plug & Play.......................................................................... 16
Damper Wire ....................................................................... 16
Power Saving Function...................................................... 16
Input Signal Warning Function........................................ 17
Use of the Tilt-Swivel ......................................................... 17
Specifications ...................................................................... 17
Troubleshooting ................................................................. 18
Installation
• Prevent internal heat build-up by allowing adequate air
circulation. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
• Do not install the unit near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
• Do not place the unit near equipment which generates
magnetism, such as a converter or high voltage power
lines.
Maintenance
• Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.
• Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ballpoint pen or a
screwdriver. This type of contact may result in a scratched
picture tube.
Transportation
When you transport this monitor for repairing or shipping,
use the original carton box and packing materials.
Warning on power
connection
• Use a proper power cord for your local power supply.
Examples of plug shapes
• Before disconnecting the power cord, wait for at least 30
seconds after turning off the power to allow the static
electricity on the CRT display surface to discharge.
• After the power has been turned on, the CRT is
demagnetized for approximately five seconds. This
generates a strong magnetic field around the bezel, which
may affect the data stored on magnetic tapes or disks near
the bezel. Place such magnetic recording equipment and
tapes/disks away from this unit.
The socket-outlet should be installed near the
equipment and be easily accessible.
Precautions
for 100 to 120 V AC for 200 to 240 V AC

Termékspecifikációk

Márka: Sony
Kategória: Egyéb számítógépes tartozék
Modell: GDM-90W01T

Szüksége van segítségre?

Ha segítségre van szüksége Sony GDM-90W01T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Egyéb számítógépes tartozék Sony

Sony

Sony PCGA-AC71 Útmutató

16 Január 2025
Sony

Sony PCGA-CG10 Útmutató

8 Október 2024
Sony

Sony PCGA-PRGR1 Útmutató

3 Október 2024
Sony

Sony PCWA-AR300 Útmutató

27 Szeptember 2024
Sony

Sony PCGA-MM532SD Útmutató

21 Szeptember 2024
Sony

Sony VGP-DDRW4 Útmutató

18 Szeptember 2024
Sony

Sony PCGA-AC5 Útmutató

18 Szeptember 2024
Sony

Sony VGP-PRT1 Útmutató

13 Szeptember 2024
Sony

Sony PCWA-C800S Útmutató

9 Szeptember 2024
Sony

Sony VGP-PRFE1 Útmutató

3 Szeptember 2024

Útmutatók Egyéb számítógépes tartozék

Legújabb útmutatók Egyéb számítógépes tartozék

Avocent

Avocent AVCTBND1 Útmutató

12 Január 2025
Gembird

Gembird NBS-DR1-01 Útmutató

8 Január 2025
Biltema

Biltema 84-8781 Útmutató

3 Január 2025
Icy Box

Icy Box IB-DK2252AC Útmutató

30 December 2025
Icy Box

Icy Box IB-NH300 Útmutató

30 December 2025
Icy Box

Icy Box IB-553SSK Útmutató

30 December 2025
Iiyama

Iiyama OMK5-1 Útmutató

30 December 2025
StarTech.com

StarTech.com DK30A2DHUUE Útmutató

29 December 2024
StarTech.com

StarTech.com CDP2HVGUASPD Útmutató

29 December 2024
Middle Atlantic

Middle Atlantic LACE-40-OP Útmutató

27 December 2024