Használati útmutató Saitek 3D 380 2.1 Active Speakers

Saitek Vegyes - Egyéb 3D 380 2.1 Active Speakers

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Saitek 3D 380 2.1 Active Speakers (11 oldal) a Vegyes - Egyéb kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/11
Saitek
3D 380
2.1 Active Speakers
USER GUIDE
BEDIENUNGSANLEITUNG
GUIDE D’UTILISATION
MANUALE D’USO
MANUAL DEL USUARIO
TM
3D380_Manual_MP.qxd 11/07/2007 10:33 Page 1
If you do not have access to the internet, or if the website cannot answer your
question, please contact your local Saitek Technical Support Team. We aim to offer
quick, comprehensive and thorough technical support to all our users so, before you
call, please make sure you have all the relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate Technical
Support Center sheet that came packaged with this product.
Information for Customers in the United States
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 This device may not cause harmful interference, and;
2 This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA
Canada 210
Operation is subject to the following two conditions:
1 This device may not cause interference, and;
2 This device must accept any interference, including interference that may cause
undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Saitek 3D 380 2.1 Active Speakers
Congratulations on buying the Saitek 3D 380 2.1 Active Speakers. The Saitek 3D 380
has a woofer unit and two satellite speakers plus bass contour control to give you
enhanced bass and clear treble from any music source.
Operating the Saitek 3D 380 is simple:
1 Plug the AC power cord into the bass woofer unit’s AC in socket. Insert the mains
plug into a wall socket and switch on.
2 Plug the PS/2 cable from the right satellite speaker into the “R” output on the woofer
unit and the left speaker cable into the “L” output on the woofer.
3 Plug one end of the 3.5mm jackplug cable into the audio out socket of your PC, iPod,
MP3 player, PSP etc, and the other end into the “input” socket on the woofer unit.
4 Power up the speaker system power by pressing the on/off switch on the woofer unit
and turn the volume control clockwise to switch the system on.
5 With the 3D 380’s volume control at 0, turn on your music source, press Play and
adjust the volume level of your PC, iPod, MP3 player, PSP etc to three quarters. Now
turn up the 3D 380’s volume to the desired listening level.
6 You can use the Saitek 3D 380’s bass contour control to adjust the frequency
response of the speaker system to suit your listening environment. To increase bass
boost, turn the bass contour control clockwise. To reduce bass boost, turn the bass
contour control anti-clockwise.
7 Do not use your 3D 380 at excessive volume levels. If your 3D 380 sounds distorted,
turn down the volume and/or bass contour controls until the distortion stops.
Positioning the 2.1 speaker system
You can position the 3D 380 satellite speakers in three different ways to suit your
listening environment and preferred sound.
Technical Support
Can't get started - don't worry, we're here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they have
just not been installed properly.
If you experience any difficulty with this product, please first visit our website
www.saitek.com. The technical support area will provide you with all the information you
need to get the most out of your product and should solve any problems you might
have.
3D380_Manual_MP.qxd 11/07/2007 10:33 Page 2
Aktive 2.1-Lautsprecher Saitek 3D 380
Herzlichen Glückwunsch zum Kauf der aktiven 2.1-Lautsprecher Saitek 3D 380. Das
System Saitek 3D 380 besitzt eine Basseinheit und zwei Satellitenlautsprecher plus
Basskontursteuerung, wodurch Sie verstärkte Bässe und klare Höhen aus jeder
Musikquelle erhalten.
Die Bedienung des Saitek 3D 380 ist einfach:
1 Stecken Sie das Netzkabel in die Buchse "AC in" der Basslautsprechereinheit.
Schließen Sie den Netzstecker an eine Wandsteckdose an und schalten Sie ein.
2 Stecken Sie das PS/2-Kabel des rechten Satellitenlautsprechers in den Ausgang "R"
der Basseinheit und das des linken Lautsprechers in den Ausgang "L" des
Basslautsprechers.
3 Stecken Sie ein Ende des 3,5-mm-Klinkenkabels in die Buchse "Audio out" von PC,
iPod, MP3-Player, PSP usw. und das andere Ende in die Buchse "Input" an der
Basseinheit.
4 Fahren Sie das Lautsprechersystem hoch, indem Sie den Ein-/Ausschalter an der
Basseinheit drücken und den Lautstärkenregler im Uhrzeigersinn drehen, um das
System einzuschalten.
5 Behalten Sie zunächst die Lautstärkeeinstellung 0 für das 3D 380 bei, drücken Sie
Play und stellen Sie die Lautstärke Ihres PCs, iPods, MP3-Players, PSP usw. auf
drei Viertel. Jetzt drehen Sie die Lautstärke des 3D 380 auf das gewünschte
Hörniveau.
6 Sie können die Basskontursteuerung benutzen, um den Frequenzgang des
Lautsprechersystems an Ihre Hörumgebung anzupassen. Zur Verstärkung der
Bässe drehen Sie die Basskontursteuerung im Uhrzeigersinn. Zur Verringerung der
Bässe drehen Sie die Basskontursteuerung gegen den Uhrzeigersinn.
7 Verwenden Sie das 3D 380 nicht bei zu hoher Lautstärke. Falls das 3D 380 verzerrt
klingt, drehen Sie die Lautstärke und/oder die Basskontursteuerung herunter, bis die
Verzerrung aufhört.
Positionierung des Lautsprechersystems
Sie können die Lautsprecher des 3D 380 auf drei verschiedene Weisen positionieren,
um sie an Ihre Hörumgebung anzupassen und Ihr bevorzugtes Klangbild zu schaffen.
Technischer Support
Probleme - keine Angst, wir lassen Sie nicht im Stich!
Wussten Sie, dass fast alle Produkte, die als fehlerhaft an uns zurückgeschickt werden,
überhaupt nicht defekt sind? Sie wurden einfach nicht richtig installiert!
Sollten Sie Probleme mit diesem Produkt haben, besuchen Sie bitte zuerst unsere
Conditions of Warranty
1 Warranty period is 2 years from date of purchase with proof of purchase submitted.
2 Operating instructions must be followed.
3 Specifically excludes any damages associated with leakage of batteries.
Note: Batteries can leak when left unused in a product for a period of time, so it is
advisable to inspect batteries regularly.
4 Product must not have been damaged as a result of defacement, misuse, abuse,
neglect, accident, destruction or alteration of the serial number, improper electrical
voltages or currents, repair, alteration or maintenance by any person or party other
than our own service facility or an authorized service center, use or installation of
non-Saitek replacement parts in the product or the modification of this product in
any way, or the incorporation of this product into any other products, or damage to
the product caused by accident, fire, floods, lightning, or acts of God, or any use
violative of instructions furnished by Saitek plc.
5 Obligations of Saitek shall be limited to repair or replacement with the same or
similar unit, at our option. To obtain repairs under this warranty, present the product
and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support
Center (listed on the separate sheet packaged with this product) transportation
charges prepaid. Any requirements that conflict with any state or Federal laws, rules
and/or obligations shall not be enforceable in that particular territory and Saitek will
adhere to those laws, rules, and/or obligations.
6 When returning the product for repair, please pack it very carefully, preferably using
the original packaging materials. Please also include an explanatory note.
7 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check
carefully that you have read and followed the instructions in this manual.
This warranty is in lieu of all other expressed warranties, obligations or liabilities.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO
THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitations may
not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow
the exclusion or limitation of special, incidental or consequential damages, so the
above limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
This symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of its life separately
from your household waste. There are separate collection systems for
recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
3D380_Manual_MP.qxd 11/07/2007 10:33 Page 4

Termékspecifikációk

Márka: Saitek
Kategória: Vegyes - Egyéb
Modell: 3D 380 2.1 Active Speakers

Szüksége van segítségre?

Ha segítségre van szüksége Saitek 3D 380 2.1 Active Speakers, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vegyes - Egyéb Saitek

Saitek

Saitek CONTROL DECK FOR PC Útmutató

24 Augusztus 2024
Saitek

Saitek 3D 380 2.1 Active Speakers Útmutató

24 Augusztus 2024
Saitek

Saitek 3D 210 Stereo Speaker System Útmutató

24 Augusztus 2024
Saitek

Saitek PRECISION CONTROL PACK Útmutató

24 Augusztus 2024
Saitek

Saitek 3D 590 2.1 Active Speakers Útmutató

24 Augusztus 2024
Saitek

Saitek Hi-Speed USB 2.0 Hub Útmutató

24 Augusztus 2024
Saitek

Saitek Pro Flight Headset Útmutató

24 Augusztus 2024

Útmutatók Vegyes - Egyéb

Legújabb útmutatók Vegyes - Egyéb

Alesis

Alesis Q49 Útmutató

5 Október 2024
Newstar

Newstar FPMA-DTB200 Útmutató

26 Szeptember 2024
Sitecom

Sitecom LN-403 IP camera Útmutató

22 Szeptember 2024
Newstar

Newstar FPMA-D935D4 Útmutató

18 Szeptember 2024
Envivo

Envivo 1092b USB 3.0 Express kaart Útmutató

17 Szeptember 2024
Newstar

Newstar FPMA-LIFT100 Útmutató

17 Szeptember 2024
Trekstor

Trekstor DataStation picco SSD 3.0 Útmutató

16 Szeptember 2024
SIM

SIM SimPC All-in-One - 2016 Útmutató

28 Augusztus 2024
Ewent

Ewent EW3967 Útmutató

24 Augusztus 2024
Ewent

Ewent EW3974 Útmutató

24 Augusztus 2024