Használati útmutató Shure UA864A

Shure mikrofon UA864A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Shure UA864A (10 oldal) a mikrofon kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
1/10
UA864 -- Wall-Mounted Active Directional
Antenna
General Description
The UA864 antenna provides active directional RF coverage in an easy-to-install, low-profile enclosure that can be
mounted on walls, ceilings, or metal surfaces with improved reception. The paintable, neutral white housing allows
the antenna to blend into corporate or classroom settings. The 4-position selectable gain switch provides attenua-
tion and boost settings to match the antenna to the environment. UHF variants provide wideband RF coverage.
Features
Low-profile design
Wall or ceiling mounting options
Wideband performance (UHF models only)
Four-position gain switch
Metal surface mounting capability
LED indicators for gain settings
Neutral white, paintable housing
Positioning Antennas for Diversity Reception
The UA864 is a polarized antenna and must be oriented correctly to optimize reception for each transmitter type.
The gain switch indicates the antenna's orientation. Position the antennas using the following guidelines:
Note: The antenna's inner construction may differ for each model variation.
Handheld and Bodypack Transmitters (vertical)
Shure Incorporated
2/10
Boundary Microphones (horizontal)
Mixed Transmitter Types (vertical and horizontal)
Antenna Placement
Use the following guidelines when mounting antennas:
Antennas and receivers must cover the same frequency range.
Mount antennas four feet apart for optimal diversity.at least
Position antennas so there is nothing obstructing a line of sight to the transmitter (including the audience).
Find More Information Online
For more information, visit http://www.shure.com
Installation
Mounting on a Wall or Ceiling
The mounting plate installs directly to a wall, ceiling, or a standard junction box.
Shure Incorporated
3/10
Required Equipment
#8 or #6 screws
Flat washers
Lock washers
Drill
Screwdriver
Installation Steps
1. Align the mounting plate:
Junction box mounting: Align the mounting plate with the junction box so that at least two screws can be
used.
Wall mounting: Use the mounting plate as a template to mark the location for the holes on the mounting sur-
face. Drill the holes accordingly.
2. Secure the mounting plate to the surface with the washers as shown (CAUTION: Do not over-tighten screws).
3. If running RF cable from inside the wall, guide it through the opening in the mounting plate and connect the ca-
ble to the antenna output.
4. Position the antenna mounting posts over the keyhole slots in the mounting plate and slide it into the locked
position.
Mounting to a wall or ceiling
Mounting to an electrical junction box

Termékspecifikációk

Márka: Shure
Kategória: mikrofon
Modell: UA864A

Szüksége van segítségre?

Ha segítségre van szüksége Shure UA864A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mikrofon Shure

Shure

Shure SBC210LM Útmutató

11 Január 2025
Shure

Shure VP89M Útmutató

30 December 2025
Shure

Shure KSM11 Útmutató

30 December 2025
Shure

Shure MoveMic Útmutató

30 December 2025
Shure

Shure MXA901-R Útmutató

3 Szeptember 2024
Shure

Shure SBC-DC-903 Útmutató

1 Szeptember 2024
Shure

Shure AXT910 Útmutató

31 Augusztus 2024
Shure

Shure SBC10-904 Útmutató

17 Augusztus 2024
Shure

Shure TH53 Útmutató

17 Augusztus 2024
Shure

Shure KSM8 Útmutató

16 Augusztus 2024

Útmutatók mikrofon

Legújabb útmutatók mikrofon