Használati útmutató Sharpal 191H

Sharpal késélező 191H

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sharpal 191H (3 oldal) a késélező kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
User Manual
Item No. 191H
BEFORE SHARPENING:
Place the sharpener on a at surface. (See Fig. 1)
To prevent the sharpener and table from being cut by knife or scissors, place the sharpener as close as possible to the
table edge while sharpening. (See Fig. 2)
Press down the black lever securing the sucon pad on surface. When you nish sharpening, pull the lever up, the
sharpener will be separate from the table. (See Fig. 3)
KNIFE SHARPENING INSTRUCTION:
Knife includes all knives of double-beveled edge. This sharpener is not suitable for single-beveled edge knives.
1. Insert blade fully and vercally into appropriate sharpening slot at a 90-degree angle to the sharpener. Gently pull
the knife blade with light pressure from heel to p in direcon of indicator arrows. (See Fig. 4)
No. V-Notch slot (Coarse CARBIDE) - Quickly set a new edge1
No. V-Notch slot (Fine CERAMIC) - Hone for a smooth nished edge2
Note: Light pressure is sucient when using the knife sharpener. Heavy pressure might cause to lose control of the
knife and could cause possible injury. Carefully and gradually increase pressure unl the desired result is achieved.
The No. CERAMIC slot is for ne honing of slightly dull edge. The The No. CARBIDE slot is for dull or damaged edge2 1
that requires new edge seng. Try to sharpen with No. CERAMIC slot rstly for your valuable knives.2
Use No. 2 CERAMIC slot only to sharpen your serrated edge knife. (See Fig.5)
2. Repeat above acon unl blade is sharp. Always pull the blade through the sharpening slot from heel to p,
never back and forth.
SCISSORS SHARPENING INSTRUCTION:
Note: Scissors blades are single-beveled, only sharpen the side of each blade that has a bevel.
Open your scissors and lay the edge to be sharpened of the beveled side of one blade across the carbide sharpening
blade, which is located above the scissors’ icon. Place the open hinged scissors blade all the way up to the horizontal
carbide sharpening blade, and make sure that the scissors blade is angled to make the bevel side of scissors blade fully
lean on the horizontal carbide sharpening blade.
1. With light pressure pull the blade in the direcon of the arrow with a downward moon all the way through the
sharpener following the preset angle on the scissors. (See Fig. 6) Repeat this process several mes unl you
achieve a sharp edge. This may take several passes and you may need to increase your pressure during this
process. .Do not push the scissors blade over the sharpening blade
2. Repeat the above steps for the second scissors blade.
3. Aer sharpening the scissors’ edge, there are specic rough burrs of metal across the sharpened edges of the
blades. Burrs can quickly be removed by seng the scissors back together, and opening and closing them a few
mes.
MAINTENANCE:
1. Clean the exterior with a damp so cloth.
2. Oil or other lubricang liquid is not necessary.
CAUTION: Recommend to wear gloves when sharpening a blade with this product. No need to place free hand on
top of the sharpener during use.
WARNINGS: This product is not a toy. Keep out of the reach of children.
*Watch its demo video on YouTube:
bit.ly/191video
Or scan QR code
*If you want to read the user manual in Spanish and French, please go to SHARPAL website to download it.
www.sharpal.com
*Each SHARPAL product is warranted to be free from defects in material and workmanship for 3 years from the
date of purchase under normal wear and tear, except for damage caused by misuse or alteration. THIS WARRANTY
APPLIES ONLY TO NON-INDUSTRIAL OR NON-COMMERCIAL USE. If you want to make a warranty claim, please
contact us through SHARPAL website or send an email directly to warranty@sharpal.com.

Termékspecifikációk

Márka: Sharpal
Kategória: késélező
Modell: 191H

Szüksége van segítségre?

Ha segítségre van szüksége Sharpal 191H, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók késélező Sharpal

Sharpal

Sharpal 191H Útmutató

2 Szeptember 2024

Útmutatók késélező

Legújabb útmutatók késélező

Einhell

Einhell BT-SH 90/350 Útmutató

8 December 2024
Presto

Presto EverSharp 08800 Útmutató

6 Október 2024
Ambiano

Ambiano GT-AS-01-US Útmutató

18 Szeptember 2024
Graef

Graef Chef's Choice CX125 Útmutató

5 Szeptember 2024
Orava

Orava BN-30 Útmutató

3 Szeptember 2024
Orava

Orava BN-40A Útmutató

3 Szeptember 2024
Orava

Orava BN-10 Útmutató

3 Szeptember 2024
Ikea

Ikea BRILJERA 303.928.03 Útmutató

31 Augusztus 2024
Ikea

Ikea FLAKSA 301.670.03 Útmutató

31 Augusztus 2024
Ikea

Ikea SKÄRANDE 502.891.69 Útmutató

31 Augusztus 2024