Használati útmutató Sonos Sonance

Sonos hangszóró Sonance

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sonos Sonance (6 oldal) a hangszóró kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
S O N O S I N - C E I L I N G
BY S O N A N C E
INSTALLATION MAN UAL
1
Introduction
Thank you for purchasing SONOS IN-CEILING by SONANCE
Speakers. When properly installed your new speakers will give
you years of entertainment pleasure.
Box Contents
(2) SONOS In-Ceiling Speakers
(2) Paintable Grilles
(2) Mounting Cut-out Templates
Speaker Placement
Stereo Speaker Placement (2-Channel System)
• Place the left and right speakers anywhere from 6 - 10 feet
(1.8m – 3m) apart, with the main listening position as close to
midway between the speakers as possible.
• In most cases pivoting the woofer and/or midrange/tweeter
assembly of each speaker directly towards the main listening
position will help maximize the stereo soundstage.
Use the left and right speaker placement in Figures 2 and 3, on
the left side of image, as a guide.
NOTE: CONSULT LOCAL BUILDING CODES BEFORE RUNNING SPEAKER WIRES THROUGH CEILINGS.
Figure 1: Distributed Audio Speaker Spacing
Coverage Area Coverage Area
Speaker
Spacing
Distributed Audio System Speaker Spacing
Standing Listener Seated Listener
8 Foot Ceiling 5’7” (1.7m) apart 9’5” (2.9m) apart
10 Foot Ceiling 9’7” (3m) apart 13’5” (4.1m) apart
12 Foot Ceiling 13’7” (4.2m) apart 17’5” (5.3m) apart
14 Foot Ceiling 17’7” (5.4m) apart 21’5” (6.6m) apart
Figure 2: 5.1 Channel Home Theater Speaker Placement
Left, Center
& Right
Speakers
Left & Right
Surround
Speakers
6’-10’
(1.8-3m)
apart
2’-6’
(0.6-1.8m)
apart
Home Theater Speaker Placement
Surround Speakers — 5.1-Channel System
• Locate the left and right surround speakers 2 – 6 feet (0.6
– 1.8m) behind the listening position. The speakers should be 6
– 10 feet (1.8 – 3m) apart (see Figure 2).
Surround Speakers — 7.1-Channel System
• Left & Right Surround Speakers: Place the left and right
surround speakers directly to the sides of the listening position,
6 –10 feet (1.8 – 3m) apart (see Figure 3).
Surround Back Speakers
• Place the surround back speakers 2 – 6 feet (0.6 – 1.8m) behind
the listening position. The surround back speakers should be
closer together than the left and right surround speakers, 3 – 6
feet (0.9 – 1.8m) apart.
Figure 3: 7.1 Channel Home Theater Speaker Placement
Left, Center
& Right
Speakers
Left & Right
Surround
Speakers
3’-6’
(0.9-1.8m)
apart
2’-6’
(0.6-1.8m)
apart
TV
TV
Before Installation
1. Determine the location for the speaker (see Speaker
Placement above).
2. Perform an obstruction survey using a stud finder to be certain
that there are no studs, conduit, pipes,heating,ducts, pocket
doors or air returns in the ceiling cavity that will interfere with
the speaker. If you are unsure about obstructions, drill a small
hole in the center of the outline and insert a coat hanger wire
into the hole to feel around for possible obstructions.
3. Cut the mounting hole using a keyhole or drywall saw, and run
the speaker wires from the mounting hole to the amplifier
location.
Installation
SONOS In-Ceiling by Sonance features integral Roto-Lock®
mounting system for quick mounting directly into
existing ceilings.
1. Strip 1/4 – 1/2” (6 – 12mm) of insulation from each speaker
lead. Twist the strands or tin the exposed wire with solder to
ensure that there are no stray strands.
NOTE: STRAY STRANDS THAT TOUCH EACH OTHER CAN CAUSE A SHORT-CIRCUIT THAT CAN DAMAGE
THE AMPLIFIER.
2. The speaker’s terminals are spring-loaded. Push the top of
each terminal down to open the connector and insert the
exposed wires into the holes in the spring terminals.
The speaker’s positive spring terminal is labeled with a red dot;
the negative spring terminal is labeled with a black dot. Double
check that you connected amplifier “+” to speaker “+” and
amplifier “–” to speaker “–”.
3. Make sure all the Roto-Lock toggle feet are retracted so that
they are tucked within the mounting hole’s border. Insert the
speaker into the hole in the ceiling (see Figure 5). The Roto-
Lock system can accommodate a ceiling material thickness of
1-1/4” (32mm) with the toggle foot cap removed the system can
accommodate a ceiling material thickness of 1-7/8” (48mm).
4. When installing into double drywall or other thicker ceiling
materials, you may need to remove part of the two-piece
toggle feet. Use a small screwdriver to gently release the two
locking levers (see Figure 4).
5. Tighten the screws on the front of the speaker bae. The Roto-
Lock toggle feet will automatically rotate into position and
begin clamping the speaker (see Figure 6). When you notice
resistance on the screws the speaker has been
clamped successfully.
6. The micro-trim grille is held in place by several small, powerful
magnets on the speaker frame. Place the grille against the
speaker and the magnets will hold it firmly in place. When
properly installed, the grille trim should make contact with the
wall all the way around the speaker.
Figure 4: Removing the Caps from the Roto-Lock Toggle Feet
Remove
Cap
Locking Levers
Figure 5: Inserting the Speaker into the Mounting Hole
Roto-Lock Clamps
(retracted)
Figure 6: Tightening the Roto-Lock Screws
Roto-Lock Screws
IMPORTANT: ALWAYS USE LOW TORQUE SETTINGS; NEVER OVER-TIGHTEN.
NOTE: ADJUST THE TENSION OF THE ROTO-LOCK CLAMPS SO THAT THE SPEAKER FRAME IS FLAT. THIS
WILL HELP ENSURE THAT THE GRILLE CONTACTS THE CEILING ALL THE WAY AROUND THE SPEAKER
FOR A PROPER FIT.
2
Speaker Adjustments
Pivoting Woofer and Midrange/Tweeter
SONOS In-Ceiling speakers have a pivoting woofer and a
pivoting midrange/tweeter assembly. If you’re using the speakers
in stereo or as the front left/center/right speakers in a home
theater, pivot the drivers directly towards the listening area.
If you’re using the speakers as surround channel speakers in a
home theater, pivot the drivers towards a wall or window, away
from the listeners.
To pivot the drivers apply light pressure to the ring around the
outside edge of the woofer, midrange and tweeter cone, as
shown in Figure 7. Take care not to touch or apply pressure to the
cone itself.
Figure 7: Pivoting Tweeter Left, Pivoting Woofer Right
Unlocking Sonos Audio
Enhancements
Sonos In-Ceiling by Sonance speakers include exclusive audio
enhancements when used with a Sonos Amp. Use the free Sonos
app to unlock them.

Termékspecifikációk

Márka: Sonos
Kategória: hangszóró
Modell: Sonance

Szüksége van segítségre?

Ha segítségre van szüksége Sonos Sonance, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Sonos

Sonos

Sonos Sonance Útmutató

2 Augusztus 2024
Sonos

Sonos Era 100 Útmutató

29 Július 2024
Sonos

Sonos Wallmount Útmutató

22 Július 2024
Sonos

Sonos Play:1 Útmutató

8 Július 2024
Sonos

Sonos Roam SL Útmutató

4 Július 2024
Sonos

Sonos Playbase Útmutató

4 Július 2024
Sonos

Sonos One SL Útmutató

1 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025