Használati útmutató Snap Circuits Pro SC-500

Snap Circuits Játékok Pro SC-500

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Snap Circuits Pro SC-500 (76 oldal) a Játékok kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/76
Copyright © 2012 by ELENCO®All rights reserved. No part of this book shall be reproduced by 753098
any means; electronic, photocopying, or otherwise without written permission from the publisher.
REV-H Revised 2012
Patent #‘s: 7,144,255, 7,273,377, & other patents pending
Project 242
-1-
Table of Contents
Basic Troubleshooting 1
Parts List 2
MORE
About Your Snap Circuits®Parts 3
MORE
DO’s and DON’Ts of Building Circuits 4
MORE
Advanced Troubleshooting 5
Project Listings 6, 7
Projects 102 - 305 8 - 73
Other Fun Elenco®Products 74
1. Most circuit problems are due to incorrect assembly.
Always double-check that your circuit exactly
matches the drawing for it.
2. Be sure that parts with positive/negative markings are
positioned as per the drawing.
3. Be sure that all connections are securely snapped.
4. Try replacing the batteries.
5. If the motor spins but does not balance the fan, check
the black plastic piece with three prongs on the motor
shaft. Be sure that it is at the top of the shaft.
Elenco®is not responsible for parts damaged due to
incorrect wiring.
Basic Troubleshooting
Note: If you suspect you have damaged parts, you can
follow the Advanced Troubleshooting procedure on page 5
to determine which ones need replacing.
Review of How To Use It (See page 3 of the Projects 1-101 manual for more details.)
The Snap Circuits®kit uses building blocks with snaps
to build the dierent electrical and electronic circuits in
the projects. These blocks are in different colors and
have numbers on them so that you can easily identify
them. The circuit you will build is shown in color and
with numbers, identifying the blocks that you will use
and snap together to form a circuit.
Next to each part in every circuit drawing is a small
number in black. This tells you which level the
component is placed at. Place all parts on level 1 first,
then all of the parts on level 2, then all of the parts on
level 3, etc.
A large clear plastic base grid is included with this kit
to help keep the circuit block together. The base has
rows labeled A-G and columns labeled 1-10.
Install two (2) “AA” batteries (not included) in the
battery holder (B1). The 2.5V and 6V bulbs come
packaged separate from their sockets. Install the 2.5V
bulb in the L1 lamp socket, and the 6V bulb in the L2
lamp socket.
Place the fan on the motor (M1) whenever that part is
used, unless the project you are building says not to
use it.
Some circuits use the red and black jumper wires to
make unusual connections. Just clip them to the metal
snaps or as indicated.
Note: While building the projects, be careful not to
accidentally make a direct connection across the
battery holder (a “short circuit”), as this may damage
and/or quickly drain the batteries.
WARNING: SHOCK HAZARD -
Never connect Snap Circuits®to
the electrical outlets in your home
in any way!
WARNING FOR ALL PROJECTS WITH A SYMBOL
Moving parts. Do not touch the motor or fan during operation. Do not lean
over the motor. Do not launch the fan at people, animals, or objects. Eye
protection is recommended.
!!
WARNING: CHOKING HAZARD -
Small parts.
Not for children under 3 years.
!
Batteries:
• Use only 1.5V AA type, alkaline batteries
(not included).
• Insert batteries with correct polarity.
• Non-rechargeable batteries should not
be recharged. Rechargeable batteries
should only be charged under adult
supervision, and should not be
recharged while in the product.
• Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium)
batteries.
• Do not mix old and new batteries.
• Remove batteries when they are used up.
• Do not short circuit the battery terminals.
• Never throw batteries in a fire or attempt
to open its outer casing.
• Batteries are harmful if swallowed, so
keep away from small children.
• Do not connect batteries or battery
holders in parallel.
!WARNING: Always check your wiring before
turning on a circuit. Never leave a circuit
unattended while the batteries are installed. Never
connect additional batteries or any other power
sources to your circuits. Discard any cracked or
broken parts.
Adult Supervision: Because children’s abilities
vary so much, even with age groups, adults should
exercise discretion as to which experiments are
suitable and safe (the instructions should enable
supervising adults to establish the experiment’s
suitability for the child). Make sure your child reads
and follows all of the relevant instructions and
safety procedures, and keeps them at hand for
reference.
This product is intended for use by adults and
children who have attained sufficient maturity to
read and follow directions and warnings.
Never modify your parts, as doing so may disable
important safety features in them, and could put
your child at risk of injury.
!
-2-
Qty. ID Qty. IDName Symbol Part # Name Symbol Part #
r31-Snap Wire 6SC01 r110 6SCC3μF Capacitor
r32-Snap Wire 6SC02 r1100 6SCC4μF Capacitor
r13-Snap Wire 6SC03 r1470 6SCC5μF Capacitor
r14-Snap Wire 6SC04 r11k Resistor 6SCR2Ω
r17-Snap Wire 6SC07 r15.1k Resistor 6SCR3Ω
r1Battery Holder - uses
2 1.5V type AA (not
Included)
6SCB1 r110k Resistor 6SCR4Ω
r1Antenna Coil 6SCA1 r1100k Resistor 6SCR5Ω
r1Green Light Emitting
Diode (LED) 6SCD2 r1High Frequency
Integrated Circuit 6SCU5
r16V Lamp 6SCL2 r1PNP Transistor 6SCQ1
r1Microphone 6SCX1 r1NPN Transistor 6SCQ2
r1Power Amplifier
Integrated Circuit 6SCU4 r1Adjustable Resistor 6SCRV
r10.02 6SCC1μF Capacitor r1Variable Capacitor 6SCCV
r10.1μF Capacitor 6SCC2 You may order additional / replacement parts at our
website: www.snapcircuits.net
D2
A1
B1
7
4
3
2
1
L2
X1
U4
C1
C2
U5
R5
R4
R3
R2
C5
C4
C3
Q1
Q2
RV
CV
Note: There are additional part lists in your other project manuals.
Important: If any parts are missing or damaged, DO NOT RETURN TO RETAILER. Call toll-free (800) 533-2441 or e-mail us at:
help@elenco.com. Customer Service • 150 Carpenter Ave. • Wheeling, IL 60090 U.S.A.
Parts List (Colors and styles may vary) Symbols and Numbers

Termékspecifikációk

Márka: Snap Circuits
Kategória: Játékok
Modell: Pro SC-500

Szüksége van segítségre?

Ha segítségre van szüksége Snap Circuits Pro SC-500, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Játékok Snap Circuits

Snap Circuits

Snap Circuits Snaptricity SCBE-75 Útmutató

8 Augusztus 2024
Snap Circuits

Snap Circuits Beginner SCB-20 Útmutató

7 Augusztus 2024
Snap Circuits

Snap Circuits Pro SC-500 Útmutató

7 Augusztus 2024
Snap Circuits

Snap Circuits Arcade SCA-200 Útmutató

4 Augusztus 2024
Snap Circuits

Snap Circuits Basic Electricity SCP-10 Útmutató

4 Augusztus 2024

Útmutatók Játékok

Legújabb útmutatók Játékok

Mega Bloks

Mega Bloks 371 Útmutató

5 Április 2025
Rayline

Rayline Syma S107C Útmutató

5 Április 2025
Plusbricks

Plusbricks Flessenautomaat Supermarkt set 025 Útmutató

5 Április 2025
Yuneec

Yuneec E-Go Útmutató

5 Április 2025
Rayline

Rayline XBM-22 Útmutató

5 Április 2025
Clics

Clics Steamship Útmutató

5 Április 2025
Lego

Lego 80006 - 2 Útmutató

4 Április 2025
Lego

Lego Castle - Prison Carriage Rescue 7949 Útmutató

4 Április 2025
Vtech

Vtech KidiPet touch - Filly World Útmutató

4 Április 2025
Lego

Lego City 30221 v29 Fire Car Útmutató

4 Április 2025