Használati útmutató Sanyo HT27546

Sanyo televízió HT27546

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sanyo HT27546 (2 oldal) a televízió kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
AS
Quik ‘N Easy Setup
Call Us, We Can Help!
1-800-877-5032
www.sanyoctv.com
Part Number: 1JC6P1P0231A-
BEGIN ALL CHANNEL SEARCH
Channel Search Note:
Before starting All Channel Search, point your anten-
na(s) toward the transmitting tower(s). (Log onto
www.antennaweb.org, then type in your street
address and zip code to view a list of your local chan-
nels and the type of antenna that is necessary to receive
them. Click on “View Street Level Map” to see a map
and graph of the transmitting towers in your area.)
The channel search process may take a few minutes.
Please be patient.
Monitor Usage Note:
If you did not connect an
antenna in Item 1,you must
run All Channel Search twice.
Follow the on-screen instruc-
tions. See Item 3 below to
connect a DVD player or sim-
ilar Audio Video (AV) device.
After the second channel
search is complete, you can
use the key to selectINPUT
the AV inputs, for monitor use.
1Press the POWER key.
2Press the (channel up) key to startCH L
All Channel Search.
SEARCH FOR AVAILABLE
CHANNELS
2nd
BEFORE YOU MAKE ANY AV CONNECTIONS...
THE SIGNAL MAKES THE DIFFERENCE
Signal quality is the factor affecting picture quality.Number One
That being said, it is important to understand that the signal will repro-
duce differently, depending on how you connect your external equip-
ment to the DTV.
Critical Hookup Advice for Best Picture
1. DO NOT connect your DVD
player or similar digital AV
device to the Composite
VIDEO2 jacks on the DTV.
2. DO NOT connect the RF
output of a Satellite receiver or
Digital Cable box to the RF
input terminal on the DTV
(UHF/VHF/CATV).
These connections should be used
only with Analog equipment, such
as a VCR. Avoid connecting digi-
tal equipment to these jacks, as
that will reduce the picture quality.
To display the clearest images
from your DVD player or other
digital AV device, you must con-
nect them to the DTV using the
COMPONENT input jacks.
DVD PLAYER CONNECTION (most common method)
THE SIGNAL MAKES THE DIFFERENCE
The Component jacks on this DTV will accept any video signal resolu-
tion, making Component a great choice when connecting your DVD
player or similar digital AV device, such as, a Satellite receiver, Digital
Cable Box, or video game.
Connecting a DVD Player to the Component Video2 Jacks
1Simply connect a Component
cable’s Red, Blue, and Green
connectors to the VIDEO2 Red,
Blue, and Green video jacks on
the DTV and to a DVD player,
as shown here. (Cable is not
supplied.)
2Then connect an Audio cable’s
White and Red connectors to
the VIDEO2 audio jacks and to
the DVD player. (Cable is not
supplied.)
3Use the key on theINPUT
remote control to select Com-
ponent2 as the input source.
NOTE: The Component and Composite
VIDEO2 inputs share the same
audio inputs, therefore, you can
connect only one device at a time to
the VIDEO2 inputs.
DVD PLAYER AND OTHER
DIGITAL EQUIPMENT CONNECTIONS
3
3
3
3
3r
r
r
r
rd
d
d
d
d
First
Please connect all signals
and antennas to jacks and
the terminals on the back.
Then press Channel UP key.
Initial On-Screen Display
No input signal sources
could be located.
Please check cable or
antenna connections.
Then press Channel UP key.
No Signal Detected—Press CH LAgain
VIDEO(MONO)
VIDEO2
(MONO)
S-VIDEO
UHF
VHF
CATV
R
L
Y
LR
PBPR
DIGITAL AUDIO
OUTPUT
AUDIO
OUTPUT
DIGITAL
AUDIO OUT
COMPONENT OUT
(1080i/720p/480p)
Y
P
B
PR
A/V OUT
(480i)
S-VIDEO
OUT
AUDIO
L
R
VIDEO
IN
OUT (1080i/7
HDMI
OUTPUT
DO NOT Connect Your
DVD Player to the Composite Input Jacks
DO NOT Connect a Satellite Receiver
or Digital Cable Box to the RF Terminal
© 2006 Sanyo Manufacturing Corporation
CONNECT DIGITAL ANTENNA
To receive your Digital channels youlocal
must connect an antenna to the Digital
Antenna In terminal on the back of the
DTV. Other digital signals can be received
from a set-top box (STB) through the
Component INPUT2 jacks (Item 3 below).
The signal makes the difference.
To receive analog channels, connect an
antenna or your cable system to theanalog
UHF/VHF/CATV terminal.
CONNECT
ANTENNAS
1st
VIDEO
DIGITAL ANTENNA IN
(MONO)
VIDEO2
(MONO)
S-VIDEO
UHF
VHF
CATV
R
L
Y
LR
P
B
P
R
DIGITAL AUDIO
OUTPUT
AUDIO
OUTPUT
DIGITAL
ANTENNA IN
UHF/VHF/CATV
Antenna
Antenna
or
Cable
VIDEO
DIGITAL ANTE
(MONO)
VIDEO2
(MONO)
S-VIDEO
UHF
VHF
CATV
R
L
LR
DIGITAL AUDIO
OUTPUT
AUDIO
OUTPUT
HDMI
INPUT
VIDEO OUT SELECT
COPONENT
S
YPBPR
R L
COMPONENT VIDEO OUT
S-VIDEO OUT
DIGITAL
OUT
OPT.
AUDIO OUT VIDEO OUT
DTV Back
DTV
Back
1
7
4 5 6
1 2 3
8 9
POWER
INPUT
7
4 5 6
1 2 3
8 9
CAPTION EXIT
VOL
RESETAUD IOPIX SHAPE
CH
POWER
key
CHANNEL
UP key
VIDEO OUT SELECT
COPONENT
S
YP
B
P
R
AUDIO OUT
R L
VIDEO OUT
COMPONENT VIDEO OUT
S-VIDEO OUT
DIGITAL
OUT
OPT.
VIDEO
VIDEO2
S-VIDEO
R
L
YP
R
P
B
LR
AUDIO
OUTPUT
(MONO)
DVD Player
(or Satellite receiver,
Digital Cable box,
video game, etc.)
NOTE: Subscription
to Cable or Satellite service is required
for those connections.
Video
(Step 1)
Audio
(Step 2)
DTV
Back
TUNER
INPUT
key
M
GOOD AND BETTER RESOLUTION
THE SIGNAL MAKES THE DIFFERENCE
The standard analog AV and S-Video composite connectors are
included on your new DTV to provide continued compatibility with
older analog devices, such as a VCR.
The S-Video connector will provide the best resolution. If you have an
S-Video connector on your old analog equipment, you should use it
instead of the standard video connector.
1Connect your external equipment as shown here, matching con-
nector colors to jack colors. (Cables are not supplied.)
2Use the key on the remote control to select Video 2 to watch video fromINPUT
equipment connected to the VIDEO2 Composite jacks.
NOTES:Composite and Component VIDEO2 inputs share the same audio inputs,
therefore, you can connect only one device at a time to the VIDEO2 inputs.
Connect other analog device to the Front AV jacks (VIDEO1). Refer to the
owner’s manual for instructions.
S-Video
Audio/Video
Analog Device
CHOOSE THE BEST CONNECTION
FOR YOUR ANALOG EQUIPMENT
4
4
4
4
4t
t
t
t
th
h
h
h
h
The aspect ratio (ratio of the width
to the height) of the broadcast
image and the aspect ratio of the
original program material all
affect picture shape.
Identifying Picture Shapes
Letterbox—This describes a wide
screen image displayed on a 4:3
aspect ratio screen.
Postage Stamp—This describes
an image that has a black border
surrounding the picture (images
fail to fill screen both vertically
and horizontally). This can occur
when the broadcaster upconverts
4:3 programming to wide screen
format (16:9).
Use the key to adjustPIX SHAPE
the image to suit your personal
preference. Available shapes may
vary by broadcast and input mode.
Available options are Pix1, Pix2,
and Pix3.
NOTE: The shapes available to you
depend on the aspect ratio of the
broadcast signal and the input
mode. They may differ in appear-
ance from those represented here.
IDENTIFYING PICTURES SHAPES
AND PIX SHAPE KEY OPERATION
6
6
6
6
6t
t
t
t
th
h
h
h
h
Simulated TV Images
3 4
R-AUDIO-L
R-AUDIO-L VIDEO
VIDEO
VHF/UHF
TO TV
FROM ANT.
RF
CHANNEL
IN
OUT
IN
OUT
S-VIDEO OUT
VIDEO
DIGITAL ANTENNA IN
(MONO)
VIDEO2
(MONO)
S-VIDEO
UHF
VHF
CATV
R
L
Y
LR
P
B
P
R
DIGITAL AUDIO
OUTPUT
AUDIO
OUTPUT
DTV Back
CAPTION EXIT
VOL
RESETAUDIOPIX SHAPE
CH
PIX SHAPE
key
Postage Stamp
Zoom
DTV ADD-ON SEARCH
Use this feature to add digital channels to the
digital channel database of active channels.
If necessary, after the initial All Channel
Search, turn the antenna then use the Setup
Menu to perform a DTV Add-on Search.
Repeat these steps, as necessary, for each
transmitting tower (channel) in your area.
Log on to www.antennaweb.org for a list of
those channels.
A DTV Add-on Search will take a few min-
utes to complete.
NOTE: DTV Add-on Search will not affect channels
already in the digital channel database. It will
only add new channels that may be found.
1Press the key to select theTUNER
Digital Tuner. The channel display will
begin with the letter “D,” such as, D03-1.
2Press the MENU key.
3Use the keys to high-CURSOR LM
light DTV Add-on Search.
4Press the key so the redCURSOR >
arrow ( ) points toward ©Yes.
5Press .ENTER
ADDING NEW DIGITAL CHANNELS
TO THE DIGITAL CHANNEL DATABASE
5
5
5
5
5t
t
t
t
th
h
h
h
h
7 8 9
INFO
RECALL
MENU
CAPTION EXIT
ENTER
TUNER MUTE
SLEEP
0
7 8 9
0
3
CURSOR LM
keys
1
TUNER key
M
M
>
>
1
4 5 6
1 2 3
POWER
INPUT
4 5 6
1 2 3
INPUT
key
2
MENU key
5
ENTER key
4
CURSOR >
key
Remote Control
Remote Control
Remote Control

Termékspecifikációk

Márka: Sanyo
Kategória: televízió
Modell: HT27546

Szüksége van segítségre?

Ha segítségre van szüksége Sanyo HT27546, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók televízió Sanyo

Sanyo

Sanyo DP26648 Útmutató

22 Szeptember 2024
Sanyo

Sanyo AVM27D6 Útmutató

14 Szeptember 2024
Sanyo

Sanyo HT27546 Útmutató

11 Szeptember 2024
Sanyo

Sanyo DP19241 Útmutató

11 Szeptember 2024
Sanyo

Sanyo FW42D25T Útmutató

3 Augusztus 2024
Sanyo

Sanyo DS24205 Útmutató

3 Augusztus 2024
Sanyo

Sanyo DP42849 Útmutató

29 Július 2024
Sanyo

Sanyo DP26671 Útmutató

29 Július 2024
Sanyo

Sanyo FW55C87F Útmutató

28 Július 2024
Sanyo

Sanyo DP42861 Útmutató

26 Július 2024

Útmutatók televízió

Legújabb útmutatók televízió

AKAI

AKAI ATD2110X Útmutató

16 Október 2024
Sony

Sony KE-65A8 Útmutató

16 Október 2024
Sharp

Sharp LC70LE741E Útmutató

16 Október 2024
Samsung

Samsung QN85QN800AF Útmutató

16 Október 2024
Thomson

Thomson 24TM2490 Útmutató

15 Október 2024
Daewoo

Daewoo DSJ-5520 Útmutató

15 Október 2024
Sharp

Sharp LC-52D65U Útmutató

15 Október 2024
Medion

Medion MD30348 Útmutató

15 Október 2024
Hisense

Hisense 50A7100FTUK Útmutató

15 Október 2024
Grundig

Grundig 55 GOB 9480 Útmutató

15 Október 2024