Használati útmutató Ross USBPP2

Ross power bank USBPP2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ross USBPP2 (3 oldal) a power bank kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/3

USBPP2 – Power Pack 2000 - (BLACK)

Model Number: USBPP2-RO

User Manual

Please read this manual thoroughly before using your Ross Power Pack and then retain for future reference

1.1 Important Safety Instructions:

• Please read these instructions carefully and retain for future reference. If you sell, or give this aerial away be sure to pass on the instructions.

• There are no user serviceable parts inside this unit. open there are dangerous voltages inside. Electric shock hazard.DO NOT

• This unit operates on a 2000mAh capacity

• During use, this device may become warm, this is normal.

• The marking plate is located on the bottom enclosure of the apparatus.

• DO NOT place naked ames (such as candles) on this equipment.

• DO NOT operate close to heaters or other heat sources.

• DO NOT stand on soft furnishings

• DO NOT operate this unit in damp conditions or allow water or other uids to enter the enclosure. If this happens, switch o IMMEDIATELY

and refer the device to the Ross helpline.

• DO NOT clean this device using solvent based products. Use only a soft dry cloth.

• DO NOT leave this product in a hot or humid environment.

1.2 General Information

• Thank you for choosing the Ross Power Pack 2000 (Black). Treated with care and used in accordance with the contents of this manual

it will provide many years of reliable service

• This symbol indicates that, at the end of its useful life, this product must not be disposed of with normal domestic waste. To prevent

possible harm to the environment or human health from uncontrolled waste disposal, please recycle it responsibly.

• This product conforms to all applicable EU legislation for this type of product. Further information can be obtained

from Ross if required.

2.0 In the Box:

Please open your box carefully and check the contents which

should be as the list below: If anything is missing please contact

the Ross helpline or return the product to the point of purchase.

• Ross Power Pack

• USB to Micro USB cable 30cm or 11.8 inches

• User manual

3.0 Product Specications

Please nd the detailed specications for the Ross Power Bank below:

• Real Capacity: 2000mAh

• Input: 5V / 1A

• Output: 5V / 1A

• Battery: Lithium Polymer Battery

• Weight: 60.5g

• Dimensions (L*W*H) 61*71*12mm

• Charging Time: 2.5 Hours

• Static Power Consumption: 20µA≤

• Cycle Life: > 500 Times

4.0 Product Features

Please nd details of the Ross Power Pack below:

• An excellent choice for instant portable power, simply connect your portable device via the USB socket & press the button for instant charging

• Light-weight, compact and robust design

• Long service life, more than 500 charging/discharging

• LED Power indicator to show the charge status

• Includes 11.8" (30cm) Micro USB to USB charge cable

• The use of advanced intelligent protection chip, overcharge, discharge, short circuit and leakage protection

5.0 Product Instructions

The product will require charging upon purchase. The cable provided will charge the power bank with power and depending on the connector

type of your device (Cable is Micro USB) you can also use the cable to charge your device.

5.1 Product Details

5.2 Charging the Power Bank

Using the provided cable, connect the Micro USB via the Micro USB input interface, connect the USB end of the cable to an appropriate

charging port (Examples include a USB plug or a USB input interface on a laptop). The Blue LED indicator lights will start to ash. Charging

should take approx. 2.5 hours, however when fully charged the LED indicator lights with all be continuously on. Once fully charged

disconnect the cables.

5.3 Charging a device

To charge a device with another connector type other than Micro USB (iPhone for example). Then use the original cable supplied with the

device you are charging. Place the USB end of the cable into (3 USB 1.0A output interface, then place the connector into your device.

Press the power indicator light. The charge icon on your device should now indicate your device is charging.

To charge a device with another connector type other than Micro USB (iPhone for example). Then use the original cable supplied with the

device you are charging. Place the USB end of the cable into (3 USB 1.0A output interface, then place the connector into your device. Press

the power indicator light. The charge icon on your device should now indicate your device is charging.

Your device will charge at various speeds depending on the voltage of the device, for larger devices which require larger output the Power

Pack will oer an extension to the life of the battery charge, but may not fully recharge the device.

5.4 LED Indicators

The LED lights are a direct indication of how much charge is in the device. You can check this at any time by pressing the power indicator button.

4 LED Lights: 75- 100% Power Capacity

3 LED Lights: 50-75% Power Capacity

2 LED Lights: 25-50% Power Capacity

1 LED light: 0-25% Power Capacity

6.0 Additional Notes & Tips

• The product can become warm when in use this is normal.

• For rst time charge the product may need 8-10 hours to become fully charged.

• The product will lose charge if left for a long period of time without use.

• Please ensure you keep the USB ports on the device clean, if they require cleaning use a dry cloth.

Technical Support UK: 0845 194 7584 • Email: help@ross.co.uk

① 4 level indicator light

② Power Indicator Light button

③ USB 1.0A output interface

④ Micro USB input interface

①

②

③

④

Termékspecifikációk

Márka:	Ross
Kategória:	power bank
Modell:	USBPP2

Szüksége van segítségre?

Ha segítségre van szüksége Ross USBPP2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók power bank Ross

Ross USBPP2 Útmutató

29 Július 2024

Ross USBPP52 Útmutató

29 Július 2024

Útmutatók power bank

Legújabb útmutatók power bank

ACOPower HY-PWM-PX20A Útmutató

15 Január 2025

ACOPower HY-MY40 Útmutató

15 Január 2025

ACOPower HY-PTP-100W Útmutató

15 Január 2025

ACOPower HY-AS-MT50 Útmutató

15 Január 2025

ACOPower HY035-12P Útmutató

15 Január 2025

ACOPower HY100-12P Útmutató

15 Január 2025

ACOPower HY025-12P Útmutató

15 Január 2025

ACOPower HY015-12P Útmutató

15 Január 2025

ACOPower HY-SG-PS500 Útmutató

15 Január 2025

ACOPower LiONCooler X40A Útmutató

15 Január 2025