Használati útmutató Shop-Vac 5989500

Shop-Vac porszívó 5989500

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Shop-Vac 5989500 (12 oldal) a porszívó kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
User manual
Please review before operating vac.
Manual del usuario
Por favor lea esta manual antes de usar la aspiradora.
Series
SS11, SS14, SS16
Wet/Dry Vacuum
Household and Workshop Use
Series
SS11, SS14, SS16
Aspiradora para aspiración de residuos
Líquidos/Sólidos
Para Uso Doméstico y Comercial
ATTENTION!
Read all safety rules carefully
before attempting to operate.
Retain for future reference.
¡ATENCIÓN!
Lea cuidadosamente todas
las normas de seguridad
antes de utilizar la aspira-
dora. Conserve esta man-
ual para consultas futuras.
¡PELIGRO!
Nunca opere esta unidad ante
la presencia de materiales o
vapores inflamables dado que
los artefactos eléctricos pro-
ducen arcos o chispas que
pueden causar un incendio o
una explosión.
¡NO DEJE LA ASPI-
RADORA FUNCIO-
NANDO SIN VIGI-
LANCIA!
DANGER!
Never operate this unit when
flammable materials or vapors
are present because electri-
cal devices produce arcs or
sparks that can cause a fire
or explosion.
NEVER OPERATE
UNATTENDED!
SHOP-VAC CORPORATION
2323 Reach Road, P.O. Box 3307
Williamsport, PA 17701-0307
(570) 326-3557
www.shopvac.com
SHOP-VAC CANADA
1770 Appleby Line
Burlington, Ontario L7L 5P8
(905) 335-9730
www.shopvac.ca
Shop Vac-México, S.A. de C.V.
Av. Mariano Otero #5095, Local 1 PB
Col. La Calma
Zapopan, Jalisco C.P. 45070
MÉXICO
52 (33) 3188 6388
Patents Issued and Pending.
Brevets dé livrés et en instance.
Patentes registradas y en trámite.
© 2013 Shop-Vac Corporation. All Rights Reserved.
© Shop-Vac Corporation, 2013. Tous droits réservés.
© 2013 Shop-Vac Corporation. Todos los derechos reservados. 87549-04
Manuel d’utilisation
Veuillez lire avant d’utiliser l’aspirateur.
Series
SS11, SS14, SS16
Aspirateur pour Déchets Secs et Humides
Pour Utilisation Domestique ou dans les Entrepôts
ATTENTION!
Lisez attentivement les in-
structions sur la sécurité
avant d’utiliser cet appareil.
Conservez cette Notice pour
vous y reporter ultérieurement.
DANGER!
N’utilisez jamais cet aspira-
teur en présence de vapeurs
ou de matières inflammables.
Les appa-reils électriques
produisent des arcs ou des
étincelles qui peuvent causer
un incendie ou une explosion.
NE JAMAIS FAIRE
FONCTIONNER SANS
SURVEILLANCE!
BRAND/MARQUE/MARCA
in sketches B and C may be used
to connect this plug to a 2-pole
receptacle as shown in sketch B
if a properly grounded outlet is not
available. The temporary adaptor
should be used only until a properly
grounded outlet can be (sketch A)
installed by a qualified electrician.
The green colored rigid ear, lug or
the like extending from the adaptor
must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be
held in place by a metal screw.
IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY THE CANADIAN
ELECTRICAL CODE. Make sure that the appliance is connected to an outlet having the same
configuration as the plug. No adapter should be used with this appliance.
This appliance must be grounded. If it should malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This appli-
ance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING – IMPROPER CONNECTION OF THE EQUIP-
MENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE PERSON
IF YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS PROPERLY
GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE APPLIANCE
– IF IT WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED
BY A QUALIFIED ELECTRICIAN.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks
like the plug illustrated in . A temporary adaptor that looks like the adaptor illustrated sketch A
GROUNDING INSTRUCTIONS
UNPACKING AND SET-UP
1. Pull lid latches in an outward motion, remove tank cover and any accessories that may have
been shipped in the tank.
2. Attach caster system following the instructions and illustrations in this manual.
3. Attach side tank handles following the instructions and illustrations in this manual.
4. Before replacing tank cover, please refer to Dry Pick Up or Wet Pick Up Operation in this
manual to ensure you have the proper filters installed for your cleaning operation.
5. Replace tank cover, and apply pressure with thumb to each latch until it snaps tightly in
place. Make sure all lid latches are clamped securely.
When using the appliance at a distance where an extension cord becomes necessary, a 3-conductor
grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.
Use the table below to determine A.W.G. wire size required. To determine ampere rating of your vacuum,
refer to nameplate located on rear of motor cover. Before using appliance, inspect power cord for loose
or exposed wires and damaged insulation. Make any needed repairs or replacements before using
your appliance. Use only three-wire outdoor extension cords which have three-prong grounding-type
plugs and three-pole receptacles which accept the extension cord’s plug. When vacuuming liquids, be
sure the extension cord connection does not come in contact with the liquid.
NOTE: STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF THE AIR IS
LOW. THIS IS ONLY TEMPORARY AND DOES NOT AFFECT THE USE OF THE APPLIANCE. TO REDUCE THE
FREQUENCY OF STATIC SHOCKS IN YOUR HOME, THE BEST REMEDY IS TO ADD MOISTURE TO THE AIR
WITH A CONSOLE OR INSTALLED HUMIDIFIER.
EXTENSION CORDS
When using an electrical appliance, basic precautions should always be followed, including the
following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before
servicing. Connect to a properly grounded outlet only. See Grounding Instructions.
2. Do not expose to rain – store indoors.
3. Do not allow to be used as a toy. Close attention is necessary when used by or near chil-
dren.
4. Use only as described in this manual. Use only Manufacturer’s recommended attachments.
5. Do not use with damaged cord or plug. If appliance is not working as it should, has been
dropped, damaged, left outdoors or dropped into water, contact Shop-Vac Corporation for
assistance.
6. Do Not: pull or carry by cord, use cord as a handle, close a door on cord or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated sur-
faces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug; not the cord.
8. Do not handle plug or appliance with wet hands.
9. Do not put any object into openings. Do not use with any openings blocked; keep free of dust,
lint, hair and anything that may reduce air flow.
10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving
parts.
11. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot
ashes.
12. Do not use without dust bag and/or filters in place.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where
they may be present.
16. Do not use your cleaner as a sprayer of flammable liquids such as oil base paints, lacquers,
household cleaners, etc.
17. Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such as
asbestos, arsenic, barium, beryllium, lead, pesticides or other health endangering materials.
Specially designed units are available for these purposes.
18. Do not pick up soot, cement, plaster or drywall dust without cartridge filter and collection
filter bag in place. These are very fine particles that may pass through the foam and affect the
performance of the motor or be exhausted back into the air. Additional collection filter bags are
available.
19. Do not leave the cord lying on the floor once you have finished the cleaning job. It can become
a tripping hazard.
20. Use special care when emptying heavily loaded tanks.
21. To avoid spontaneous combustion, empty tank after each use.
22. The operation of a utility vac can result in foreign objects being blown into eyes, which can
result in eye damage. Always wear safety goggles when operating vacuum.
23. STAY ALERT. Watch what you are doing and use common sense. Do not use vacuum cleaner
when you are tired, distracted or under the influence of drugs, alcohol or medication causing
diminished control.
24. Do use this vacuum cleaner to vacuum lead paint debris because this mayWARNING! NOT
disperse fine lead particles into the air. This vacuum cleaner is not intended for use under EPA
Regulation 40 CFR Part 745 for lead paint material cleanup.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING – DO NOT LEAVE VACUUM UNATTENDED WHEN IT IS PLUGGED IN AND/OR OPERATING. UNPLUG UNIT WHEN NOT IN USE.
Volts Total length of cord in feet
120V
Ampere Rating
More Not More
Than Than
0 - 6
6 - 10
10 - 12
12 - 16
25 50 100 150
AWG
18
18
16
14
16
16
16
12
16
14
14
14
12
12
Not ommendedrec
6. Insert machine hose end into inlet of tank. Twist
slightly to tighten the connection (Figure 1).
7. Attach the extension wands to the accessory end
of the hose. Twist slightly to tighten the connection
(Figure 1).
8. Attach one of the cleaning accessories (depending on your cleaning requirements) to the
extension wands. Twist slightly to tighten the connection (Figure 1).
9. Plug the cord into the wall outlet. Your cleaner is ready for use.
I = ON, O =OFF
NOTE: MANY MORE USEFUL TOOLS ARE AVAILABLE AT YOUR LOCAL DEALER OR SHOP-VAC®
WEBSITE.
1
With Wheel Dolly
You will find two casters (b), two large rear wheels (c), (e)one axle tool rack (d), and two cap
nuts (f). If your vacuum is 16 U.S. gallons (60.5 liters) or larger you will also find two screws,
two metal flat washers and two square nuts with your wet/dry vacuum. Assemble as follows:
1. Make sure the cord is disconnected from the receptacle then remove the tank cover.
2. If your unit is 4 U.S. gallon (15.1 liter) to 14 U.S. gallon (53 liter), assemble as follows:
a. Turn tank upside down so the bottom is facing up.
b. Continue on to step 4 below.
3. If your unit is 16 U.S. gallon (60.5 liter) or above, assemble as follows:
a. With the tank upright and back facing you, insert square nut into one of the two slots
located in back of dolly (Figure 11).
b. Place metal flat washer over stem of screw.
c. Tilt the tank forward slightly and locate the hole provided in the underside of the
dolly directly below the slot containing the square nut (Figure 12).
d. Place the screw, containing the flat washer, into the hole and turn clockwise until
end of screw is connected to square nut. If you have difficulty getting the screw to
19
20
18
WARNING – ALWAYS DISCONNECT THE PLUG FROM THE
WALL OUTLET BEFORE REMOVING THE TANK COVER.
When using the reusable dry filter to pick up dust and dry
material, you must install foam sleeve and reusable dry filter
to ensure proper filtration. If the vacuum has been used
to pick up liquids, the foam sleeve must be cleaned and
(Not standard with all models)
INSTALLING FOAM SLEEVE AND REUSABLE
DRY FILTER
Not all units are equipped with the same caster system. Follow the instructions, which
apply to your specific unit.
With Caster Feet
1. With cord disconnected from receptacle and tank
cover removed, turn tank upside down so that the
bottom is facing up.
2. With a pair of scissors, trim the enclosed template
to fit your size tank. Sizes will be 11”, 14” or 16”
diameters.
3. Once template is cut out, place on bottom of tank.
Align inlet arrow on template with center of inlet on
tank .(Figure 2)
4. If caster feet are attached together, separate by
removing webbing.
5. Take caster foot marked with the letter A and align
arrow on foot with arrow on template (Figure 3)
also marked with the letter A .(Figure 4)
6. Place groove of foot over rim of tank and push until
the caster foot is tight against bottom of tank .(Figure 5)
7. Secure feet with screw and washer when provided .(Figure 6)
8. Repeat steps 4-7 with remaining feet.
9. If plastic flat washers are included in hardware package, place one flat washer over stem
of each caster. Flat washers are not required with all units.NOTE: 11
10. Insert casters into feet by placing stem of caster into holes provided. Apply pressure and
twisting motion until casters snap into place (Figure 7). 11
11. Return tank to upright position.
CASTER SYSTEM ASSEMBLY
TOOL HOLDER
(Not standard with all models)
1. With rear of unit facing you, take tool holder and position it with tabs facing rear of unit
(Figure 18).
2. Place "J" shaped tabs into the slots on cord wraps (Figure 19).
3. Press down until tabs snap into place.
4. Press down on center of tool holder until tab latches on bottom of lid (Figure 20).
A
Arrow
3
B
BA
A
Template
Bottom of Tank
2
DRY PICK UP
Tank Bottom
5
A
4
7
6
INSTALLING THE CARRIAGE HANDLE
(Not standard with all models)
Attach carriage handle to tank by inserting bolt through the center hole of handle and tank,
secure with nut provided. Attach side handles with screws provided. Be sure to spread ends of
carriage handle when assembling to prevent damage to tank.
1
2
4
3
5 Item Description
1 Metal tank handle
2 Side tank handle
3 #10 x 3/4” Screw hex head
4 Bolt 1/4 - 20 x 1/2”
5 1/4 - 20 Hex nut
SIDE TANK HANDLE ASSEMBLY
(Not standard with all models)
Attach side handles to tank with screws provided (Figure 21).
21
With Caster Dolly
You will find four casters with your wet/dry vacuum. If your vacuum is 16 U.S. gallon (60.5 (a)
liter) or larger, you will also find two screws, two metal flat washers and two square nuts. As-
semble as follows:
1. Make sure the cord is disconnected from the receptacle then remove the tank cover.
2. If your unit is 4 U.S. gallon (15.1 liter) to 14 U.S. gallon (53 liter), assemble as follows:
a. Turn tank upside down so the bottom is facing up.
b. Insert casters into bottom of dolly by placing stem of caster into holes provided. Apply
pressure and twisting motion until casters snap into place (Figure 8).
c. Return tank to upright position.
3. If your unit is 16 U.S. gallon (60.5 liter) or above, assemble as follows:
a. With the tank upright and back facing you, insert square nut into one of the two slots
located in back of dolly (Figure 9).
b. Place metal flat washer over stem of screw.
c. Tilt the tank forward slightly and locate the hole provided in the underside of the dolly
directly below the slot containing the square nut (Figure 10).
d. Place the screw, containing the flat washer, into the hole and turn clockwise until end of
screw is connected to square nut. If you have difficulty getting the screw to connect to
the square nut, push downward on the square nut with the eraser end of a pencil while
turning the screw.
e. Finish tightening the screw using 7/16” socket, wrench or nut driver.
f. Repeat steps a to e with the second slot in dolly.
16
15
14
13
17
18
19
e
c
b
d
a
12
a
8910
11
connect to the square nut, push downward on the square nut with the eraser end of a
pencil while
e. Finish tightening the screw using 7/16” socket, wrench or nut driver.
f. Repeat steps a to e with the second slot in dolly.
g. Turn tank upside down so bottom is facing up. Continue on to set 4 below.
4. Place axle upright on a hard surface and hammer on one cap nut Place one (Figure 13).
wheel on axle and slide down to cap nut Be sure flat side of wheel hub is (Figure 14).
facing outward.
5. Slide axle through holes provided in tool rack (Figure 15).
6. Slide remaining wheel onto axle and hammer on second cap nut (Figure 16).
7. Install tool rack assembly onto dolly (already installed on tank) by placing large slot in
tool rack over rim on back of dolly (Figure 17). Push tool rack onto dolly until the bottom
of tool rack is flush with bottom of dolly. NOTE: It is normal for tool rack to fit tightly onto
dolly.
8. Secure with four screws provided (Figure 18).
9. If plastic flat washers are included in hardware package, place one flat washer over stem
of each caster. Flat washers are not required with all units.NOTE:
10. Insert casters into front of dolly by placing stem of casters into holes provided. Apply pres-
sure and twisting motion until casters snap into place (Figure 19).
11. Return tank to upright position.
22 23

Termékspecifikációk

Márka: Shop-Vac
Kategória: porszívó
Modell: 5989500

Szüksége van segítségre?

Ha segítségre van szüksége Shop-Vac 5989500, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók porszívó Shop-Vac

Shop-Vac

Shop-Vac SSP16 Útmutató

14 Augusztus 2024
Shop-Vac

Shop-Vac K250-C Útmutató

13 Augusztus 2024
Shop-Vac

Shop-Vac 92LSQ650 Útmutató

13 Augusztus 2024
Shop-Vac

Shop-Vac ESSSQ550 Útmutató

12 Augusztus 2024
Shop-Vac

Shop-Vac 9626510 Útmutató

11 Augusztus 2024
Shop-Vac

Shop-Vac 5985000 Útmutató

10 Augusztus 2024
Shop-Vac

Shop-Vac 92MSQ650 Útmutató

10 Augusztus 2024
Shop-Vac

Shop-Vac 5989500 Útmutató

9 Augusztus 2024
Shop-Vac

Shop-Vac 85S200 Útmutató

8 Augusztus 2024
Shop-Vac

Shop-Vac 5985200 Útmutató

7 Augusztus 2024

Útmutatók porszívó

Legújabb útmutatók porszívó

AEG-Electrolux

AEG-Electrolux AVQ 2220 Útmutató

10 Április 2025
Electrolux

Electrolux z 3330 ultra silencer Útmutató

10 Április 2025
Shark

Shark NR96 SERIES Útmutató

10 Április 2025
Neato

Neato XV-11 All-Floor Robotic Vacuum Útmutató

10 Április 2025
Dirt Devil

Dirt Devil REBEL72 - DD7070 Útmutató

10 Április 2025
Electrolux

Electrolux zp 3520 clario Útmutató

9 Április 2025
Miele

Miele medicair s 600 serie Útmutató

9 Április 2025
Bort

Bort BSS-1800N-ECO Útmutató

9 Április 2025
Dibea

Dibea UV-808 Útmutató

9 Április 2025
Bestron

Bestron ABG100AMP - AMIGO Útmutató

9 Április 2025