Használati útmutató Satel S-3

Satel Deur-/frame érzékelő S-3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Satel S-3 (2 oldal) a Deur-/frame érzékelő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
S-1 / S-2 / S-3
MAGNETIC CONTACT
s123_en 08/19
The S-1 / S-2 / S-3 magnetic contact can detect opening of a door, window, etc. Additionally, it is
provided with a tamper loop. The S-1 magnetic contact is designed for surface mounting, and the S-2
and S-3 magnetic contacts – for flush mounting.
1. Description
The device consists of a contact (reed switch) and a magnet. Moving the magnet away from the
contact (opening the door or window) opens the reed switch contacts (thus triggering alarm).
Both magnetic contact elements are placed in identical waterproof enclosures. The S-1 and S-2
enclosures are made of plastic, while the S-3 enclosure is made of metal. The contact has 4 wires.
The two twisted wires are a tamper loop. The contacts are shown in the figures below.
2. Installation
The contact should be mounted on a fixed surface (e.g. window or door frame), and the magnet on
a movable surface (e.g. window or door). Do not install the magnetic contact on ferromagnetic
surfaces and near to strong magnetic and electrical fields, because it can result in malfunctioning of
the device. When mounting the magnetic contact, you must take into account the make distance.
The S-1 magnetic contact is designed for surface mounting. Place the contact and magnet in parallel
next to each other (Fig. 4). The magnetic contact elements can be attached with screws, double-sided
tape or glue.
The S-2 and S-3 magnetic contacts are designed for flush mounting in wood or plastic. Place the
contact and magnet facing each other (Fig. 5 – as shown by the example of S-3). To make holes for
2 S-1   S-2 S-3 SATEL
the magnetic contact elements, use a ø9 mm drill. Press the S-2 magnetic contact elements or screw
the S-3 magnetic contact elements into the holes made.
Notes:
Do not use a hammer to drive the contact into the hole (it may damage the reed switch).
When screwing the S-3 contact into the hole, the wires become twisted. To prevent them from
damage, twist the wires against the direction of screwing before installation.
magnet.
contact.
A – make distance.
B – permissible offset between contact and magnet axes: S-2 = 10 mm, S-3 = 12 mm.
C – minimum thickness of the wall in which magnetic contact elements can be mounted: 10 mm.
3. Specifications
Magnetic contact type......................................................................................................................... NC
Maximum switching voltage.............................................................................................................. 20 V
Maximum switching current ........................................................................................................... 20 mA
Contact resistance.......................................................................................................................150 mΩ
Minimum life expectancy (20 V, 20 mA) ......................................................................................360 000
Contact material ...............................................................................................................Ru (ruthenium)
Make distance S-1................................................................18 mm
S-2................................................................28 mm
S-3................................................................15 mm
Break distance S-1................................................................28 mm
S-2................................................................40 mm
S-3................................................................24 mm
Environmental class according to EN50130-5........................................................................................II
Operating temperature range ............................................................................................ -10°C...+55°C
Maximum humidity........................................................................................................................ 93±3%
Weight S-1....................................................................29 g
S-2....................................................................28 g
S-3....................................................................43 g
The declaration of conformity may be consulted at www.satel.eu/ce
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. +48 58 320 94 00
www.satel.eu

Termékspecifikációk

Márka: Satel
Kategória: Deur-/frame érzékelő
Modell: S-3

Szüksége van segítségre?

Ha segítségre van szüksége Satel S-3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Deur-/frame érzékelő Satel

Satel

Satel AMD-103 Útmutató

19 Augusztus 2024
Satel

Satel S-3 Útmutató

17 Augusztus 2024
Satel

Satel AVD-100 Útmutató

15 Augusztus 2024

Útmutatók Deur-/frame érzékelő

Legújabb útmutatók Deur-/frame érzékelő

Optex

Optex OA-4500 Útmutató

31 December 2025
Pentatech

Pentatech MA80KM Útmutató

22 December 2024
Optex

Optex OA-6500 Útmutató

6 December 2024
Optex

Optex OM-106C Útmutató

6 December 2024
Optex

Optex OA-Edge T Útmutató

6 December 2024
EZVIZ

EZVIZ T1 Útmutató

14 Október 2024
Schwaiger

Schwaiger HSA250 532 Útmutató

7 Október 2024
Optex

Optex OA-Flex T Útmutató

4 Október 2024
Optex

Optex OP-08C Útmutató

17 Szeptember 2024
Kidde

Kidde K10LLDCO Útmutató

13 Szeptember 2024