Használati útmutató Satex SA 250 digital indicator

Satex mérleg SA 250 digital indicator

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Satex SA 250 digital indicator (20 oldal) a mérleg kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/20
Patroonsweg 23-27
3892 DA Zeewolde - Holland
Tel. +31 36 522 20 30
Fax. +31 36 522 20 60
Email info@weegtechniek.nl
Website www.wee
g
techniek.nl
- Manual
SATEX SA 250
Digital indicator
Weegtechniek
holland b.v.
Manual Indicator SA 250
pag. 0
Pa
g
e
PCG/C SA 250 Indicator Manual 23-03-07
INDEX
General.......………………………………………………………… 1
Application, Weight and Measures Certification………………… 1
Safety…..……………………………………………………………. 1
Maintenance.……………………………………………………….. 1
Start up…….. ……………………………………………………… 2
Technical specifications….………………………………………… 2
Display: keys and display symbols...…..……..…………………. 3
Switching on………………………………………………………… 4
Set zero……………………………………………………………… 4
Tare…...……………………………………………………………… 4
Check weighing……...……………………………………………… 5
Counting parts..……………………………………………………… 5
Hi-Lo check weighing………………………………………………. 5
Hold function….…..………………………………………………… 6
Printing / sending data...…………………………………………… 7
USER MODE
Automatic zero (zero track)………………………………………… 8
Automatic switch off (auto off).......………………………………. 8
Back light display……………...……………………………………. 9
Initial zero setting……………………………………………………. 9
Display speed……………………………………………………….. 9
Printer / RS 232 data output…..…………………………………… 10
Disable double printing…………………………………………….. 10
Extra line feeds …………………………………………………….. 10
Baud rate……………………………………………………………. 11
Hi-Lo setting : on/off , “beeps”……………………………………. 11
CALIBRATION MODE
Divisions…………..………………………………………………… 12
Lock up weight value………………………………………………. 13
Choice calibration procedure……………………………………… 13
One Point calibration...……………………………………………. 14
Multi Points calibration…………………………………………….. 15, 16
RS output, Data communication…………………………………. 17
Loadcell connection.………………………………………………. 17
Malfunctions and error codes……………………………………… 18
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel + 31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax + 31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
pag. 1
Manual Indicator SA 250
PCG/C SA 250 Indicator Manual 23-03-07
General
Thank you for purchasing this SATEX precision digital indicator !
This instrument is equipped with reliable technology and has user friendly operational software.
You will use it many times and it will prove itself to be an easy, speedy and accurate tool.
If any questions raise that are not described in this manual, please address yourselves to your SATEX supplier,
have a look at our website : www.satex.nl or send your questions per email to : info@satex.nl
Application, Weight and Measures certified
The SA 250 digital indicator is designed for accurate and legal weighing, for counting of articles and
for check weighing and filling with settable weight setpoints with LED indicators in the front panel.
The indicator is designed for use in dry, inside conditions, class IP 54. Any 2 mV/V loadcell may be connected
to the indicator.
Take care of a stable position of the connected weighing equipment. Place the equipment in accurate level position
and prevent for vibrations, shocks and radio radiations.
The CE (OIML R76 1992 class III) Certificate of this scale is valid in all European countries.
It is permitted to use a scale, if stamped individually, for weighing for trade purposes.
Safety
Please read this manual thoroughly before start using the scale.
The supplier does not accept any responsibility if the guidelines of this manual are not observed.
Before any work is done on the indicator, power connections from the mains adaptor and the internal battery should
be interrupted. Warranty is void if the scale is opened anyhow.
Breaking of the seal of a stamped scale is a criminal act and causes the complete disapproval of the scale.
The instrument fulfils the requirements laid down in the EG regulations 89/336/EWG and 73/23/EWG for
electromagnetic compatibility and the Council Directive 90/384/EEC for not automatic weighing machines. Exceeding
of the maximum values, laid down in these regulations, must be avoided.
Electrostatic discharges may cause fatal damage to the scale and should be avoided
at all times. I.e. a proper earth connection of the scale and the place of erection is required in such cases.
The mains adaptor has no special protection against humidity and water and should not come into contact with it.
In case this has happened, or the adaptor shows any external damage, the adaptor should not be used any longer.
The built in lead battery should, if it has to be replaced, be disposed off as small chemical waste, not to be added to
normal waste.
Maintenance
Except from regular cleaning with a slightly humid cloth and a not aggressive detergent, further maintenance
is not required. No liquids has to be applied upon the instrument.
However it makes sense to check a scale’s weighing accuracy with regular intervals, using accurate calibration
weights.
Stamped scales are sealed, but a not stamped scale may be adjusted by the user itself using accurate Class M1
weights.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands

Termékspecifikációk

Márka: Satex
Kategória: mérleg
Modell: SA 250 digital indicator

Szüksége van segítségre?

Ha segítségre van szüksége Satex SA 250 digital indicator, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mérleg Satex

Útmutatók mérleg

Legújabb útmutatók mérleg