Használati útmutató Seiko SLP-430

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Seiko SLP-430 (24 oldal) a cimkenyomtató kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
User Guide
Models 410, 420, 430, 440, 450
For Windows® 2000, Windows XP and Mac OS® X v10.2 or later.
Smart Label Printers®
Series
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential application. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Seiko Instruments could void the
user’s authority to operate the equipment.
Applicable EC Directives and Standards
Directive Title
89/336/EEC EC Electromagnetic Compatibility Directive
73/28/EEC EC Low Voltage Directive
2002/96/EC ECC Waste of Electronic Equipment (WEEE)
ECC Restricting the use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS)
Standards Title
EMC EN55022(1998) class B
EN55024(1998), EN61000-3-2(1995), EN61000-3-3(1995)
LVD EN60950/1992 +A1/1993, +A2/1993, +A3/1995, +A4/1997,
+A11/1997
Copyright
All rights reserved. No parts of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form, or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of Seiko
Instruments USA Inc. No patent liability is assumed with respect to the use of information
contained herein. While every precaution has been taken in the preparation of this
publication, Seiko Instruments USA Inc. assumes no responsibility for errors or omissions. Nor
is any liability assumed for damages resulting from the use of information contained herein.
Further, this publication and features described herein are subject to change without
notice. Copyright © 1989-2006 by Seiko Instruments USA Inc. All rights reserved.
Trademark Information
IBM is a registered trademark of International Business Machines Corporation. Microsoft
and Windows are registered trademarks of Microsoft Corporation. SII and the SII logo are
registered trademarks of Seiko Instruments Inc. Smart Label Printer is a registered trademark
and SmartLabels, and Smart Label Icons are trademarks of Seiko Instruments USA Inc.
Other products mentioned in this guide are trademarks or registered trademarks of their
respective companies.
Seiko Instruments USA Inc., 2990 Lomita Blvd., Torrance, California 90505 USA
Important Safety Instructions
The following symbols are used in this User Guide.
WARNING. Warning statements are used to indicate actions
that may result in risk of severe personal injury or loss of life.
CAUTION. Caution statements are used to indicate actions
that may result in damage to the printer or other property, or
may result in risk of minor personal injury.
Warning
1 Use only the AC adapter provided with this printer, or an AC adapter that has been
approved by Seiko Instruments for use with this printer. Use of an incorrect AC adapter
may cause risk of overheating or re.
2 Do not bend or place a heavy object on the power cord as it could damage the cord
and result in risk of electric shock or re. Do not use the power cord if damaged or
frayed.
3 The thermal print head may become quite hot after printing. Be careful when changing
labels and cleaning the thermal head.
Caution
1 Never insert objects of any kind into this printer as they may touch dangerous voltage
points or short out parts, and may result in a risk of fire or electric shock. Never spill liquid
of any kind on the printer.
2 This printer contains no user-serviceable parts. Do not attempt to service the printer
yourself as this can expose you to dangerous voltage points or other risks. Repair service
should be performed by a trained technician.
3 Do not use this printer near water or in extreme humidity.
4 Be sure to hold only the connector end of the power cord or interface cable when
disconnecting. Repeated pulling on the cable could damage the cable.

Termékspecifikációk

Márka: Seiko
Kategória: cimkenyomtató
Modell: SLP-430

Szüksége van segítségre?

Ha segítségre van szüksége Seiko SLP-430, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók cimkenyomtató Seiko

Seiko

Seiko SLP-450 Útmutató

13 Augusztus 2024
Seiko

Seiko SLP-420 Útmutató

10 Augusztus 2024
Seiko

Seiko SLP-200 Útmutató

10 Augusztus 2024
Seiko

Seiko SLP-430 Útmutató

10 Augusztus 2024
Seiko

Seiko 620 Útmutató

8 Augusztus 2024
Seiko

Seiko 650SE Útmutató

7 Augusztus 2024
Seiko

Seiko SLP-240 Útmutató

5 Augusztus 2024
Seiko

Seiko SLP-410 Útmutató

4 Augusztus 2024

Útmutatók cimkenyomtató

Legújabb útmutatók cimkenyomtató

Zebra

Zebra ZQ320 Útmutató

12 Január 2025
Godex

Godex RT230 Útmutató

12 Január 2025
Godex

Godex RT860i Útmutató

12 Január 2025
Zebra

Zebra ZD421c Útmutató

5 Január 2025
Honeywell

Honeywell PC45t Útmutató

30 December 2025
TSC

TSC TTP-225 Útmutató

28 December 2024
TSC

TSC Alpha-3R Útmutató

28 December 2024
Brother

Brother PJ-622 Útmutató

15 December 2024