Használati útmutató Sekonic C-800

Sekonic Mérőberendezések C-800

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sekonic C-800 (4 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
SPECTROMASTER
C-800
Startup Guide
Thank you for purchasing a SPECTROMASTER C-800.
This Startup Guide introduces the basic operations of this Color Meter.
For details about how to use this Color Meter, please see the Operating
Manual.
1. Download
Please visit www.sekonic.com to download the latest
version of Utility and the operating manual as follows:
■Utility
https://www.sekonic.com/support/downloads/
c-700_800seriesutilityformacandwindows.aspx
■Operating Manual
http://www.sekonic.com/support/instruction
manualuserguidedownload.aspx
2. Check Included Items
The following items are included with the meter
in the package.
Please be sure to check that all noted items are included.
★
If any items are missing, please contact the distributor or the reseller you purchased
the meter from.
★
The USB Mini-B cable is not included in the package. Please obtain this separately.
★
Batteries (2 AA) are not included in the package. Please obtain these separately.
Meter
Startup Guide
(
this document
)
Soft Case Strap Safety
Precaution
&
Safety Precaution
For Proper Operation
Befo re usi ng th is p roduct , plea se re ad thi s "Sa fety P reca ution s" fo
proper operation.
WARNING
The W ARNI NG sy mbol indi cate s the
pos sibi lity of d eath o r serio us i njury if th e
produc t is not used properl y.
CAUTION
The CA UTION s ymb ol in dic ates the
pos sibi lity of m inor t o mod erate pe rsona l
inj ury or p roduc t dama ge if the pro duct is
not u sed p roperly .
NOTICE
The NOTIC E s ymbo l in dica tes c auti ons
or rest ricti ons when u sing the p roduc t.
Ple ase read al l not es to avoi d errors in
operation.
General Safety Information
• Read the Operating Manual before use.
• Keep the Operating Manual on hand for reference at any
time .
• Stop usi ng thi s pro duct when th ere are any a bnorma liti es.
•
• Do no t attem pt to repair th is p roduc t by y ours elf.
• This produc t is inte nded only for pe rsons with expe rt
knowledge.
• Moni tor ch ildre n so that th ey d o not t ouch this produc t.
• Use this produc t in a us age en viron ment desc ribed in th e
Operating Manual.
• This produc t is not w aterproo f.
English
Spectrometer
日本語
カラーメーター
スタートアップガイド
Englis h
Color Meter
S etartup Guid
Spektrometer
Deut sch
S eit gtartanl un
Fra nçais
Spectromètre pour
Guide e ge d dé marra
Españo l
Espectrómetro
Guía e cio d in i
Italiano
Spettrom etro
Guid odua intr ttiva
中文
光谱仪适用于照相摄影
使用简介
C-800
SPEC T ROMAS T ER
<Utility>
<Manual>
English
3. Names of Parts
&
［Rear View］
［Front View］
❶Light Receptor
❷Light Selection Ring
❿Tripod Socket
❸Power Button
❹Display Panel
❺
Measuring Button
❼Memory Button
❻Menu Button
❽
Battery Cover Latch
❾Battery Cover
[Bottom View
]
⓭Strap Eyelet
⓬Sync Terminal
⓫USB Mini-B Connector
［Battery Cover Section］
Battery
Cover Latch
Tabs Battery
Cover
⓮Battery Holder
4. Turning the Power ON/OFF
After installing the batteries, turn the Light Selection Ring ❷ to the
dark calibration position ( ) and turn ON this instrument
by pressing the Power Button ❸.
After the Opening screen displays (for 2 seconds) in the Display
Panel, dark calibration starts. After dark calibration properly ends,
the Measuring screen displays.
&
Light Selection Ring ❷
Power Button ❸
[ ]Opening Screen [
Measuring Screen]
★ You can reduce start up time by simply tapping the screen when the
Opening screen appears.
★
Please wait 3 or more seconds between turning the power ON/OFF.
★
To turn OFF the power, press and hold the Power Button for more than
one second. The meter is powered off after the display disappears.
★ If Dark Calibration Position Conrmation screen appears, set the Light Selection
Ring ❷ to Dark Calibration position and perform calibration again.
*
If "Please set Light Selection Ring for dark
calibration" is displayed, set the Light
Selection Ring ❷ to the dark calibration
position to start calibration.
* When taking measurements, set the Light
Selection Ring ❷ to the range L (icon at
the middle) for ALL ambient light.
For flash light, set the ring to "H" (icon
at the top) high-power (brighter than
640lx·s) ash or "L" (icon at the middle)
for low-power ash (lower than 640lx·s).
Dark Calibration Position
Confirmation Screen
NOTE
Dark calibration is performed when new batteries are used, 24 hours passed
since last use or there is a big change in temperature between turning power
OFF and ON.
Except the cases above, dark calibration after power ON is skipped.
5. Measuring Mode and Display Mode
You can change screens after turning the power on as follows.
Changes from the Measuring screen to each screen.
★
Pressing Menu Button
❻
shifts to the Display Mode Selection screen.
Please set Light Selection
Ring for dark calibration.
[Measuring Mode
Selection
Screen]
[Display Mode
Selection Screen]
1 3
64
97
2
5
8
󱄣󱄡 󱄢
[Measuring Screen
(Text Mode)]

Termékspecifikációk

Márka: Sekonic
Kategória: Mérőberendezések
Modell: C-800

Szüksége van segítségre?

Ha segítségre van szüksége Sekonic C-800, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Mérőberendezések Sekonic

Sekonic

Sekonic C-800 Útmutató

24 Július 2024

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

PCE Instruments

PCE Instruments PCE-PMI 1 Útmutató

14 Január 2025
PCE Instruments

PCE Instruments PCE-324 Útmutató

14 Január 2025
PCE Instruments

PCE Instruments PCE-TC 32N Útmutató

14 Január 2025
PCE Instruments

PCE Instruments PCE-ACO 9500 Útmutató

14 Január 2025
Klein Tools

Klein Tools CL810 Útmutató

14 Január 2025
Klein Tools

Klein Tools CL710 Útmutató

14 Január 2025
Ebro

Ebro PHT 830 Útmutató

13 Január 2025
Kern

Kern FL 1KG Útmutató

11 Január 2025
PeakTech

PeakTech 6193 Útmutató

11 Január 2025
CSL

CSL 306637 Útmutató

10 Január 2025