Használati útmutató RYOBI One+ R18GN18X

RYOBI Körömápoló készlet One+ R18GN18X

Olvassa el alább 📖 a magyar nyelvű használati útmutatót RYOBI One+ R18GN18X (108 oldal) a Körömápoló készlet kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/108

R18GN18X

Important!

It is essential that you read the instructions in this manual before assembling, maintaining and operating

the product.

Attention!

Il est essentiel que vous lisiez les instructions contenues dans ce manuel avant d’assembler, d’entretenir

et d’utiliser le produit.

Achtung!

Es ist wichtig, dass Sie vor Zusammenbau, Wartung und Benutzung des Produktes die Anweisungen in

dieser Anleitung lesen.

¡Atención!

Resulta fundamental que lea este manual de instrucciones antes de realizar el montaje, el mantenimiento

y de utilizar este producto

Attenzione!

E’ importante leggere le istruzioni contenute nel presente manuale prima di montare il prodotto, svolgere

le operazioni di manutenzione sullo stesso e metterlo in funzione.

Let op!

Het is van essentieel belang dat u de instructies in deze gebruiksaanwijzing leest voor u het product

monteert, onderhoudt en gebruikt.

Atenção!

É fundamental que leia as instruções deste manual antes da montagem, manutenção e operação do

aparelho.

OBS!

Det er vigtigt, at man læser instrukserne i denne brugsanvisning, inden man samler, vedligeholder og

betjener produktet.

Observera!

Det är viktigt att du läser instruktionerna i manualen före montering, användning och underhåll av

produkten.

Huomio!

On tärkeää, että luet tämän käsikirjan ohjeet ennen tuotteen kokoamista, huoltoa ja käyttöä.

Advarsel!

Det er viktig at du leser instruksjonene i denne manualen før sammensetning, vedlikehold og bruk av

produktet

Внимание!

Необходимо прочитать инструкции в данном руководстве перед сборкой, обслуживанием и

эксплуатацией этого изделия.

Uwaga!

Koniecznie należy przeczytać instrukcje zawarte w tym podręczniku przed montażem, obsługą oraz

konserwacją produktu.

Důležité

upozornění!

Neinstalujte, neprovádějte údržbu ani nepoužívejte tento výrobek dříve, než si přečtete pokyny uvedené

v tomto návodu.

Figyelem!

Fontos, hogy a termék összeszerelése, karbantartása és használata előtt elolvassa a kézikönyvben

található utasításokat.

Atenţie!

Este esențial să citiți instrucțiunile din acest manual înainte de asamblare, efectuarea întreținerii și

operarea produsului.

Uzmanību!

Ir svarīgi izlasīt šīs rokasgrāmatas instrukcijas pirms uzstādīšanas, apkopes un preces darbināšanas.

Dėmesio!

Prieš surenkant, prižiūrint ir naudojant gaminį, būtina perskaityti šiame vadove pateiktus nurodymus.

Tähtis!

Enne masina kokkupanekut, hooldamist ja kasutama hakkamist tuleb käesolevas juhendis esitatud juhised

kindlasti läbi lugeda.

Upozorenje!

Vrlo je važno da ste prije sklapanja, održavanja i rada s ovim proizvodom pročitali upute u ovom priručniku.

Pomembno!

Pomembno je da pred montažo vzdrževanjem in uporabo tega izdelka preberete navodila v tem priročniku.

Upzornenie!

Je dôležité, aby ste si pred montážou, údržbou a obsluhou produktu prečítali pokyny v tomto návode.

Важно!

Изключително важно е да прочетете инструкциите в настоящото ръководство, преди да преминете

към сглобяване, поддръжка или работа с продукта.

Важливо!

Дуже важливо, щоб ви прочитали інструкції в цьому керівництві перед складанням, обслуговуванням

та експлуатацією цієї машини.

Dikkat!

Ürünün montajını, bakımını yapmadan ve ürünü çalıştırmadan önce bu kılavuzda yer alan talimatları

okumanız önemlidir.

Προσοχή!

Είναι πολύ σημαντικό να διαβάσετε τις οδηγίες στο παρόν εγχειρίδιο πριν συναρμολογήσετε, συντηρήσετε

ή λειτουργήσετε το προϊόν.

Subject to technical modication | Sous réserve de modications techniques | Technische Änderungen vorbehalten | Bajo

reserva de modicaciones técnicas | Con riserva di eventuali modiche tecniche | Technische wijzigingen voorbehouden

| Com reserva de modicações técnicas | Med forbehold for tekniske ændringer | Med förbehåll för tekniska ändringar |

Tekniset muutokset varataan | Med forbehold om tekniske endringer | могут быть внесены технические изменения |

Z zastrzeżeniem modykacji technicznych | Změny technických údajů vyhrazeny | A műszaki módosítás jogát fenntartjuk

| Sub rezerva modicaţiilor tehnice | Paturam tiesības mainīt tehniskos raksturlielumus | Pasiliekant teisę daryti techninius

pakeitimus | Tehnilised muudatused võimalikud | Podloæno tehniëkim promjenama | Tehnične spremembe dopuščene

| Právo na technické zmeny je vyhradené | Подлежи на технически модификации | Є об’єктом для технічних змін |

Teknik değişiklik hakkı saklıdır | Υπό την επιφύλαξη τεχνικών τροποποιήσεων

Safety, performance, and dependability have been given

top priority in the design of your nailer.

INTENDED USE

The nailer is intended to be used only by adults who have

read and understood the instructions and warnings in this

manual, and can be considered responsible for their actions.

The product is intended to drive nails in soft materials such

as wood.

This product is not suitable for ﬁ xing electric cables.

The product is intended for consumer use only.

Do not use the product for any other purpose. Use of the

product for operations different from intended could result in

a hazardous situation.

WARNING! Read all safety warnings, instructions,

illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

NAILER SAFETY WARNINGS

■Always assume that the tool contains fasteners.

Careless handling of the nailer can result in unexpected

firing of fasteners and personal injury.

■Do not point the tool towards yourself or anyone

nearby. Unexpected triggering will discharge the

fastener causing an injury.

■Do not actuate the tool unless the tool is placed

firmly against the workpiece. If the tool is not in contact

with the workpiece, the fastener may be deflected away

from your target.

■Disconnect the tool from the power source when the

fastener jams in the tool. While removing a jammed

fastener, the nailer may be accidentally activated if it is

plugged in.

■Use caution while removing a jammed fastener. The

mechanism may be under compression and the fastener

may be forcefully discharged while attempting to free a

jammed condition.

■Do not use this nailer for fastening electrical cables.

It is not designed for electric cable installation and may

damage the insulation of electric cables thereby causing

electric shock or fire hazards.

ADDITIONAL SAFETY WARNINGS

■The tool is designed for single-hand use. Do not hold

the tool by the front of the magazine. Do not put hands,

head, or other parts of your body near the bottom of

the magazine where the nail exits the tool, as serious

personal injury could be caused.

■Always ensure that the workpiece contact is fully

positioned above the workpiece. Positioning the

workpiece contact only partially above the workpiece

could cause the nail to miss the workpiece completely

and result in serious personal injury.

■Do not drive nails near edge of material. The workpiece

may split causing the nail to ricochet, injuring you or a

coworker. Be aware that the nail may follow the grain

of the wood, causing it to protrude unexpectedly from

the side of the work material or deflect, possibly causing

injury.

■Keep hands and body parts clear of immediate work

area. Hold workpiece with clamps when necessary to

keep hands and body out of potential harm. Be sure

the workpiece is properly secured before pressing the

fastener against the material. The workpiece contact

may cause the work material to shift unexpectedly.

■Keep face and body parts away from back of the tool

cap when working in restricted areas. Sudden recoil can

result in impact to the body, especially when nailing into

hard or dense material.

■During normal use the tool will recoil immediately after

driving a fastener. This is a normal function of the tool.

Do not attempt to prevent the recoil by holding the nailer

against the work. Restriction to the recoil can result in

a second fastener being driven from the nailer. Grip

the handle firmly, let the tool do the work and do not

place second hand on top of tool or near exhaust at any

time. Failure to heed this warning can result in serious

personal injury.

■Do not drive fasteners on top of other fasteners or with the

tool at an overly steep angle as this may cause deflection of

fasteners which could cause injury.

■Always check the work area for hidden wiring, gas lines,

water lines, etc., before using the product on such work

area.

■After using the product in the contact actuation mode,

switch it back to the full sequential mode.

■The driving depth of the nail may be adjusted beyond

air pressure. It is advisable to test the depth on a scrap

workpiece to determine the required depth for the

application.

■Only fasteners matching the description in the product

specification table can be used with this tool. Using

incorrect fasteners may lead to jamming or other

malfunctions.

■Always remove the battery before adjusting the depth

of drive wheel.

■Do not pull back on the adjustment wheel, the wheel is

designed to be rotated.

■Do not press the trigger while adjusting the depth of

drive wheel.

■Always select full sequential firing mode before adjusting

the depth of drive.

■Do not point the tool towards yourself or anyone nearby

when adjusting the depth of drive.

■Clamp workpiece with a clamping device. Unclamped

workpieces can cause severe injury and damage.

■The product will restart automatically if stalled. Switch

off the product immediately if it stalls. Do not switch

on the product again while it is still stalled, as doing so

could trigger a sudden recoil with a high reactive force.

Determine why the product stalled and rectify this,

paying heed to the safety instructions.

■Ambient temperature range for tool during operation is

between °C and °C.0 40

■Ambient temperature range for tool storage is between

0 40°C and °C.

■The recommended ambient temperature range for the

charging system during charging is between °C and 10

38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

■To reduce the risk of fire, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in fluid or allow a fluid to

ENGLISH

Original Instructions

Termékspecifikációk

Márka:	RYOBI
Kategória:	Körömápoló készlet
Modell:	One+ R18GN18X

Szüksége van segítségre?

Ha segítségre van szüksége RYOBI One+ R18GN18X, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Körömápoló készlet RYOBI

RYOBI One+ R18GN18X Útmutató

11 Augusztus 2024

RYOBI One+ R18N16G Útmutató

14 Július 2024

Útmutatók Körömápoló készlet

Legújabb útmutatók Körömápoló készlet

5 Január 2025

5 Január 2025

5 Január 2025

5 Január 2025

5 Január 2025

5 Január 2025

5 Január 2025

Visage GT-MP-03 Útmutató

3 Január 2025

Medel Manicure/Pedicure Expert Útmutató

27 Szeptember 2024

Laica SB2400 Útmutató

21 Szeptember 2024