Használati útmutató Scott DJX 100 TT

Scott keverőpult DJX 100 TT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Scott DJX 100 TT (7 oldal) a keverőpult kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
USER MANUAL
www.my-scott.com
DJX 100 TT / VINYL ENCODER 10
PROFESSIONAL USB TURNTABLE
GB-2
USER MANUAL
Vinyl Encoder 10
SAFETY INSTRUCTIONS
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacture’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not try to bypass the safety purpose of the polarized plug. The wide blade is provided for your
safety. If the provided plug does not fit into your wall outlet, consult an electrician for replacement of
the obsolete outlet.
10. Prevent the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and point where from the power cord is connected to the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, exercise caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Serving is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled into
the apparatus or objects have fallen into it, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. The mains plug is used to unplug the device, so it must remain easily accessible.
WARNING
To reduce the risk of the fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts
inside.
Refer servicing to qualified service personnel only.
The lightning flash with an symbol within the equilateral triangle is intended to alert the use to the
presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation mark within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
CAUTION
To prevent any risk of electric shock, ensure that the blades of the polarized plug can be fully inserted,
in order to prevent blade exposure.
GB-3
UNPACKING THE BOX
Before you begin assembly, please be sure all parts and accessories have arrived intact. In order to
do so, please use the check list below:
* Instruction manual * RCA cable * Slipmat * Platter
* 45rpm adaptor * Headshell * AC cord * Counterweight
Note:
* Do not connect the AC power plug before assembly has been completed.
* Before turning the power on, make sure once again all the connections and power voltage that
settings are correct.
Always turn off the power when connecting or disconnecting
* Read this manual carefully before using the unit. Be sure to store the manual in a safe place for
future reference.
* Attach a stylus cartridge to the headshell before assembling the turntable unit
.
1. Unpacking:
Carefully remove the main unit with the packaging material intact from the box. Remove the
packaging material once the unit has been removed from the shipping carton. Be sure to
identify all the accessories located in the packaging material.
2. 45 rpm adaptor
Locate and remove the 45 rpm adapter from the packaging material and place it in the cut out
designed for this purpose on the top of the main unit.
3. Turntable platter:
Remove the turntable platter from the packaging material and gently insert the platter into the
center spindle on the base of the turntable unit.
4. Drive hub:
Pull the belt to the lower side of the turntable over the drive hub.
5. Slipmat:
Remove the black slipmat from the packaging and place it on the platter.
6. Headshell:
Insert the headshell into the front end of the tone arm. While holding headshell firmly onto the front
end of the tone arm, turn the headshell locking nut counterclockwise to firmly secure the headshell
to the tone arm.
7. Counterweight:

Termékspecifikációk

Márka: Scott
Kategória: keverőpult
Modell: DJX 100 TT

Szüksége van segítségre?

Ha segítségre van szüksége Scott DJX 100 TT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók keverőpult Scott

Scott

Scott DJX 10i Útmutató

30 Július 2024
Scott

Scott DJX 100 TT Útmutató

25 Július 2024

Útmutatók keverőpult

Legújabb útmutatók keverőpult

Allen-Heath

Allen-Heath Xone 22 Útmutató

4 Április 2025
Allen-Heath

Allen-Heath MixWizard WZ4-16 Útmutató

4 Április 2025
Auna Pro

Auna Pro 10032076 DJ-21 Útmutató

3 Április 2025
Arendo

Arendo Power Mixer 303085 Útmutató

3 Április 2025
Power Dynamics

Power Dynamics PDM-X Series 172.652 Útmutató

31 Március 2025
Envivo

Envivo 1334 DJ controller Útmutató

28 Március 2025
Power Dynamics

Power Dynamics 171.157 PDM-C405A Útmutató

28 Március 2025
Midas

Midas DL150 series Útmutató

27 Március 2025
Skytec

Skytec 172.976 STM-3020B Útmutató

23 Március 2025
Reloop

Reloop rmx 20 blackfire edition mengpaneel Útmutató

19 Március 2025