Használati útmutató Shure VP89M

Shure mikrofon VP89M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Shure VP89M (24 oldal) a mikrofon kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/24

www.shure.com

27A15530 (Rev. 1) Printed in U.S.A.

N108

Wired Microphones

VP89L

VP89M

VP89S

VP89

Modular Shotgun Microphone

Microphone canon modulaire

Modulares Richtrohrmikrofon

Micrófono de cañón modular

Microfono shotgun modulare

Модульный линейный микрофон

モジュールショットガンマイクロホン

Modular Shotgun 마이크

模块化短枪式话筒

6 “ (15 cm)

General Description

The VP89 is a professional shotgun microphone for use in critical A/V media

production applications. Designed with interchangeable long, medium and

short capsules, the VP89 models provide scalable, superior off-axis rejection

for focus and flexibility in a wide variety of on-site locations.

Variations

The VP89 is available with long, medium, and short capsules in three model

variations: , , and .VP89L VP89M VP89S

The VP89 microphone has a tighter acceptance angle (is more directional)

when used with longer capsules, as shown in the graphic below.

Features

• Premier production microphone crafted with Shure quality, ruggedness, and

reliability

• Highly directional, uniform polar pattern optimized for distant pickup

• Modular design allows optimal performance in a wide variety of production

settings

• Designed for extremely low susceptibility to radiated and conducted hum,

GSM, and radio frequency interference (RFI)

• Superior common mode rejection

• Low self-noise and high output level

• Class A, discrete preamplifier provides transparent, extremely fast

transient response with no crossover distortion and minimal harmonic and

intermodulation distortion

• Selectable low-frequency response

• Lightweight, compact design accommodates prolonged operation,

minimizing operator fatigue attributed to many shotgun microphones

• Aircraft-grade aluminum alloy construction resists wear and abuse

• Operates over a wide range of temperatures and humidity

Changing Capsules

1. Turn off phantom power supplied to the microphone.

2. Unscrew the capsule from the preamplifier. Store the unused capsule with

its protective cap (included with the purchase of additional capsules).

3. Thread the replacement capsule to the preamp. Do not overtighten.

Note: Before each use, ensure the capsule is tightly secured to the preamp to

prevent signal loss during operation.

Wind Protection

Use the supplied windscreen to reduce wind-noise. For increased protection,

Shure offers two premium Rycote® wind protection accessories:

• Attenuates up to 25 dB of wind-noiseSoftie Windshield:

• Attenuates up to 38 dB of wind-noise while Suspension Windshield Kit:

preserving critical high frequencies; included Lyre suspension mounts

provide up to 25 dB of isolation

Suspension Mounts

Shure offers four Rycote® Softie Lyre Mounts to reduce handling noise and

low-frequency vibrations up to 15 dB:

• Secures to a standard camera shoe; for VP89S and InVision Video:

VP89M

• Fits into a standard camera clamp; for Camera Clamp Adapter (CCA):

VP89S, VP89M

• Adjustable handheld mount; for VP89S, VP89MPistol Grip:

• Secures to a boom pole; for VP89LBoom Adapter:

Note: All Softie Lyre Mounts (except InVision Video) are equipped with 3/8”

and 5/8” female threaded adapters for additional mounting options.

Double-Barrel Adapter

The Shure A89U adapter routes the preamp and cable connection beneath the

capsule, shortening the length of the microphone by up to 6” (150 mm). Use

the adapter to make a highly directional microphone in a compact form-factor.

XLR Connector Gasket

This microphone is supplied with a small corrugated rubber ring in the XLR

connector to absorb the mechanical slack between the microphone and cable.

Many high-end cables are made with a rubber shoulder on the XLR-F for the

same purpose. When connecting this microphone to a cable with a rubber

shoulder XLR-F connector, remove the corrugated rubber ring from the micro-

phone to ensure a proper fit.

Load Impedance

Maximum SPL capability, output clipping level, and dynamic range vary with

the input load impedance of the preamplifier to which the microphone is con-

nected. Shure recommends a minimum input load impedance of 1000 Ohms.

Most modern microphone preamplifiers meet this requirement. Higher imped-

ance results in better performance for these specifications.

Selecting Low-Frequency Response

A two-position switch on the preamplifier adjusts the low-frequency response.

Use the low-frequency filter to reduce room noise or proximity effect.

Normal response: Provides the most natural sound in most applications.

Low-frequency rolloff: Provides a 12 dB-per-octave rolloff below the

specified frequency for each model (see product specifications). Reduces

floor rumble and low-frequency room noise from heating and air conditioning

systems.

Compatibility

The VP89 is designed for forward and backward compatibility with Shure

SM89 shotgun microphones. Capsules and preamplifiers can interchange

seamlessly between the two models.

Power Requirements

This microphone requires phantom power and performs best with a 48 V DC

supply (IEC-61938), but it can operate with supplies as low as 11 V DC. Most

modern mixers provide phantom power and require the use of a mi-balanced

crophone cable: XLR-to-XLR or XLR-to-TRS.

Note: Information in this guide is subject to change without notice. For addi-

tional information about this product, please visit www.shure.com.

Rycote Custom Accessories

Shure offers custom Rycote

® suspension mounting and wind-protection solu-

tions designed for Shure VP shotgun microphones.

XLR-F

rubber

shoulder

corrugated

rubber ring

MICROPHONE

Termékspecifikációk

Márka:	Shure
Kategória:	mikrofon
Modell:	VP89M

Szüksége van segítségre?

Ha segítségre van szüksége Shure VP89M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók mikrofon Shure

Shure SBC210LM Útmutató

11 Január 2025

Shure VP89M Útmutató

30 December 2025

Shure KSM11 Útmutató

30 December 2025

Shure MoveMic Útmutató

30 December 2025

Shure MXA901-R Útmutató

3 Szeptember 2024

Shure SBC-DC-903 Útmutató

1 Szeptember 2024

Shure AXT910 Útmutató

31 Augusztus 2024

Shure SBC10-904 Útmutató

17 Augusztus 2024

Shure TH53 Útmutató

17 Augusztus 2024

Shure KSM8 Útmutató

16 Augusztus 2024

Útmutatók mikrofon

Legújabb útmutatók mikrofon

Røde NT1 Signature Series Útmutató

10 Április 2025

Genesis Radium 400 G2 Útmutató

9 Április 2025

Ambient TinyMike ATM216 Útmutató

9 Április 2025

Ambient Sound Fish ASF-1 MKII Útmutató

9 Április 2025

Ambient ASF-G Útmutató

9 Április 2025

Ambient Soundfish 2 MkII Útmutató

9 Április 2025

Ambient UMP III Útmutató

9 Április 2025

Comica VP3 Útmutató

2 Április 2025

Atlas Sound MWHHM Útmutató

2 Április 2025

Synco G2A1 Útmutató

2 Április 2025