Használati útmutató Seima SLC-600B

Seima Mosogató SLC-600B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Seima SLC-600B (1 oldal) a Mosogató kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
seima.com.au
Please note
All measurements are in millimetres.
Use silicone sealant. Do not use epoxy type adhesives.
Specifications may vary without notice as part of our continuous improvement practices.
Clean with a damp cloth. Do not use abrasive cleaners, liquids or pastes.
tilos-in | v 3.1
The door is held in place by a with long metal pin
a bend at the top.
To reverse the door opening, the pin can be
swapped to the other side of the cabinet.
Recommended tool:
long nose pliers
Instructions
1 First, remove the sink from the cabinet
to access the door pin from inside the
cabinet.
2 Remove the long pin to free the door.
3 Unscrew the magnetic door closures
and refasten these on the other side of
the door opening.
4 Reverse the door, and re-thread the
pin on the other side. See threading
sequence above.
How to reverse the door opening
Threading sequence
The pin is threaded in the following sequence:
1 Through the hole in the frame at the top of the
unit door opening
2 Then through the holes in the door
3 Then into a small washer
4 Then finally into the hole in the metal ‘L
bracket at the base of the unit
Important notes
The washer must be placed between the door and
metal ‘L bracket at the base of the unit.
The magnetic door closures need to be transferred
to the other side of the cabinet.
Door
Threading sequence for metal pin:
Transfer magnetic
door closures
Installation Guide
Tilos Laundry Unit
Door
interior

Termékspecifikációk

Márka: Seima
Kategória: Mosogató
Modell: SLC-600B

Szüksége van segítségre?

Ha segítségre van szüksége Seima SLC-600B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek