Használati útmutató Russound MBX-PRE

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Russound MBX-PRE (31 oldal) a Audiostreamer kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/31
Setting up Chromecast on the MBX-Series products (Recommended
for ALL installations)
Setting up Chromecast is quick and easy on the Russound MBX-Series of
products. The Google Home app will walk you through all of the steps
and can even be used to configure the Wi-Fi settings on a new Russound
device. If you don’t have the Google Home app yet, please download it
from the App Store/Play Store before proceeding.
For Wired Ethernet Installations
1. Make all wiring connections including ethernet and power up the MBX
product
2. From a device on the same network as the MBX product, open the
Google Home app and select “Discover”. Follow the prompts to set up
the device.
3. Name the MBX product. Refer to the MBX product’s installation
manual for recommended names. Note that Google Home appends
the word “speaker” automatically. You can remove the “speaker” from
the name afterwards by editing the device settings if you don’t want it
in the device name.
4. Finish configuring the MBX product using WebConfig
For Wi-Fi Installations
1. Make all wiring connections and power up the MBX product
2. From a device on the network that you want to add the MBX product
to, open the Google Home app and select “Discover”. Follow the
prompts to set up the device including appropriate Wi-Fi network
settings.
3. Name the MBX product. Refer to the MBX product’s installation
manual for recommended names. Note that Google Home appends
the word “speaker” automatically. You can remove the “speaker” from
the name afterwards by editing the device settings if you don’t want it
in the device name.
4. Finish configuring the MBX product using WebConfig
IMPORTANT NOTE
Ideally, the MBX devices should be set up using the homeowner’s
iOS or Android device using the homeowner’s Google Home app.
If this is not possible, the installer can set up the devices on the
installer’s Google Home app and once configured and named, the
homeowner (and anyone else with a Google device on the Home-
owner’s home network) can cast to and communicate with the MBX
products. Only the original Google Home account user can
reconfigure/re-name Chromecast devices like the MBX products.
This may be advantageous to an installer to make sure that a
customer doesn’t inadvertently tamper with any device settings and
it is up to the installer to decide the best way to install and configure
the devices for use with Chromecast for his/her customers.
©2018 Russound/FMP, Inc. All rights reserved. Russound and the Russound logo are registered trademarks of
Russound/FMP, Inc. Russound reserves the right to change specifications without notice.
MBX-PRE
Streaming Media Pla
Installation Manual

Termékspecifikációk

Márka: Russound
Kategória: Audiostreamer
Modell: MBX-PRE

Szüksége van segítségre?

Ha segítségre van szüksége Russound MBX-PRE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Audiostreamer Russound

Russound

Russound MBX-AMP Útmutató

30 Augusztus 2024
Russound

Russound MBX-PRE Útmutató

30 Augusztus 2024

Útmutatók Audiostreamer

Legújabb útmutatók Audiostreamer

Arcam

Arcam ST25 Útmutató

14 Január 2025
Audiolab

Audiolab 9000N Útmutató

31 December 2025
Block

Block A Útmutató

12 Október 2024
Bluesound

Bluesound NODE ICON Útmutató

24 Szeptember 2024
Nedis

Nedis BTTR050BK Útmutató

23 Szeptember 2024
Amazon

Amazon Echo Show Útmutató

21 Szeptember 2024
NAD

NAD C 700 V2 Útmutató

18 Szeptember 2024