Használati útmutató Saitek Pro Flight Throttle Quadrant

Saitek vezérlő Pro Flight Throttle Quadrant

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Saitek Pro Flight Throttle Quadrant (27 oldal) a vezérlő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/27
Pro Flight Throttle Quadrant
Saitek
TM
User Guide
2 3
SAITEK PRO FLIGHT THROTTLE QUADRANT
Congratulations on buying the Saitek Pro Flight Throttle Quadrant. The Pro Flight
Throttle Quadrant features realistic controls configurable for all the major flight
simulation software to make your flying experiences more realistic.
Installing the throttle quadrant
First, screw the mounting plate to the throttle quadrant using the four screws provided.
You can screw the plate to one of two sides of the quadrant depending on how you
want to mount the quadrant - either in front and below your table or on top of it. Please
note that whichever way you choose to mount the quadrant, ensure that as you look at
the unit the rocker switches are at the bottom. Now tighten the throttle unit clamp’s
screw mechanism until it is firmly attached to your table (be careful not to overtighten
the screw as you may damage the clamp).
Plug the throttle quadrant’s USB cable into one or your PC’s free USB ports (or Saitek
Pro flight yoke USB hub).
Your throttle quadrant comes supplied with additional lever knobs to configure any
combination of throttle, flaps, mixture or prop pitch. You can also buy additional
quadrants to link together for more complex multi-engined aeroplane configurations
and we have included a 4-way throttle knob which links 4 quadrant levers for control of
4-engined aircraft.
Software installation for users of Windows® XP, XP64 and Vista
A) Drivers Only For Typical Users
1. With your computer switched on, close down any programs that are currently
running and insert the Installation CD into your CD-ROM drive.
2. When the Introduction Screen appears, click Install Software to continue. If the CD
does not run automatically, select from the Windows® Taskbar, then Start Run and
type D:\Setup.exe and click - where D:\ is letter of your CD-ROM drive. OK
3. When the Welcome screen appears, click to continue. Next
4. After reading the Disclaimer, select the I accept the terms of the Disclaimer
option and click to continue. Next
5. At the Driver Setup screen, if you haven't already done so, plug the USB cable into
one of your computer's USB ports and click on Next.
6. At the Driver Setup screen, click to test your controller. Next
Detachable lever knobs to configure any
combination of throttle, flaps, mixture or prop pitch.
Smooth travel levers with 0 button detent
Three 2-way rocker switches
How to assign Quadrant controls to Flight Simulator functions
As you will normally be using the Pro Flight Quadrant alongside another controller in
Flight Simulator, you will need to ensure that you set the levers up correctly within the
game. By default, Flight Simulator will assign them to control the ailerons, elevator and
throttle, which will normally be in addition to that which your other controller is already
controlling; this will cause problems!
To reassign the levers correctly, you must use the Assignments (Flight Simulator 2004)
or Controls (Flight Simulator X) screen within the game. This is accessed from the
Settings menu within the game.
When you access the Assignments/Controls screen in Flight Simulator, ensure that the
Saitek Pro Flight Throttle Quadrant is selected in the option labeled Joystick Type.
Now select Joystick Axes (Flight Simulator 2004) or Control Axes (Flight Simulator X)
at the top of the window.
Once you have done this, simply find the command that you want to assign to your
controller from the list of commands, click it and then click the Change Assignment
button. A window will appear asking you to move the part of your controller that you
want to assign to that command - move the axis that you want to assign to that
command and then click OK.
Tip: You must ensure that none of the levers are assigned to the Aileron Axis or
Elevator Axis commands, otherwise they will interfere with your other controller that
you are using alongside the Saitek Pro Flight Throttle Quadrant.
If you wish to reassign the toggle switches on the Quadrant to other functions then you
must use the Buttons/Keys tab at the top of the Assignments/Controls window.
Programming your Saitek Pro Flight Throttle Quadrant with Saitek
Smart Technology software
Introducing Saitek Smart Technology programming software
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies
to configure your Saitek controller for enhanced functionality. SST delivers a powerful
5
7. When the Saitek Controller screen appears, try out all your controller's buttons and
controls to show that it is working properly. When you have finished, click OK.
8. At the Software Setup screen, select Do not install the SST Programming
Software Nextand click . The Programming Software can be installed at a later
date by following instruction (B). below
9. At the Registration screen, select and follow theCheck this box to register now
on-screen instructions, or you can choose to select this option later.
10.Click on to complete the installation. Finish
B) Drivers and Programming Software For Advanced Users
Follow points 1 - 7 of the install procedure in A), then at the Software Setup screen,
select Install the SST Programming Software and click Next.
In the following Software Setup screen, click Next and follow the on-screen
instructions. At this point you will be asked to install such features as the Saitek Magic
Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard Device
(these are what XP calls the Programming elements of your Saitek controller).
Continue to click on to accept the installation until the RegistrationNext Finishand
screen appears.
At the Registration screen, select and follow the on-Check this box to register now
screen instructions, or do not select this option and register later.
Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the programming environment. If you do not wish to see the
Profile Editor at this point, just uncheck the box and click on to complete theFinish
installation.
IMPORTANT INFORMATION
Driver updates
From time to time there may be updates to the driver and programming software for
this product. You can check for the latest software updates by visiting the Saitek
website (www.saitek.com) and clicking on Downloads. A drop down menu will appear.
Select Drivers and Software.

Termékspecifikációk

Márka: Saitek
Kategória: vezérlő
Modell: Pro Flight Throttle Quadrant

Szüksége van segítségre?

Ha segítségre van szüksége Saitek Pro Flight Throttle Quadrant, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő Saitek

Saitek

Saitek PS2700 Útmutató

3 Október 2024
Saitek

Saitek Flight Simulation Pro Flight Switch Panel Útmutató

27 Szeptember 2024
Saitek

Saitek Pro Flight Throttle Quadrant Útmutató

21 Szeptember 2024
Saitek

Saitek P3200 Útmutató

8 Szeptember 2024
Saitek

Saitek Pro Flight Rudder Pedals PC Útmutató

24 Július 2024
Saitek

Saitek P990 Útmutató

22 Július 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

GVM

GVM YK22 Útmutató

11 December 2024
IVT

IVT MPPTplus+ 20A Útmutató

11 December 2024
IVT

IVT SCDplus Útmutató

11 December 2024
Alfatron

Alfatron ALF-IPCON-HDMI Útmutató

10 December 2024
Hotone

Hotone Ampero Control Útmutató

8 December 2024
Hotone

Hotone Patch Kommander Útmutató

8 December 2024
IFM

IFM AC1317 Útmutató

6 December 2024
PCE Instruments

PCE Instruments PCE-RE100P Útmutató

16 Október 2024
PCE Instruments

PCE Instruments PCE-RE21R Útmutató

16 Október 2024
Thrustmaster

Thrustmaster Ferrari GT Experience Útmutató

13 Október 2024