Használati útmutató Rolls SX45

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rolls SX45 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
The SX45 is a unique frequency dividing device for sound re-
inforcement applications. The unit features a 12 dB/Octave roll
o rate, a frequency dividing range of 50Hz to 2.5kHz, and an
external power supply for noise reduction.
DESCRIPTION
FRONT PANEL
INPUT: Adjusts the input level to the SX45.
FREQUENCY: Selects the crossover frequency from 50Hz to
2.5kHz.
LOW LEVEL: Adjusts the amount of output signal from the LOW
OUT jacks.
HIGH LEVEL: Adjusts the amount of output signal from the HIGH
OUT jacks.
CLIP LED: Indicates overload in the SX45. This LED lights 3 dB
before actual circuit clipping occurs.
PWR LED: Indicates the SX45 power supply is connected to the
unit and an AC outlet.
SX45 Stereo Two-Way Crossover
Connection guide
SPECIFICATIONS:
Input Impedance: 10K Ohm
Output Impedance: 1K Ohm
Headroom: +10 dBV
Power Requirements: 12 - 15 VDC, 150-500 mA;
Rolls part number PS27s
Size: 4.25” x 3.625” x 1.5”
Weight: 1 lb.
Rolls Corporation
Salt Lake City, UT
9/18
What's in the box?
1 - Made in USA SX45
1 - 15V power supply PN PS27s
1 - This owners manual
• 12 dB/Octave roll o
• Stereo RCA Input and Outputs
• 50Hz to 2.5 kHz crossover range
• Mono Sub Output
Connect the Inputs of the SX45 to the output of a mixer or other device
containing the stereo signal to be divided. This signal should be Line-
Level, or reference 0 to +4 dB. The High and Low Outputs should be
connected to the proper amplier and speaker combination.
Set all SX45 Levels to zero. Begin by applying signal from the mixer/
signal source to the SX45. Carefully increase the Input Level until you
see the Clip LED begin to blink. Slightly reduce the Input Level from this
point. This should insure a proper input signal level without clipping,
thereby giving you the best noise performance.
Set your ampliers to their normal operating level (many ampliers
are simply set at their full volume level). Carefully begin increasing
the SX45 High and Low Level controls until you reach a desired
and balanced volume level.
REAR PANEL
(Note: The rear panel jacks are labeled on the top of the unit.)
INPUT: Dual RCA jacks for connecting to the output of a mixer or other
device containing the signals to be divided.
HIGH OUT: Dual RCA jacks containing the signal of frequencies above
the crossover frequency.
LOW OUT: Dual RCA jacks containing the signal of frequencies below
the crossover frequency.
MONO LOW OUT: Dual RCA jacks with a mono, combined signal from
the stereo Low Out jacks.
DC IN: For connection to the Rolls model PS27s.

Termékspecifikációk

Márka: Rolls
Kategória: nincs kategorizálva
Modell: SX45

Szüksége van segítségre?

Ha segítségre van szüksége Rolls SX45, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Rolls

Rolls

Rolls MU118 Útmutató

11 Január 2025
Rolls

Rolls HR341 Útmutató

4 Szeptember 2024
Rolls

Rolls PM61 Útmutató

4 Szeptember 2024
Rolls

Rolls MP213 Útmutató

4 Szeptember 2024
Rolls

Rolls SX45 Útmutató

2 Szeptember 2024
Rolls

Rolls DB24 Útmutató

2 Szeptember 2024
Rolls

Rolls MS112 Útmutató

1 Szeptember 2024
Rolls

Rolls HA204p Útmutató

1 Szeptember 2024
Rolls

Rolls RA53b Útmutató

1 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva