Használati útmutató Sonic Alert SBD375sseu
Sonic Alert
Riasztó csörög
SBD375sseu
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sonic Alert SBD375sseu (3 oldal) a Riasztó csörög kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/3
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SONIC ALERT’S 1 YEAR LIMITED WARRANTY
The Sonic Boom Dual Alarm Clock Model SBD375ss is
warranted against manufacturing defects in materials and
workmanship for one (1) year from the date of purchase.
Within this period Sonic Alert will repair or replace at our option
the SBD375ss without charge for parts and labor. Simply
send the SBD375ss (postpaid) and a copy of your sales slip as
proof of purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
www.SonicAlert.com 1- - -800 566 3210 V/TTY
Sonic Boom Dual Alarm Clock
with Bed Shaker
Model SBD375sseu
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before
connecting to mains make sure that the requirements specified on the apparatus corresponds to the
available power supply i.e. USA: AC 110V / 60Hz EUROPE: AC 230V / 50 Hz.
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
www.SonicAlert.com 1- - -800 566 3210 V/TTY
The Lightning flash and
arrowhead within the
triangle is a warning sign
alerting you of dangerous
voltage inside the
product.
CAUTION: TO
REDUCE THE RISK OF
ELECTRICAL
SCHOCK, DO NOT
REMOVE THE COVER
(OR BACK) FROM THE
PRODUCT. NO USER
SERVICABLE PARTS
INSIDE. REFER
SERVICING TO YOUR
SONIC ALERT
DEALER.
The exclamation mark
within the triangle is a
warning sign alerting you
of important instructions
accompanying the
product.
!
DUAL ALARM CLOCK WITH ADJUSTABLE TONE, VOLUME, AND
VIBRATOR
MODEL SBD375ss
OPERATION INSTRUCTIONS
IMPORTANT- Please read these instructions carefully before use and retain for future
reference.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before
connecting to mains make sure that the requirements specified on the apparatus corresponds to the
available power supply i.e. USA: AC 110V / 60Hz EUROPE: AC 230V / 50 Hz.
Features shown on diagrams above:
1) Dual Alarm Setting 7) Slow Min/Hour Button 13) Alarm 1 (AL1) Indicator
Switch 8) Snooze Button 14) Alarm 2 (AL2) Indicator
2) Dimmer Switch 9) Time Set Switch 15) Vibrator/Bed Shaker Input
3) Clock Display 10) Tone Control Wheel 16) AC Power Input
4) PM Indicator (12 hr. only) 11) Function Switch 17) Backup Battery Compartment
5) Alarm SET/OFF Switch 12) Volume Control Wheel
6) Fast Min/Hour Button
GENERAL DATA
Power: Consumption: USA: AC 110V / 60Hz EUROPE: AC 230V / 50 Hz.
UL listed transformer (Underwriters Laboratories)
Setting the corre ct time-
1) Depress “TIME SET” button (9)
2)
As you depress the “TIME” button (9) at the same time depressing the “FAST” (6) or the “SLOW
(7) minute/hour button to advance clock display until you have desired time.
3) Lighted dot (4) located in upper left corner o
f clock display indicates time is PM, no light indicates
time is AM.
Setting the alarm time-
1) To set alarm AL1 slide “DUAL ALARM SETTING SWITCH” (1) to AL1 position.
2)
Depress “ALARM SET/OFF” (5) button at the same time depressing “FAST” (6) or the “SLOW”
(7) minute/hour button until you reach desired alarm setting.
NOTE: when setting the alarm time if you advance more than 24 hours the display (3) will begin to
flash and alarm will sound. To stop flashing, move “FUNCTION SWITCH” (11) up then back to
OFF position. When alarm sounds display (3) will also flash.
3) Make sure alarm time is correctly set for AM or PM (4).
4)
Once alarm AL1 has been set, slide the “DUAL SETTING SWITCH” (1) to the AL2 position
Follow the same steps that were taken when setting alarm AL1.
5)
Once both AL1 and AL2 have been set, slide the “DUAL SETTING SWITCH” to the middle
position AL1+AL2 for both alarms.
6)
You will see two dots on the right side of the LED display; AL1 (13) and AL2 (14) to show alarm
have been enabled. Lighted dots indicate which alarm is set.
Alarm -
1)
To enable the alarm function, slide the “FUNCTION SWITCH” (11) up to the position that you
desire to wake to, you can choose “VIB” for bed shaker, “BUZZ” for sound, and “VIB/BUZZ” fo
both. NOTE: whichever function you choose to wake to, will be the same function for both alarms.
Snooze Operation-
1) “SNOOZE” button (8) – press after alarm has gone off. The alarm will re-
set for an additional 9
minutes for extra sleep. You may repeat up to 54 minutes.
2) When using “SNOOZE” (8) if alarm AL1 uses snooze, it will not affect alarm AL2.
Shutting Off Alarm -
Alarm can be shut off temporary for the day or permanently shut off.
1)
When alarm AL1 goes off, press the “ALARM SET/OFF” (5) button to turn off for the day
2) Once both alarms go off and
the “ALARM SET/OFF” (5) button has been pressed, alarms will shu
off for the day and come back on the next day at the same time if alarm settings have not changed.
3)
To shut the alarm off permanently, slide the “FUNCTION SWITCH” (11) down to the OFF
positi
on. Alarm will not come on until “FUNCTION SWITCH” (11) is set to “VIB/BUZZ”, “VIB”
or “BUZZ” position.
Volume Control-
1) To adjust volume, rotate wheel located on the lower right bottom corner of the clock (12).
Tone Control-
1) To adjust “TONE CONTROL” (10)
turn the wheel on the top right corner of the clock to the
desired tone sound.
Bed Shaker / Vibrator-
1) Attach the bed shaker jack to the back of clock at “VIBRATOR INPUT” (15).
2) To turn on vibrator slide “FUNCTION SWITCH” (11) to “VIB” or “VIB/BUZZ” positio n.
3) Place vibrator between mattress and box spring.
Battery Backup-
1) To use battery back up, install a 9-
volt alkaline battery in back of clock located under the
“BACKUP BATTERY COMPARTMENT COVER” (17). Battery not included. NOTE: the LED
display will not sh
ow during power failure, but the clock will still be running and keeping proper
time until the power comes back.AC_9V Power Input-
1) Attach the “AC POWER INPUT” (16) to the back of AC-
9V IN next to “VIBRATOR INPUT”
(15); it is the smaller input of the two.
Clock Format Switch -
Located on the back of the clock this switch is a 3 position switch to set the correct time format for you
country. The format is necessary for the clock to keep the correct time otherwise the clock may run too
fast or too slow.
NOT E:
IMPORTANT: do not confuse “AC POWER INPUT” (16) with the “VIBRATOR INPUT” (15).
Termékspecifikációk
| Márka: | Sonic Alert |
| Kategória: | Riasztó csörög |
| Modell: | SBD375sseu |
Szüksége van segítségre?
Ha segítségre van szüksége Sonic Alert SBD375sseu, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Riasztó csörög Sonic Alert
1 Szeptember 2024
31 Augusztus 2024
Útmutatók Riasztó csörög
- Riasztó csörög Oregon Scientific
- Riasztó csörög Hyundai
- Riasztó csörög Auriol
- Riasztó csörög HQ
- Riasztó csörög Geemarc
- Riasztó csörög Vimar
- Riasztó csörög Hama
- Riasztó csörög Sencor
- Riasztó csörög Techno Line
- Riasztó csörög Dahua Technology
- Riasztó csörög Velleman
- Riasztó csörög TFA
- Riasztó csörög Monacor
- Riasztó csörög Blaupunkt
- Riasztó csörög Olympia
- Riasztó csörög Delta Dore
- Riasztó csörög La Crosse Technology
- Riasztó csörög Konig
- Riasztó csörög Homematic IP
- Riasztó csörög Ascot
- Riasztó csörög Smartwares
- Riasztó csörög Amplicom
- Riasztó csörög Cresta
- Riasztó csörög Grothe
- Riasztó csörög Valcom
- Riasztó csörög Nikkei
- Riasztó csörög Xavax
- Riasztó csörög Electia
- Riasztó csörög Pentatech
- Riasztó csörög X4 Life
- Riasztó csörög Gewiss
Legújabb útmutatók Riasztó csörög
31 December 2025
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
9 December 2024
9 December 2024