Használati útmutató Seco-Larm VA-1102B-WYQ

Seco-Larm Receiver VA-1102B-WYQ

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Seco-Larm VA-1102B-WYQ (4 oldal) a Receiver kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
®
4-in-1 HD Video Distributors
Manual
Features:
* VA-1104B-WYQ
special order only
TVI / CVI / AHD / Analog compatible
Distributes one video input to two (or four*)
video outputs
Connect to a video camera, multiplexer,
DVR etc.
LED power indicator
Signals are cleaned and buffered to ensure
clear video over the camera's
recommended maximum distance
VA-1102B-WYQ shown
ENFORCER 4-in-1 HD Video Distributors
2 SECO-LARM U.S.A., Inc.
Overview:
ENFORCER 4-in-1 HD Video Distributors are the ideal way to distribute a single video signal to
multiple locations. Using noise-rejection circuitry, the 4-in-1 HD Video Distributors actively
duplicate video signals to be sent to either two (or four*) separate locations. The distributors buffer
incoming signals before duplication for clean transmission.
Model VA-1102B-WYQ VA-1104B-WYQ*
Number of inputs 1x BNC
Number of outputs 2x BNC 4x BNC
Video output format HD-TVI / CVI / AHD / Analog
Video input level 0.8~1.2Vp-p, 75
Video output level 1Vp-p, 75
Image gain 6dB
Video bandwidth 350MHz, -3dB
Power supply 12VDC, 500mA
Current draw 60mA 220mA
Operating humidity 0~95% non-condensing
Operating temperature 32°~131° F (0°~55° C)
Dimensions 25/16"x115/16"x111
/16" (58x49x42 mm) 57/16"x33/8"x13/16" (138x86x30 mm)
Weight 2.5-oz (70g) 4.9-oz (140g)
Parts List:
Specifications:
Introduction:
1x 4-in-1 HD Video
Distributor
1x Manual 1x Power adapter 1x DC Jack connector
2x Mounting screws
(VA-1102B-WYQ)
2x Plastic wall anchors
(VA-1102B-WYQ)
4x Mounting screws
(VA-1104B-WYQ)
4x Plastic wall anchors
(VA-1104B-WYQ)
* VA-1104B-WYQ
special order only
VA-1102B-WYQ shown
* VA-1104B-WYQ
special order only
11/32"
(26mm)
111
/16"
(42mm)
25/16"
(58mm)
Power input
Video output
Power LED
Video input +
115/16"
(49mm)
ENFORCER 4-in-1 HD Video Distributors
SECO-LARM U.S.A., Inc. 3
Sample Application (VA-1102B-WYQ):
Installation:
Sample Application (VA-1102B-WYQ Stacking):
1. Place the 4-in-1 HD Video Distributor where the video inputs and outputs can be easily accessed.
2. Plug the male BNC connector into the input female BNC connector on the distributor.
3. Plug the male BNC connectors into the output female BNC connectors on the distributor.
4. Connect power to the distributor with the included 12VDC power adapter and DC jack connector.
5. Turn on power to the displays and the video output unit the distributor is connected to.
NOTE: Maximum distance between the camera and DVR/monitor is determined by the camera's
recommended maximum distance.
12VDC Power supply
Bullet Camera
Monitor 1 Monitor 2
Max. range between camera and monitor
determined by camera's max. distance
+
Max. range between camera and DVR/monitor
determined by camera's max. distance
DVR
12VDC Power supply
Bullet Camera
Monitor 2
12VDC Power supply
Monitor 1
+
+

Termékspecifikációk

Márka: Seco-Larm
Kategória: Receiver
Modell: VA-1102B-WYQ

Szüksége van segítségre?

Ha segítségre van szüksége Seco-Larm VA-1102B-WYQ, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Receiver Seco-Larm

Útmutatók Receiver

Legújabb útmutatók Receiver

ELAC

ELAC DS-A101-G Útmutató

16 Október 2024
Denon

Denon AVR-S900W Útmutató

16 Október 2024
AKG

AKG HP12U Útmutató

15 Október 2024
ICOM

ICOM IC-M15 Útmutató

14 Október 2024
Apart

Apart SBR160 Útmutató

14 Október 2024
Chord

Chord Anni Útmutató

14 Október 2024