Használati útmutató Shelly 1PM

Shelly kapcsoló 1PM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Shelly 1PM (4 oldal) a kapcsoló kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
INITIAL INCLUSION
Before installing/mounting the Device ensure that the grid is
powered off (turned down breakers). Connect the Relay to
the power grid and install it in the console behind the switch/
power socket following the scheme that suites the desired
purpose:
1. Connecting to the power grid with power supply 110-240V
AC - g. 1
2. Connecting to the power grid with power supply 24-60V
DC - g. 2
For more information about the Bridge, please visit:
http://shelly-api-docs.shelly.cloud/#shelly-family-overview
or contact us at: developers@shelly.cloud
You may choose if you want to use Shelly with the Shelly
Cloud mobile application and Shelly Cloud service. You can
also familiarize yourself with the instructions for Manage-
ment and Control through the embedded Web interface.
CONTROL YOUR HOME WITH YOUR VOICE
All Shelly devices are compatible with Amazon Echo and
Google Home. Please see our step-by-step guide on:
https://shelly.cloud/compatibility/alexa
https://shelly.cloud/compatibility/assistant
SHELLY APPLICATION
Shelly Cloud gives you opportunity to control and adjust all
Shelly® Devices from anywhere in the world. You only need
an internet connection and our mobile application, installed
on your smartphone or tablet.
Registration
The rst time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly® devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then re-
ceive instructions to change your password.
⚠WARNING! Be careful when you type your e-mail address
during the registration, as it will be used in case you forget
your password.
First steps
After registering, create your rst room (or rooms), where you
are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for auto-
matic turning on or off of the Devices at predened hours or
based on other parameters like temperature, humidity, light
etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mo-
bile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, install it to the power grid fol-
lowing the Installation Instructions included with the Device.
Step 1
After the installation of Shelly following the Instalation In-
structions and the power is turned on, Shelly will create its
own WiFi Access Point (AP).
⚠WARNING! In case the Device has not created its’ own AP
WiFi network with SSID like shelly1pm-35FA58, please check if
the Device is connected accordingly to the Instalation Instruc-
tions. If you still do not see an active WiFi network with SSID
like shelly1pm-35FA58, or you want to add the Device to anoth-
er Wi-Fi network, reset the Device. If the Device has been pow-
ered on, you have to restart by powering it off and on again.
After turning the power on, you have one minute to press 5
consecutive times the button/switch connected SW. You have
to hear the Relay trigger itself. After the trigger sound, Shelly
should return to AP Mode. If not, please repeat or contact our
customer support at: support@Shelly.cloud
Step 2
Choose “Add Device”. In order to add more Devices later, use
the app menu at the top right corner of the main screen and
click “Add Device”. Type the name (SSID) and password for
the WiFi network, to which you want to add the Device.
Step 3
If using iOS: you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open
Settings > WiFi and connect to the WiFi network created by
Shelly, e.g. shelly1pm-35FA58. If using Android your phone/
tablet will automatically scan and include all new Shelly De-
vices in the WiFi network that you are connected to.
Upon successful Device Inclusion to the WiFi network you will
see the following pop-up:
Step 4
Approximately 30 seconds after discovery of any new Devic-
es оn the local WiFi network, а list will be displayed by default
in the “Discovered Devices” room.
Step 5
Enter Discovered Devices and choose the Device you want to
include in your account.
Step 6
Enter a name for the Device (in the Device Name eld).
Choose a Room, in which the Device has to be positioned.
You can choose an icon or add a picture to make it easier to
recognize. Press “Save Device”.
Step 7
To enable connection to the Shelly Cloud service for remote
control and monitoring of the Device, press “YES” on the fol-
lowing pop-up.
Shelly devices settings
After your Shelly device is included in the app, you can con-
trol it, change its settings and automate the way it works.
To switch the Device on and off, use the respective Power
button. To enter at the details menu of the respective Device,
simply click on it’s name. From the details menu you may con-
trol the Device, as well as edit its appearance and settings.
Timer - to manage the power supply automatically, you may
use:
• Auto OFF: After turning on, the power supply will automat-
ically shutdown after a predened time (in seconds). A value
of 0 will cancel the automatic shutdown.
• Auto ON: After turning off, the power supply will be auto-
matically turned on after a predened time (in seconds). A
value of 0 will cancel the automatic power-on.
Weekly schedule - this function requires an Internet connec-
tion. Shelly may turn on/off automatically at a predened
time.
Sunrise/Sunset - this function requires an Internet connec-
tion. Shelly receives actual information about the time of
sunrise and sunset in your area. Shelly may turn on or off
automatically at sunrise/sunset, or at a specied time before
or after sunrise/sunset.
Internet/Security
• WiFi Mode - Client - Allows the device to connect to an
available WiFi network. After typing the details in the respec-
tive elds, press Connect.
• WiFi Mode - Acess Point - Congure Shelly to create a
Wi-Fi Access point. After typing the details in the respective
elds, press Create Access Point.
• Cloud - Enable or Disable connection to the Cloud service.
• Restrict Login - Restrict the web interface of Shely with a
Username and Password. After typing the details in the re-
spective elds, press Restrict Shelly.
Safety - Max Power Protection, congure Shelly to turn off when
a dened power consumption is reached. The range is 1-3500W.
After typing the desired power consumption, press Save.
Settings
• Power On Default Mode - This sets the default output state
when Shelly is powered. ON: Congure Shelly to turn ON,
when it has power. OFF: Congure Shelly to turn OFF, when
it has power.
• Restore Last Mode - Congure Shelly to return to last state
it was in, when it has power.
• Firmware Update - Update the rmware of Shelly, when a
new version is released.
• Time Zone and Geo-location - Enable or Disable the auto-
matic detection of Time Zone and Geo-location.
• Factory Reset - Return Shelly to its factory default settings.
• Device Information - Here you can see the device ID(Unique
ID of Shelly), Device IP(the IP of Shelly in your Wi-Fi network)
• Edit Device - from here you can edit the device name, de-
vice room, device picture.
THE EMBEDDED WEB INTERFACE
Shelly can be set and controlled through a browser.
Abbreviations used
Shelly ID - the unique name of the Device. It consists of 6
or more characters. It may include numbers and letters, for
example 35FA58.
SSID - the name of the WiFi network, created by the Device,
for example shelly1pm-35FA58.
Access Point (AP) - the mode in which the Device creates its
own WiFi connection point with the respective name (SSID).
Client Mode (CM) - the mode in which the Device is connect-
ed to another WiFi network.
Initial inclusion
Step 1
Install Shelly to the power grid following the schemes de-
scribed above and place it into the console. After turning the
power on Shelly will create its own WiFi network (AP).
⚠WARNING! If you don’t see the WiFi please follow the step
1 from the device inclusion section of the guide.
Step 2
When Shelly has created an own WiFi network (own AP), with
name (SSID) such as shelly1pm-35FA58. Connect to it with
your phone, tablet or PC.
Step 3
Type 192.168.33.1 into the address eld of your browser to
load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface. If it
has been set up is correctly, you will see information about
Settings menu button, Current state and Present time.
Settings - general settings. In this menu, you can congure
the Shelly device’s work and connection modes.
WiFi settings - the WiFi connection settings.
Access Point (AP) mode - allows the Device to operate as a
WiFi access point. The User can change the name (SSID) and
the password to access the AP. After you have entered the
desired settings, press Connect.
WiFi client mode (CM) - allows the Device to connect to an
available WiFi network. In order to switch to this mode, the
User must enter the name (SSID) and the password to con-
nect to a local WiFi network. After entering the correct details,
press Connect.
⚠ATTENTION! If you have entered incorrect information
(wrong settings, usernames, passwords etc.), you will not be
able to connect to Shelly and you have to reset the Device.
Login - access to the Device
Leave unprotected - removing the notication for disabled
authorization.
Enable authentication – you can turn authentication on or
off. This is where you can change your username and pass-
word. You must enter a new username and the new pass-
word, then press Save to save the changes.
Connect to cloud - you can turn the connection between
Shelly and Shelly Cloud on or off.
Firmware upgrade - Shows present rmware version. If a
newer version is available, you can update your Shelly Device.
Device reboot - Reboots the device.
MANAGING IN RELAY MODE
Relay Screen
In this screen you can control, monitor and change the set-
tings for turning the power on and off. You can also see the
current status of the connected appliance to Shelly, Buttons
Settings, On and OFF. To control Shelly press Relay:
• To turn on the connected circuit press Turn ON
• To turn off the connected circuit press Turn OFF
Press the icon to go to the previous menu.
Shelly management settings
The same as in inclusion section of the guide.

Termékspecifikációk

Márka: Shelly
Kategória: kapcsoló
Modell: 1PM

Szüksége van segítségre?

Ha segítségre van szüksége Shelly 1PM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kapcsoló Shelly

Shelly

Shelly 1PM Útmutató

19 Augusztus 2024
Shelly

Shelly Pro 4PM Útmutató

19 Augusztus 2024
Shelly

Shelly 1L Útmutató

19 Augusztus 2024
Shelly

Shelly Plus 1PM Útmutató

19 Augusztus 2024
Shelly

Shelly Plus 2PM Útmutató

19 Augusztus 2024
Shelly

Shelly Pro 2 Útmutató

19 Augusztus 2024
Shelly

Shelly WiFi Relay Switch Útmutató

4 Augusztus 2024

Útmutatók kapcsoló

Legújabb útmutatók kapcsoló

Tork

Tork SS700ZA Útmutató

9 Április 2025
Cudy

Cudy FS1024 Útmutató

9 Április 2025
Lancom

Lancom GS-2412 Útmutató

5 Április 2025
Lancom

Lancom GS-2412P Útmutató

5 Április 2025
Lancom

Lancom GS-2426 Útmutató

5 Április 2025
Lancom

Lancom GS-2426P Útmutató

5 Április 2025
Hager

Hager ARF970D Útmutató

3 Április 2025
Hager

Hager ARF920D Útmutató

3 Április 2025
Fantini Cosmi

Fantini Cosmi B12BN Útmutató

2 Április 2025
Fantini Cosmi

Fantini Cosmi B12DN Útmutató

2 Április 2025