Használati útmutató Snooper RC100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Snooper RC100 (2 oldal) a Különféle kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
RC100 Reversing Camera Wiring Instructions
Supplied in the box should be the following parts.
1 x Rc100 Reversing Camera
1 x 5 Metre S-Video Camera Cable
1 x RC100 Camera Bracket
1 x S7000 Connection Cable ( use only if connecting to a Snooper S7000)
1 x RC100 Power And Video Camera Connection Cable
As Pictured below this is the connection cable for the reversing camera to the extension lead, power
and video output.
To connect this cable to a vehicle please follow the instructions below.
1. Connect the red wire to a triggered live connection e.g. reversing light or reversing switch.
2. Connect the Green wire to a permanent live connection e.g. in the fuse box or another
source.
3. Connect the black wire to an earth point or a negative wire on the vehicle.
4. Connect the Yellow video cable to the input of the device to accept the connection.
Once you have done this then connect the camera directly to the lead to confirm the connection is
correct and functions properly.
Once this has been done then you can disconnect the camera run the 5 metre lead through the
vehicle and confirm the camper position before final connection.
If you have any further queries about the connection of this product please call Performance
Products Technical Support Team on 01928 579579 and select option 3 on the automated Service.

Termékspecifikációk

Márka: Snooper
Kategória: Különféle
Modell: RC100

Szüksége van segítségre?

Ha segítségre van szüksége Snooper RC100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Különféle Snooper

Útmutatók Különféle

Legújabb útmutatók Különféle