Használati útmutató Smart-AVI SPS-4000

Smart-AVI Vevő SPS-4000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Smart-AVI SPS-4000 (2 oldal) a Vevő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
4K60 HDMI
Presentation Switcher with
4 Inputs and 2 Outputs
EXPERIENCE SEAMLESS
CONTROL WITH
OUR 4-PORT SINGLE HEAD
HDMI PRESENTATION SWITCHER,
OFFERING VIRTUALLY ZERO
VIDEO DELAY DURING CHANNEL
SWITCHING AND UHD 4K@60
VIDEO RESOLUTION
Quick Start Guide
VIDEO
Host Interface (4) HDMI 19-pin (female
User Console
Interface (2) HDMI 19-pin (female)
CONTROL
Front Panel Buttons (SELECT audio/video source)
RS232 Via Control @ 115200 bps
Web GUI Via LAN
OTHER
Power External 100-240 VAC/12VDC3A @
24W
Dimensions 12.57” W x 1.76” H x 6.69” D
Weight 4.2 lbs
Approvals UL, CE. ROHS Complaint
Operating Temp. +32 to +104°F (0 to +40°C)
Storage Temp. -4 to 140°F (-20 to +60°C)
Humidity 5 to 90% (No Condensation)
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
888.994.7427, 702.800.0005
2917 E Alexander Rd.
North Las Vegas, NV 89030
SmartAVI.com
TECHNICAL SPECIFICATION
SPS-4000
WHAT’S IN THE BOX
PART NO. DESCRIPTIONQ-TY
SPS-4000 1
4K60 HDMI Presentation
Switcher with 4 Inputs and
2 Outputs
Power Supply 1 PS12VDC3A
Quick Start Guide 1
FRONT PANEL
Res (resolution) – Cycles between 3 resolutions.
1. 3840x2160@60
2. 3840x2160@30
3. 1920x1080@60
SYSTEM CONTROL
There are three ways to control the SM-UHS-4S:
Keyboard HotKeys, RS-232 Serial Commands, and
Front Panel Buttons.
The settings for the serial connection are as follows:
Baud rate: 115200; Data Bits: 8; Parity: None;
Stop Bits: 1;
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use a HDMI cable to connect the HDMI output port from each computer to the corresponding HDMI IN ports of the unit.
3. Connect two monitors to the HDMI OUT console ports of the unit using a HDMI cable.
4. Power on the SPS-4000 by connecting a 12VDC power supply to power connector.
5. Optional: Connect a CatX cable from the LAN port on the SPS-4000 to a local network for control.
6. Turn on all the computers.
HARDWARE INSTALLATION
COMMAND RS232
Switch KWM //[#] <CR>m
Switch Audio // [#]<CR>a
Switch USB 2.0 // <CR>u
Switch KM // <CR>c
SW Reset // <CR>r
Mouse Roam ON // <CR>ks
Mouse Roam OFF // <CR>km
Full Screen // [1-4] y
PIP // [1-4][1-4]p
Quad //q
Set Resolution // [1-3] s
HDMI IN
HDMI OUT
RS232
RS-23 2 HDMI IN-1HDMI IN-2
HDMI IN-3
HDMI IN-4
HDMI OUT-1
LAN 12V DC
HDMI OUT-2
SPS-4000

Termékspecifikációk

Márka: Smart-AVI
Kategória: Vevő
Modell: SPS-4000

Szüksége van segítségre?

Ha segítségre van szüksége Smart-AVI SPS-4000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vevő Smart-AVI

Smart-AVI

Smart-AVI SPS-4000 Útmutató

12 Szeptember 2024
Smart-AVI

Smart-AVI HDS-4P Útmutató

29 Augusztus 2024
Smart-AVI

Smart-AVI SMA-D300 Útmutató

24 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő